Lowering a RAM 1500 Pickup Truck
ฝัง
- เผยแพร่เมื่อ 13 เม.ย. 2022
- Lowering a RAM 1500 Pickup Truck we use the Belltech suspension kit to lower this ram 1500 with a 2/4 drop 2" lower in the front and 4" lower in the rear with belltech shocks and lowering springs and nitro drop shocks
Click HERE for the same kit for a 2wd single cab
amzn.to/3KNPy9W
Click HERE for the same kit for a 2wd Crew cab
amzn.to/3Ee1DTA
Click HERE for the same kit for a 4wd
amzn.to/3jH14Ih
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com/shop/boostedmo...
Support BoostedMotorsports by JOINING Today! / @boostedmotorsports
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#dodge #srt #mopar #hemi - ยานยนต์และพาหนะ
Click HERE for the same kit for a 2wd single cab
amzn.to/3KNPy9W
Click HERE for the same kit for a 2wd Crew cab
amzn.to/3Ee1DTA
Click HERE for the same kit for a 4wd
amzn.to/3jH14Ih
**Checkout other cool products Boosted Motorsports has tested and recommends HERE** 👇
www.amazon.com/shop/boostedmotorsports
Support BoostedMotorsports by JOINING Today! th-cam.com/channels/3B_Q1mNw1iuS8KkAZi_fUA.htmljoin
quick question… will the 4WD kit work on a single cab? I have a 17 express single cab
@@memoslaps been wondering this forever, can’t find answers
@@SammTC still haven’t found a straight answer bro it’s been a whole year 😂
its perfect height. I plan on doing this to my truck as well. this video helps with assuring these lowering kits are an easy install. thanks john
Mike, would love to finally see someone install one of these Bell Tech 2/4 kits on a 4wd with factory air suspension. I badly want to do this to my 15 longhorn and rid it of the air setup but don't even know the extra pieces I would require outside of the kit. Contrats on the channel, the house/shop and move. you've helped so many of us for so long with our Rams. Love living vicariously through you Sir. I bet I lowered 10+ 2wd Dakotas back in 'the day' 99-04 just like this. Keep up the great work!!
I have 2014 Ram RT, and seeing your progress really giving me ideas, mostly the headlights and lowering 👍👍💯💯
Just did this to my truck and this video helped a ton! Thank you, the results are awesome! Just gotta take it for alignment and she's good to go! I also put some air ride air bags in the rear (ones for a durango fit best for lowering). Thanks john! ❤
Man this look and the whole truck build is so sick! Watching a dream truck being built!
That truck looks absolutely badass slammed like that! Thanks for the excellent tutorial on this mod!
Love the new drop! Looks so much better, especially with the 22 inch wheels!
I looks just right at that height, everything you do is top notch attention to detail. You've given me inspiration with mine on this build. I will keep watching, thanks for all the videos and info. Looking at pics of a new belltech rear spring and looking at yours, if you count the coils it does appear they've been trimmed a couple. Would like mine to sit about there.
I was always told to tighten the panhard bushing once the truck was on the ground so it is not twisted. Looks awesome!!
You always make this look so easy . I loved it .keep on keepin on my brother.
Had a belltech kit on my tbss. Loved the price and the handling
I love this truck. You've done a great job with it so far.
Thanks brother
Looks sick man but I'm biased I have pretty much the same truck!
I did this install on my R/T about a year ago, and when I got to installing the front shocks I ran into the issue you described but I didn't know I could just take off that cap so I'm still running the stocks in front.
Looks like I have a project this weekend!
As always, excellent content and knowledge. Glad to see a two door version of what my crew will look like lowered. 🤟🏾
Thanks brother 💪
Wow looks really good man🔥
Nice job, looks good!
Looks awsome man, my 08 has a leaf spring setup and tow package. Looking to lower it in the future
Looks great!
Looks great
Truck looks really good John
2016 ram crew cab 2/4 belltech drop and love my truck but can’t wait for a upgraded shocker to be released. Currently running 305/40/22 with helper bags in the rear
If it was my only truck I would have left it at the stock height but it looks really good that way man thanks again and all from Northern California 👏 👍
I tell you what it does look like the Kota lowered like that looking awesome John!!!!
