CAREFUL! The car is looking fast at a standstill and with that red you are going to get a speeding ticket PARKED! Take 2 points off your Driver's License!
@@Zander13Productions .... for less than $50 bucks, you can get an infra-red portable heater, no shame in keeping your hands warm, or at least have a heat-station close by.
Looks great! I made a custom chin spoiler at my shop using 6061 aluminum for my 13 and loved it, gonna do the same on my 19 when it gets here. Dude I love your channel, keep the great content coming. I love seeing how much its grown so quickly!
Good video and the lighting really wasn't bad at all. My old garage I had to pull the car out some to work too. It sucked during winter especially in upstate NY. I found that taping plastic to the bottom of the garage door and draping it down over the car with a slit in the center worked well to keep the draft out. Fired up a salamander to get it warm enough, so your lug "nutz" aren't in your stomach, worked great. No more frozen finger tips. Also almost to 10k. Keep it moving and stay positive!!!!
Got a curb and busted my RTR. Just ordered this one and will be driving much more carefully. Damn lowered cars! She looks great man. Keep up the good work.
You just made my decision a little tougher. The splitter looks good on Carnage! Great video; good length, good subject and informative. Thanks for sharing. PEACE
That's my car in your video !! :D I would have bought this one too if it was available, this one looks a little bit more aggressive and cheaper than the RTR one. Looks great, i'm really jealous lol
A few things: I'm glad that TH-cam is coming together for you. You have a good channel and good content. Love the install videos. I do make sure to watch the commercials for you. (As much as the Netflix Sabrina ads grate on me lol) Thank you! You are the first video I have been able to find with a Chin removal. I want have have my chin and skirts painted gloss. I didn't know if it was easy or even possible to separate the Matte pieces from the painted though. Now I do. Lastly and off topic, do you think the matte diffuser on the rear will separate as well?
I was going to suggest he paint it either red or black ? Depends what grill he’s planning on getting...but then again you could paint the grills too hmmmm lol
@@tlcgtp My PP1 is white with a black roof, so I was looking have having all the matte painted gloss black, replacing the grilles to the cervini and having them painted gloss as well. I couldn't find anywhere showing if the chin could be removed without cutting though. Zander inadvertently came through lol.
Sounds like a pretty good idea Tim, should look awesome! Only other vid I’ve seen that’s similar in regards to chin spoilers....American Muscle did one but they were adding Roush parts. Zander is the man! :)
Good job Zander .. I put the RTR on my black 18 .. I agree, that "look" should be stock from the factory. Both splitters aren't over the top. Keep up the good work brother.
Alex I love it , it looks great very mean looking! DEF do the hood vents but I think id do the Roush hood vents IMO they look better than the MMD but that splitter is on point!!
Looks sharp I was contemplating on getting the mmd one 4 my '17 gt.looks like color and texture matches rest of the other panels... 👍👍 so that's next on my mod list...
@Zander13 great looking mod! I have the PP2 and love the factory splitter...but due to the PP2 having a lower ride height then the PP1 its not curb or driveway friendly...still love the look. Great video!
Very nice man looks great! go with the stock hood vents in all gloss black from a black car ..looks way better then the aftermarket options currently available
That spoiler is sick! Glad I do NOT have Magna-ride, leaves lowering an option! Although... ran over a dead deer last week, had only seconds to react, squared it up between the wheels and hung on! Luckily, only a slight 'bump' and all was well! On my '06, lowered, same thing, same road, etc., only I ended up with partially rotting deer guts stuck to the exhaust smellin' like a road kill BBQ! Took a couple weeks for THAT smell to go away! So, no lowering for now... but that spoiler is legit! =)
Your car looks great. So would you mind sharing why you didn't order the performance pack 2? Very interested in the pp2 tire in wet weather. Enjoy your videos...thanks for sharing. An old Vet.
