Nice bike bro. Your bike looks really good compared to mine lol, mine looks like it was from a farm. What sprocket are you using? And what top speed do you get with your setup. Just curious. Nice video.
Idk. It's a go pro 3plus. With chest mount . Idk setting I just press record and then after video insert my SD card to phone to upload I don't have a computer at moment I want one to start editing and make better videos Maybe plastic cover case for go pro stops wild noise??? Thanks a lot Im Goin to post videos of so-Cal motorized bike races this 22-23 subscribe
I don't see why a bullet case would last longer.. but if you're trying to run case reed or something a bullet case is really the only option because you won't be able to have a case read without using JB weld or fake alternatives to make a case read
@@mozezcen-valley7555 stiffer in the bearing areas, a known weak point on stock cases with higher horsepower was my guess. It's good to know that you haven't had those issues. A few people have made videos about the cases failing earlier with a scooter too end. Maybe related to crank balance too.
@@marthamryglod291 yeah I had a bearing issue as well but there were stock old bearings.. would have to say about 4 to 6 years old same with the case probably older with the case but yes this bike is going bullet aluminum piaggio top end scooter
Very nice build what's her top speed I noticed you passing a few cars I'm from Texas strict laws they catch you going over 27 mph on a flat road they can give you a ticket make you get your bike registered and plates like for a moped and if you don't have one a license to ride them I've got mine up to almost 40 I doubt it will go as fast as yours it's only a pk80 G4 cylinder cnc high compression head and mz65 clone expansion chamber pipe stay safe bro
Goes easy over 50-56 never went fast due to tuning issues by the time I started doing more tuning the bottom end went out.. basically either the crank or the bearing right now the bike is just sitting there complete I have not dedicated time and money to fix it yet because I plan on putting a different type of engine something that is even faster
@@mikemiller3303 if you look at my community post on my channel you'll see a link this is going to be for live video feed of the SoCal race on Saturday but I also will be filming so I'll be uploading race videos on motorbikes at Willow springs
It’s when a Minerelli will lock up seizing till you pull clutch in and restart the bike .. motor full blown lock up .. will restart .. it has happen to me twice on a new motor .. I have sent it back to the builder he says it’s normal for some of the piston gets caught up ?? Sounds fishy
@@matthewcartelli2625 it is fishy smolik performance kurt says he never had it happen to hes... never??? It happens to me few time. Until I got a Mikuni vm20 real Mikuni and bought Jets now I could go longer before that happens but I'm thinking to size up to a vm22
Great video bro bike sounds awesome
Theesz no way just a carb and some port work brought it up 4 hrp what else is going on bro that's bad ass
L9ve these types of convos good work man
Thanks :)
My dream build frfr i need this
Where did you get that engine and how much,what is it
Nice bike bro. Your bike looks really good compared to mine lol, mine looks like it was from a farm. What sprocket are you using? And what top speed do you get with your setup. Just curious. Nice video.
This is really dope sir! If you are using a go pro, what settings do you have to minimize wind noise? Thank you!
Idk. It's a go pro 3plus. With chest mount . Idk setting I just press record and then after video insert my SD card to phone to upload I don't have a computer at moment I want one to start editing and make better videos
Maybe plastic cover case for go pro stops wild noise??? Thanks a lot Im Goin to post videos of so-Cal motorized bike races this 22-23 subscribe
Nice ride home
I’d run a 40t and wheelie everywhere
Je le veux !! Au début du printemps..je me fait un monstre de ce genre
Pas évident mon ami
Dude that thing just needs wings
You have got to be going 50 mph at least. I love your build
Thanks yeah hits 55mph next build plan to hit 65ish if not more bullet engine hybrid case reed
More to come on the new yr 22
Safe 50mph
Bro didn’t want to tell everyone to subscribe 😂
Right ✅ ↔️
I so hope my bike runs at least this good bro ! So freaking sweet I can't wait to get mine done 👍💪👽
Really depends on your setup
@@mozezcen-valley7555 what motor and gearing are you running in this video bud
What frame ?
Looks like a beautiful bike. Maybe billet cases are needed for long life.
I don't see why a bullet case would last longer.. but if you're trying to run case reed or something a bullet case is really the only option because you won't be able to have a case read without using JB weld or fake alternatives to make a case read
@@mozezcen-valley7555 stiffer in the bearing areas, a known weak point on stock cases with higher horsepower was my guess. It's good to know that you haven't had those issues. A few people have made videos about the cases failing earlier with a scooter too end. Maybe related to crank balance too.
@@marthamryglod291 yeah I had a bearing issue as well but there were stock old bearings.. would have to say about 4 to 6 years old same with the case probably older with the case but yes this bike is going bullet aluminum piaggio top end scooter
@@mozezcen-valley7555 sweet that new motor will rip!
@@marthamryglod291 we will see how long it lasts
👍👍👍
Like step in wolf born to be wild dude
Very nice!
Thanks
Sweet ride @ what state you live in?
Cali
How do you stray away from the cops?😊
Nice bike bra
Appreciated check out my other video subscribe share and like
Very nice build what's her top speed I noticed you passing a few cars I'm from Texas strict laws they catch you going over 27 mph on a flat road they can give you a ticket make you get your bike registered and plates like for a moped and if you don't have one a license to ride them I've got mine up to almost 40 I doubt it will go as fast as yours it's only a pk80 G4 cylinder cnc high compression head and mz65 clone expansion chamber pipe stay safe bro
Goes easy over 50-56 never went fast due to tuning issues by the time I started doing more tuning the bottom end went out.. basically either the crank or the bearing right now the bike is just sitting there complete I have not dedicated time and money to fix it yet because I plan on putting a different type of engine something that is even faster
@@mozezcen-valley7555 cool I'll be watching for the next video
@@mikemiller3303 smbra.org/
@@mikemiller3303 if you look at my community post on my channel you'll see a link this is going to be for live video feed of the SoCal race on Saturday but I also will be filming so I'll be uploading race videos on motorbikes at Willow springs
Close to 7 HP ? Only 70 cc damn bro what all did it do to it
What kind of clutch are you running?
Rdm. Plate u can see my other videos I talk about it just the plate
Ta clutch échappe par boute..
Sa s enttend
Ever hear of a soft seizure?
What are you talkin about I heard about seizures
It’s when a Minerelli will lock up seizing till you pull clutch in and restart the bike .. motor full blown lock up .. will restart .. it has happen to me twice on a new motor .. I have sent it back to the builder he says it’s normal for some of the piston gets caught up ?? Sounds fishy
@@matthewcartelli2625 it is fishy smolik performance kurt says he never had it happen to hes... never??? It happens to me few time. Until I got a Mikuni vm20 real Mikuni and bought Jets now I could go longer before that happens but I'm thinking to size up to a vm22
@@matthewcartelli2625 who's the Builder
@@mozezcen-valley7555 Don Butler
Everyone loves motorized bicycles but once you try a ebike you leave the motorized bicycle Parked .
Noone thinks as dumb as u
lol no thats just you being .. SPECIAL LOL
That is until the e-bike leaves YOU parked.