Looks so damn good
Awsome video 👍🏽🤘🏽
Nice job looks cool
I would love to see how it looks with a 17” drag pack. Build is coming along well bro!! Keep it up
Soon!!
It does look fantastic 😻
Love it! Wanna lower my 5th gen!
Looks great!!!!!!! well done
Thanks james
Looks good looks a little lower in the rear than mine with the same kit. I was able to get the front shocks in with the sheilds just had to jangle around with it.
Just traded in my 2014 ecodiesel that I had that 2/4 kit on with 24s.. got a 2018 1500 limited with the hemi, it has air suspension.. so need to figure that out how to get it lower safely.. that single cab looks awesome lowered!!
Ok, now do the intake!! 😁😜
It turned out perfect to me.
Love it!!! 2/4 is perfect on it!!!.
It will be one of the pimpest low rider trucks on the planet especially after the HELLCAT swap!! So sick brother!!!!
🤔🚫🧢🚙💨💯🌮
Dude those headlight are so hard! They look like the new limited headlights. I like em a lot.
thats perfect!
Loving all it ..
looks great ..
looks sharp
Yea, it setting way better now! Btw ordered my new engine from demon Proformance yesterday for the track hawk!
Great vid. Lil truck has come a way. Keep up the good work. What size tires are you running w/factory 22’s
Yes, she looks good now
I have 22” wheels running 305 45 with the 2/4 bell tech drop. I asked the shop to cut an inch off the rear springs to make it look semi leveled but yours looks a lot more lowered than mine!
His are also cut ✂️
Perfect
Great job on lowering the truck Jon. Looks awesome. Maybe I’m in the minority here but I think the 20” wheel’s from the eco diesel would look better on this truck. They would look better proportioned on the single cab truck. You would save some weight too. Less rotational mass. I hear those 22” wheels are pretty heavy.
I did this same mod! I miss my 12 Ram 1500 ST so much! Everyone who has the crew cabs btw the kit is different than this regular cab reg bed! check part numbers!
Hey tahat was a good “vato loco” impersonation bud 😂🤣
🤣😂
I used a crowfoot on an extension for the upper bolt, was still a pain in the ass
I like it man 🤙🏽 low key I want to lower my ram now, have you notice any cons in your every day driving tho ?
Hey man I really enjoy your Ram videos. You have a lot of great advice! I have a 14 Laramie that's 2 wheel drive I was wondering if it would be possible to convert it to 4 wheel drive and how much work would be involved. Do you think it's possible to do or is it not worth my time and effort?
Core 4x4 rear control arms for the win! Stockers can't handle the juice!
This was a pretty good video. Your instructions were great. How was the drive after doing the installation? did you have to add any air bags for a smoother ride? if you added airbags did you do the install yourself?
Love it as you say that’s spicy boz
We only bring the spice 😈🤘
2/4 looks perfect. What size tire do you have on the 22s?
I love the 2/4 drop on the Rams. I have a 2wd Ecodiesel and want to do a drop on it soo bad!
I wouldn’t do it to my daily ecodiesel since I use it for towing and daily driver but on this weekend truck I like it!
I don’t tow at all with my Ecodiesel, I have a Cummins for that. You still wouldn’t recommend a 2/4 drop on a daily truck?
Like it the way it is
Looks really good! something tells me the guy that had that kit cut a few coils cause my 2/4 kit doesn’t sit that low and don’t forget to check that cross member in front of the gas tank probably really close to the drive shaft.
Yup mine doesn’t sit this low either. I want it a little lower but I don’t wanna pay that much for the 4/6😂 and yes my driveshaft rubbed the crossmember when I first installed it
Same here. When I saw the video pop up on alerts, I thought it was a 5/7 drop. Good looking stance.