The splitter looks good on your car but I was wondering how it might look if you were to paint it a dark gloss black, to match the grille, and then clearcoat it for protection. The non-functional lower grill elements might also look good if you could match their black to the grille. I would not remove or disable the hood vents if they are functional. They might look better if they were painted red to match the hood.
@@stevenp3176 I think an all flat black trim for the car would look good, as a contrast for the gloss red finish, it might highlight the red gloss more. Since he already has gloss black on the trim, I thought it would look good to match it and minimize the variation in finishes. Either way, it's a very nice looking car.
How has this chin spoiler held up for you? How well does it match the rest of the rocker panels and bumper trim/valance? I'm trying to decide between this one and the RTR. I just installed the RTR quarter splitters today and they are darker then the bumper trim and valance.
Propane Torpedo heater. $99. Get one. I prefer the stock PP1 splitter and I'll be keeping mine. That thing is too big IMO. But, if you like it, that's all that really matters.
Great how to vid my man! This stuff is gold to us gear heads lol if you are dragging your car this weekend you should do a how to vid on removing passenger and rear seats ;) I’ll be doing that come spring lol Awesome content though as per usual! If you haven’t already subscribed, Zander13 is a must follow! Cheers brother
Looking good brother, but isn't @stangmode running slower with this thing haha. Damn I want a new splitter either PP2 or RtR or the one you have. But the shipping/import/vat chsrges getting it here would kill me
Looks great, Zander. You said you're going to lower Project Carnage. By how much? The 2019 Mustangs already sit nicely on their suspension, IMHO. I wouldn't go much lower. Just my two cents.
Don’t change the hood vents. The 2013-2017s looked good with different vents specifically the Roush louvered vents on the hood. But the 2018s to me don’t look as good with those vents. The stock ones look the best on the 18s.
Hey Zander I looking to buy the side rails so I can jack up my 2018 mustang gt i just want to know which did u buy for your mustang gt so I can buy the same for mine thanks bro
Yea, I wrote them to tell them it doesn’t fit non pp cars...I would’ve kept the belly pan off but my hellion twins would’ve been semi exposed to road debris and weather
CAREFUL! The car is looking fast at a standstill and with that red you are going to get a speeding ticket PARKED! Take 2 points off your Driver's License!
🤣❤️❤️❤️
@@Zander13Productions .... for less than $50 bucks, you can get an infra-red portable heater, no shame in keeping your hands warm, or at least have a heat-station close by.
Looks great!
I made a custom chin spoiler at my shop using 6061 aluminum for my 13 and loved it, gonna do the same on my 19 when it gets here.
Dude I love your channel, keep the great content coming. I love seeing how much its grown so quickly!
INCREDIBLE!!!! Love it
I’m a copy cat
That blacked out grille is perfect.
I love it
I keep coming back because you make awesome videos. And anything to support a fellow veteran 🇺🇸🇺🇸🇺🇸
Thanks so much. More video coming soon as always. Thanks for your service
Wow! That looks badass! Love the way you compared them side by side and the measurements.
❤️
Really love the look of that spliter. More aggressive than stock but not over the top. It never stops....oops wrong channel :)
Good video and the lighting really wasn't bad at all. My old garage I had to pull the car out some to work too. It sucked during winter especially in upstate NY. I found that taping plastic to the bottom of the garage door and draping it down over the car with a slit in the center worked well to keep the draft out. Fired up a salamander to get it warm enough, so your lug "nutz" aren't in your stomach, worked great. No more frozen finger tips. Also almost to 10k. Keep it moving and stay positive!!!!
That does look really slick man! Very aggressive front
Thanks brother
Look's great I always worry about curbs and dips. That doesn't look much worse than stock. Another good how to.
Got a curb and busted my RTR. Just ordered this one and will be driving much more carefully. Damn lowered cars! She looks great man. Keep up the good work.
excellent, I hope you like it. I love it still
Just installed today. Took it out of the box and thought it would be way too big. Gotta say I'm glad I was wrong. It looks amazing!
