How to remove tire and wheel on Joyor 5 and s10s to change or fix tube (no front motor)
ฝัง
- เผยแพร่เมื่อ 18 ก.พ. 2023
- I’ve been asked to make a video on how to get the wheel and tire off on the Joyor.
So here is the how to and Hope this helps everyone…
Buy here
www.joyor-escooter.com/?ref=n... - กีฬา
thanks for the vid! just ordered the s5 "800w" . i am so excited , you are the only youtuber i see making vids on this platform!
I tend to make videos on stuff that others don’t , it just kind of happens
But at least I’m helping others the best I can …
Amazing job, keep it up
thanks for this I have S5 it will help me a lot
Dave great job. However, it would be nice to see the upclose views as you do the fine adjustments. The far away angle is ok but def would be good to have seen while you doing the fixing & adjustments.
Hey David how are you can the joyor s5 Moto. Change on the hold back wheel ?
👍🏾 love the vids on these scooters
Thanks
I’m just listening to my viewers
@@DavidsHowtosReviews opinion on tire slime? I read somewhere that most tire issues come from under inflated rings pinching and leaking so I haven’t added any I just check pressure each time. I have some, but haven’t added yet. 210 miles
Put slim in keep pressure up if you get a puncture you can then get to and from there you are going then change the inner tube, and add slime again.
It’s like having run flats.
Slime is not for getting a nail in tire and just keep going.
In my opinion
Really do appreciate the videos as stated by the previous person you are the only one I've came across on here who does videos on the S5. On that note I've owned one for the better part of a month now which I got off Amazon. My main issue I can't seem to find much if any info on this model I've even joined Facebook group with very little luck. So if possible and that is if you haven't can you please make a video on any tips,tricks and tweaks for the S5 thanks much and also please do keep up the amazing job you are doing👍👍👍
I do have a question answered
I will be doing a how to get the rear tire off some viewers seem to have trouble with the back tire
But definitely do not go through deep water these are not water proof.
I also have the other new short that has the other name that this goes under and other place to buy parts
Hello I have a question, do you know what if 10 inches Solid Tire,10x2.5 60/70-6.5 fix on the S5 scooter? I have same scooter you have the S5 but I need the solid tires and I keep looking on Amazon and I can’t find the right ones, can you help me with that please.
cant seem to pull apart the forks on the TN-X3 rear assembly with just our sheer arm strength, would a spreader/clamp or some sort of tool to apply a little more force work? its almost in tbh, it looks like it needs a few millimeters!
You can also try using a big pipe wrench put a towel over the orange arm to protect paint, opening the jaws enough to slide over the arm, push to the platform direction you may need to hold the handlebars with your feet to keep from twisting, if you don’t have a big enough pipe wrench put a long pole over the handle to game more leverage
That disk all wabblie 🤣🤣
So I have an S10. I had a bad fall on friday, I found that the front tire was flat, no way to see it visually. I tried to put air in it today, and it sounded like air was coming from the seal. SO, these things have tubes??
Yea these have little tire tubes you can get 2 on Amazon cheap.
Always use ur foot step on tire to ck it
a.co/d/eMtxekD
I have a video on taking the wheel and tire
Of the scooter
Hope your ok
ThanK you. I really thought that the tires where tubless, I actually was able to narrow it down to this exact amazon purchase. On the way. The inner tubes that came with the scooter are crap.@@DavidsHowtosReviews
Awesome
U need the special socket or make a notch in a cheap one to get the axle nuts off
I was able to get it off by putting an 18mm wrench perpindicular to the nut, So 90 degrees, and a pair of channel locks to get the nutt off. I just need to figure out how to get the tire/old tube off now..@@DavidsHowtosReviews
👍
Thanks for the video! Anyone know if you could you replace the tubed tires with tubeless ones on the Joyor S5/10-S (or Kukirin G2 Pro/Max)? Or would you have to change the rims too?
Tubeless
FACULX 2PCS 10 Inch Electric Scooter Tire Solid Tire 255x70/10x2.50-6.5 70/65-6.5 Universal Tyre for Electric Scooter, Balance Car a.co/d/bPqm8YQ
Solid Tire 10 Inch, 10x2.70-6.5 solid tire 70/65-6.5 Scooter Tubeless Puncture-Proof Tire, Explosion-Proof Rubber Solid Tires, Shockproof Design, Super-Grip Wheels Replacement (10x2.70-6.5 tire) a.co/d/chWSMpR
Sorry what tool did you use at the start of the video to unscrew the nut?
They make a axle nut tool now for e scooters
I have the s10-s dual motor. Just got a flat on the rear, what size tube do I need to buy?
(2-Pack) 10x2 Replacement Inner... www.amazon.com/dp/B07KXS8V7N?ref=ppx_pop_mob_ap_share
This does not work on the S-10, which has a motor in the rear
How do you do the dual motor the motor cable makes it impossible to put ratchet on
The other video I have I show it I just take a cheap socket and grind a line in it to let the line pass and u can use ratchet to take off
Hi thanks for the vids, could you please make a video on adding a second motor on the joyor s5.
I’m not planing on installing a extra motor on the s5
But I can show where to plug the new motor into the speed controller
And if you have your speed controller has the port to plug in the extra motor
@@DavidsHowtosReviews please show how to setup a second motor
I found a wingnut ratchet socket on Amazon that worked great for removing the rear wheel lugnut.
What size? Got a link to it?
@@user-ky1pg6qz1y 18mm. Not allowed to post links without the comment getting removed automatically
Please help. HOW in the world do you get the tire off the rim?? It looks to be next to impossible to get enough leverage to get it off. I need to replace the tube on my son's Joyor S10....it's the same one in this video I think....but I don't see any way to get the tire off. Appreciate any help/videos
There should be a extra groove inside the rim where you put part of the bead in then it will get you just enough space for two screwdrivers to pry off the bead use soapy water to help slide bead off
I have about 1/2" distance that the orange arms need to spread more, when i pull on the forks they dont increase distance at all. My front tire wont go back on no matter what
I had to use pipe wrench to spread them once best if you get help and a pipe wrench
It's hard to spread them
Just got mine today. The tires seem really low on air. Is that normal?
50lbs is what they should be set at
That’s what I run in mine
I can’t put the tire back with new tube pls help
I have s10 btw
What are you show one of the other weill that's the hard one plus I've got a dual motor so this is useless
It’s same u need a socket that has a groove cut out in it the u can let hang on wire take tire and tube off the one side