I double checked. No cut springs. What size wheels are you guys running cause these 22s fill the wheel wells more usually. They have 285/45-22 tires
Mine sits that low with the belltech 2/4 drop
@@BoostedMotorsports i have a friend on a 2/4 drop on some r/t 22’s and his doesn’t look nearly as low as yours, not calling you wrong but it looks awesome regardless
Blue calipers would look sick behind the R/T wheels 💯
💪
At least the bearings are super easy to change on the 2wd rams.
Where did u get those red bump stoppers from?! Much appreciated, I wana do a 2/4 drop on my ram as well
Hey John what is the best shocks and springs to get for the fourth gen ram 1500. Also looking to do a leveling kit as well
Dam John the thumbnail looked like the Kota!!!!!
My 04 I did with Belltech drop leafs and the front was done with drop spindles...not coil springs. Why do they do it with coils now instead of drop spindles?
After doing 4 of these kits on 4th gens I’ve learned that putting shorted sway bar end links improved the ride and handling.
Is that for front or rear sway bar links?
@@KJ-wo2iy you want your sway bars to sit level. Most kits only come with end links for the rear.
@@michaelguillory3100 Ok Thanks 👍🏼
Gotta 2012 ram single cab 1500 with 2/4 had the kit on for about 2 years now and the ride is trash I just recently bought some more bell tech street shocks but I don’t think that’s gonna solve the problem any advice on how to get a decent ride quality out of it ?
Nice. Bump stop link. ?
could you put a link for the new bump stops?
I put the same shocks on my Ram Daytona and had to sand and file the opening in the control arm to get the boot to fit through. Also, can you show the shock after it was installed? The two bolts on top of the shock kinda confused me. Thanks!
Good evening I know I'm kind of late with this question how does your blue ram rides with the relocation brackets on it and did it lower back anymore
Does this kit fit a V6 3.6 2wd quad cab all the kits i see say for 5.7
What you do to correct the front negative camber? I want to do this in my truck but I dont wanna kill my tires.
What air bags are you using with the 2-4 drop. Thanks
@BoostedMotorsports where did you get your bump stops at?
Did the belltech come with the upgraded sway bar! I put the Inez 5 7 drop and it came with the sway bar
Hey do you still have to get it aligned with just this “spring” kit?
Is this set up the same for the hemi 4x4 regular cab?
Can you help - I own a roe viper gen 2 also but have cold start idle issues since Install - we have changed all sensors vacuum leak test etc all good - leads me to idle screws were played with. - what percentage is your Throttle position. Sensor at if you don’t mind sharing this it’s a good start for my adjustments - thanks for you help
Fire. I want to do this to my 2020 big horn but im unsure what to purchase. Can you help me out?
Have a question, would this kit work with the 2021 ram 1500 classic single cab even though it like damn near identical to your truck?
Were did you purchase the front bumber??? Helpp
Where do you get the no cut relocation brackets?
can't believe it's a truck without leaf springs in the back..
you thinking roll pan bumper on this baby too? would be legit to see that install
Guys i have a 2018 ram 1500 2wd regular cab, i want to drop the rear 3 inches to level the truck, any suggestions or ways to do it ?
Looks better👍🏼👍🏼…Aloha 🤙🏽
How is the ride quality vs stock with pot holes and towing?
So no sway issues with the relocation brackets?
Damn john what a transformation on this truck looks freaking awesome 👌 perfect low height #BSTEDMTRSPRTS
Did you have the rear sway bar?
this drop looks good but on mine the back of the driver side sits higher than my passenger, would you happen to know what is causing that ?
I wanna do mine but scared of the cut or no cutbrackets . I dont wanna loose my trans because its not right
Did u take a before and after measurement?
Haha you funny af bro
Anyone know what happens if you dont replace oem bump stop? Cause mines hitting and every time i go over small bumps or bad roads it cluncks like crazy all my suspension is new was wonder if the cause is for not replacing that bump stop?
Hey wats ip bro wats better spindles or just the lower spring
Where can I get those red bump stops ?
How does those headlights work on the road at night??
Is the front bumper a different color? Looks lighter
What about a kit for a 2wd quad cab
I don't know if it's a Ram thing but it seems like the left side wheel bearing always goes bad first, I had the same issue with mine, changed the left side wheel bearing about 2yrs ago.