Fitment looks spot on. Great addition dude, looks badass.
it is a perfect fit. very impressed
Great content as always,spliter looks sharp Zander good choice !
Thank you
Another solid video. Nice detail and like how you compared to other splitters on the market. Car is coming together. Well done.
Thanks. I tried to keep it detailed
Dude this thing looks sick, I'm loving it for sure
Real nice bro. She’s coming together very well
Hey Zander, chin spoiler looks good bro!!! I like this chin spoiler better than any other I’ve seen on a 2018-19 Mustang.
I love it
You just made my decision a little tougher. The splitter looks good on Carnage! Great video; good length, good subject and informative.
Thanks for sharing. PEACE
you are very welcome
A little magnetic tray would come in handy for mods like this. It looks great, the race red makes it more noticeable 👍
Looks awesome! Wish I had a new mustang like that
That's my car in your video !! :D I would have bought this one too if it was available, this one looks a little bit more aggressive and cheaper than the RTR one. Looks great, i'm really jealous lol
lol thanks
Looking good! Good to see carnage coming together.
I had a lot of MMd parts on my S197, they are good quality and fit well. Looks good man !!
Fitment was just like oem. Awesome
A few things:
I'm glad that TH-cam is coming together for you. You have a good channel and good content. Love the install videos. I do make sure to watch the commercials for you. (As much as the Netflix Sabrina ads grate on me lol)
Thank you! You are the first video I have been able to find with a Chin removal. I want have have my chin and skirts painted gloss. I didn't know if it was easy or even possible to separate the Matte pieces from the painted though. Now I do.
Lastly and off topic, do you think the matte diffuser on the rear will separate as well?
thanks and you are very welcome. I like to bring the hard to find info to this channel
rear diffuser is a one piece
I was going to suggest he paint it either red or black ? Depends what grill he’s planning on getting...but then again you could paint the grills too hmmmm lol
@@tlcgtp My PP1 is white with a black roof, so I was looking have having all the matte painted gloss black, replacing the grilles to the cervini and having them painted gloss as well. I couldn't find anywhere showing if the chin could be removed without cutting though. Zander inadvertently came through lol.
Sounds like a pretty good idea Tim, should look awesome! Only other vid I’ve seen that’s similar in regards to chin spoilers....American Muscle did one but they were adding Roush parts. Zander is the man! :)
Good job Zander .. I put the RTR on my black 18 .. I agree, that "look" should be stock from the factory. Both splitters aren't over the top. Keep up the good work brother.
❤️
Was between this and the RTR splitter. This is definitely better looking. I’ll be going with this one.
Alex I love it , it looks great very mean looking! DEF do the hood vents but I think id do the Roush hood vents IMO they look better than the MMD but that splitter is on point!!
Nice addition to project carnage Alex. Going to be a long winter with temps like this already.
Yes. I think it’s going to be a cold one this year finally
Wow, looks awesome, congrats brother!
thanks, I love it
Nice man...good to hear on youtube to just wait till it grows and you can buy cars and stuff. Only way to go is up
that would be awesome. I would love to have a project car omg this channel one day
Love it! Thanks for another great video! 🤘🏼
Looks sharp I was contemplating on getting the mmd one 4 my '17 gt.looks like color and texture matches rest of the other panels... 👍👍 so that's next on my mod list...
it matches very well and is a great product
That looks sick
I love it
Looks awesome, I just ordered one now for my 2019🤘🏻
excellent!!!
Zander13 I have the hellion street sleeper on my 19 auto...time for you to join the turbski club brotha!
@Zander13 great looking mod! I have the PP2 and love the factory splitter...but due to the PP2 having a lower ride height then the PP1 its not curb or driveway friendly...still love the look. Great video!
😎❤️
It makes a BIG difference, hey Zander why don't you get the 4inch Cowl they paint it to match your car so when it comes it just bolts right on!👍👍👍
Get a 12 volt 1/4” impact driver. They are killer for them types of jobs. Looks great 👍🏻
Good video Mr Zander , looks awesome 👍
Thanks brother
Man that looks sick brother
Looks awesome on the Mustang. I plan to do my 18 also.
