Great review, totally agree with your app improvements and increased battery capacity requests. We have cut slots in the case we're drone sits for the props to go. Had my shark X about 7 months 60 flights over 3hrs flying and works great.
I dont look at wind with my cutas these days mate 100% confidence as I've been flying for a ling time. Shark X seems to hold realy well in wind & 1k cheaper. Depends on your budget bro.
Hey mate have you had any issues with the shark x drone dropping signal from the remote control?? I only purchased it about a month ago from tony. Mine was working fine on my first trip away flying bait 600m plus now it constantly drops signal at about 250 meters. Any ideas ?
Hi mate had zero issues. Max ive pushed it to is 450m though. Are Antenna all screwed in tight and pointing out. Definatly give Tony a buzz shouldn't be doing that.
@dronefishingdamo6453 remember they all have one job to carry weight and float in failure, I build heavy lift uavs every now then modify sd3 cause it's so modular compare to newer drones I literally just finished putting motors alittle bigger then your cuta copter on with 6s battery, my God it flies 😆
Hi Damo , just got my shark x . I noticed the battery for the drone says 4400mA on it but in the manual it says 6000mA . That would decrease flight time ? Should I contact them?
Thanks for your response mate, I contacted them and they told me its a 6000mA with a 4400mA sticker . I dont think we got more than 10 minutes out of the battery. Im going to chase it up
I just don’t want another episode like swel pro. They got the money. Had really poor support and it was like drifting in a row boat with ours. To boot the controller and craft don’t stay connected and it wasn’t really waterproof. I had a total shit show with them
I had a swell pro was not totally happy post purchase. I found owning one of those units had me searching for firmware updates and other re cal tutorials very often. I’m not an IT guy and having to perform such downloads and updates are worrisome for me. Is a Shark X unit similar in its need for constant updates and computer linking to the manufacturer. I’m looking to give the company money and just fly the drone. Any l thing you can offer is appreciated
Great review, totally agree with your app improvements and increased battery capacity requests. We have cut slots in the case we're drone sits for the props to go. Had my shark X about 7 months 60 flights over 3hrs flying and works great.
thanks Damo!
Can you zoom in on your target when doing the missions to see buildings etc?
this is a fishing drone no buildings over water... I'm so confused
How does it compare with your cuta for example in balance and higher winds Damo ?
I dont look at wind with my cutas these days mate 100% confidence as I've been flying for a ling time. Shark X seems to hold realy well in wind & 1k cheaper. Depends on your budget bro.
Hey mate have you had any issues with the shark x drone dropping signal from the remote control?? I only purchased it about a month ago from tony. Mine was working fine on my first trip away flying bait 600m plus now it constantly drops signal at about 250 meters. Any ideas ?
Hi mate had zero issues. Max ive pushed it to is 450m though. Are Antenna all screwed in tight and pointing out. Definatly give Tony a buzz shouldn't be doing that.
Would you be able to compare it with SP splashdrone 4?
I haven't flown an SD4 only the FD1.
If we lived in same state would love to send you a sp3+ that can do the same weight as that 😅
Sd3's not a bad Drone Little bit dated now. I'm looking forward to having a look at the new fisherman max
@dronefishingdamo6453 remember they all have one job to carry weight and float in failure, I build heavy lift uavs every now then modify sd3 cause it's so modular compare to newer drones I literally just finished putting motors alittle bigger then your cuta copter on with 6s battery, my God it flies 😆
Hi Damo , just got my shark x . I noticed the battery for the drone says 4400mA on it but in the manual it says 6000mA . That would decrease flight time ? Should I contact them?
4400mha sounds low/incorrect would definitely ask the question.
Thanks for your response mate, I contacted them and they told me its a 6000mA with a 4400mA sticker . I dont think we got more than 10 minutes out of the battery. Im going to chase it up
Are you able to disarm the lights?
Not that I am aware of
What other names in drones do you like for fishing
Cuta Copter are by far the best on the market hands down
I’ll look into that one. Thank you again.
I just don’t want another episode like swel pro. They got the money. Had really poor support and it was like drifting in a row boat with ours. To boot the controller and craft don’t stay connected and it wasn’t really waterproof. I had a total shit show with them
How long does the battery take to charge?
From storage about 1hr
I had a swell pro was not totally happy post purchase. I found owning one of those units had me searching for firmware updates and other re cal tutorials very often. I’m not an IT guy and having to perform such downloads and updates are worrisome for me. Is a Shark X unit similar in its need for constant updates and computer linking to the manufacturer. I’m looking to give the company money and just fly the drone. Any l thing you can offer is appreciated
All updates are notified/done via the app. Absolute piece of piss.
Thank you for that
Thank you for that
Better get a aviation drone licence before u get this before u even buy it
good review but using tiny cell phone aspect ratio on youtube kind of sucks. Totally ruined it for me. This is youtube not Tik Tok.