I was looking at that. Good video
Very nice man looks great! go with the stock hood vents in all gloss black from a black car ..looks way better then the aftermarket options currently available
I have some on the way so we shall see
Great volg Bro. The Splitter Lookz great Bro 👍
Looks great. But can you tell part number of your original splitter? Is pp1?
I have seen the Roush hood vents color matched and they look great! In your case, the mate black finish is the better option.
That spoiler is sick! Glad I do NOT have Magna-ride, leaves lowering an option! Although... ran over a dead deer last week, had only seconds to react, squared it up between the wheels and hung on! Luckily, only a slight 'bump' and all was well! On my '06, lowered, same thing, same road, etc., only I ended up with partially rotting deer guts stuck to the exhaust smellin' like a road kill BBQ! Took a couple weeks for THAT smell to go away! So, no lowering for now... but that spoiler is legit! =)
Thanks. Definitely watch out for deer. I’m paranoid of it too
Looks great!!!! Definitely meaner looking!!
Your car looks great. So would you mind sharing why you didn't order the performance pack 2? Very interested in the pp2 tire in wet weather. Enjoy your videos...thanks for sharing. An old Vet.
I wanted the 10 speed auto so I had to go with the PP1. No regrets though. Thanks for your service
LOOKING GOOD. ENJOYED VIDEO. HAPPY THANKSGIVING. GOD BLESS
Thanks. We have been uploading a lot this week
Are the headlights and parking lights tinted? If so did you use a kit to tint?
The splitter looks good on your car but I was wondering how it might look if you were to paint it a dark gloss black, to match the grille, and then clearcoat it for protection. The non-functional lower grill elements might also look good if you could match their black to the grille.
I would not remove or disable the hood vents if they are functional. They might look better if they were painted red to match the hood.
painted might look neat
My opinion would be the opposite. I think it would all look good including the grill to be flat black texture matching the splitter already.
@@stevenp3176 I think an all flat black trim for the car would look good, as a contrast for the gloss red finish, it might highlight the red gloss more. Since he already has gloss black on the trim, I thought it would look good to match it and minimize the variation in finishes. Either way, it's a very nice looking car.
Is that the original red paint? It looks gorgeous
Yes
Splitter looks great! It’s between this one, the Roush, or the PP2 for mine.
Roush looks good, I just wish it didn't say roush on it.
Great new ad on not to expensive looks great
Looks good what you think about the limited production series 1 rtr that ford is doing for the 2019.
Zander, car looks great! You make installs easy. About how long did it take for the install? Thanks again. Great video!
thanks. if I was not filming. about 30 min
Looks sharp.
The ones were the plastic pins r won't line up to put the 7mm bolts
not sure why
Do some black hood vents. Did mine on my 2019 GT in ingot silver
Looks fantastic!
I like it! I just wish it was easier to install. On an unrelated note, how are the summer tires going with the low temps? 🙂
Summer tires are starting to become bricks lol
@@Zander13Productions Yeah same here. Gotta take it nice and easy. If they gave us the option I would have taken the Michelin Pilot A/S tires.
Another awesome video!!!!
How has this chin spoiler held up for you? How well does it match the rest of the rocker panels and bumper trim/valance? I'm trying to decide between this one and the RTR. I just installed the RTR quarter splitters today and they are darker then the bumper trim and valance.
A little darker but not bad
Hey there I put the MMD spoiler I had a question on both sides u can't put the 3 screws on each side?
I was able to. It was a tight fit
S E X Y carnage ain't got no alibi
You s550 guys have the coolest exterior mods
companies are starting to make some very cool stuff. I wish someone would make a heated flat bottom steering wheel though lol
@@Zander13Productions maybe it should be you...
Wow that looks mean! Probably good for 6-7 hp. Congrats!
😜❤️
That is why I have a heater in my garage. 😀
Get the Air design hood vents they are sick!
they are very cool looking
I found out the belly pan different on performance pack n non performance pack
Yes they are different
stangbangin' coyote Is the PP belly pan requires to install this chin spoiler?
O Cruz yes
Propane Torpedo heater. $99. Get one. I prefer the stock PP1 splitter and I'll be keeping mine. That thing is too big IMO. But, if you like it, that's all that really matters.
Love it. It looks great
thanks!!!!!
Keep the hood vents!
Great how to vid my man! This stuff is gold to us gear heads lol if you are dragging your car this weekend you should do a how to vid on removing passenger and rear seats ;) I’ll be doing that come spring lol
Awesome content though as per usual! If you haven’t already subscribed, Zander13 is a must follow! Cheers brother
Thanks. I love the how to videos. I am racing this weekend but am not pulling my interior. I can still do a video on how to do it. That’s a great idea
Sounds good sir. Look forward to seeing the footage from the first time Carnage hits the track :)
Looking good brother, but isn't @stangmode running slower with this thing haha.
Damn I want a new splitter either PP2 or RtR or the one you have. But the shipping/import/vat chsrges getting it here would kill me
Yes, he has the same one
Looks good man
The push pins
lol
Is your garage not deep enough to do the work with the door closed?
it is not. very shallow
Looks great, Zander. You said you're going to lower Project Carnage. By how much? The 2019 Mustangs already sit nicely on their suspension, IMHO. I wouldn't go much lower. Just my two cents.
maybe 1 inch. I have mag ride so I am limited
@@Zander13Productions That sounds about right. Also, mag ride is great to have.
Looks great
Looks Awesome!!!
Good job. Looks great! But that jack-stand scenario looked scary unsafe...
Don’t change the hood vents. The 2013-2017s looked good with different vents specifically the Roush louvered vents on the hood. But the 2018s to me don’t look as good with those vents. The stock ones look the best on the 18s.
Yeah looks good to me! I got the RTR one for my 2018.
The RTR is sexy
Very aggressive looking .nice install video.👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
🙏🙏❤️❤️
Damn that looks Awesome! I think I might get the Same 1 lol.😁
Hey Zander I looking to buy the side rails so I can jack up my 2018 mustang gt i just want to know which did u buy for your mustang gt so I can buy the same for mine thanks bro
BMR . If you go to bmrsuspension.com and use code zander7 at checkout it will save a decent bit of money for you. BMR is the best.
Looks sick 👌😉
Hey bro! Would that splitter fit my 19 base GT ?
THat looks BADASS!!! it should have some interesting DOwnward Force Aerodynamics!
I imagine it would be similar to the PP2 splitter given its similar shape
Nice camaro want one like it but in blue like the old ones
What camaro?
@@Zander13Productions is that not a camaro?
@@luisprieto1262 mustang
@@Zander13Productions oh well cool car
Much better look!
Looks way better money well spent. How's carnage handle and feeling after the accident?
It feels good as new
Looks awesome
Looks good 👍
I went to install my lip but my factory splash guard would not fit with this lip. Did you have this issue? I’m having to return it tomorrow 😡
Mine fit fine. Did you call them about it.
I called them but they said it should fit. I messed around with it for two hours trying to figure out ways to make it work, no go though🤷🏻♂️
Ahhh I think I figured it out, you need a pp belly pan for this splitter to fit!
Mike T mine is a pp. I know the website says it fits both
Yea, I wrote them to tell them it doesn’t fit non pp cars...I would’ve kept the belly pan off but my hellion twins would’ve been semi exposed to road debris and weather
The splitter looks awesome. Please don't touch the hood vents!
Much better!!!
Love car parts.
be careful with curbs. I mis-judged one and barely touched it and it snapped like a toothpick
Hey zander, are you selling your stock splitter? If you are i'll love to buy it! Let me know.