Cat 740 AC Repair

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ต.ค. 2024

ความคิดเห็น • 49

  • @aaronmoore5552
    @aaronmoore5552 3 ปีที่แล้ว +3

    I too think you should do more heavy equipment. Equipment videos are so hard to find and I find them interesting! DO MORE!!! :D

  • @HMINawar
    @HMINawar 3 ปีที่แล้ว +2

    Good work , more videos about electrical repairs of Caterpillar

  • @lucianocoelho1872
    @lucianocoelho1872 7 หลายเดือนก่อน

    A hug from Brazil!

  • @lucianocoelho1872
    @lucianocoelho1872 7 หลายเดือนก่อน

    Congratulations my friend, thanks for sharing!

  • @connan8838
    @connan8838 ปีที่แล้ว +1

    thank you very much for this video sir.😊

  • @salomonyeboua7845
    @salomonyeboua7845 ปีที่แล้ว +1

    I like your videos

  • @angelovalentin4050
    @angelovalentin4050 ปีที่แล้ว

    I see thank you and I think my work last week 988 wheel loader i changed all hose all filter flashing condenser and Evaporator new compressor then I put gas about 220psi high side but low side is only 20psi while running the engine but cooling not good after that I put more refrigerant 270psi high side 30psi low side become cold while idling the engine if i rising the rpm 310psi high side low side same 30psi this is normal?

  • @bonniedobkin6948
    @bonniedobkin6948 4 ปีที่แล้ว +1

    Nice 👍🏻! Great VIDJA

    • @bonniedobkin6948
      @bonniedobkin6948 4 ปีที่แล้ว +1

      Recognized the Lamborghini in the background right off before you said anything : Ha Ha

  • @thabangwonderriba3911
    @thabangwonderriba3911 7 หลายเดือนก่อน

    Help!!!!
    1. What are the reasons why the air conditioner does not refrigerate and the troubleshooting steps
    2. What are the reasons why the generator does not generate electricity, and the inspection steps

    • @RasmussenEquipment
      @RasmussenEquipment  7 หลายเดือนก่อน

      I bet you have either a bad ground or broken wired in the harness

  • @mobinkhankhan8785
    @mobinkhankhan8785 ปีที่แล้ว +1

    Good job.

  • @mafiagt6777
    @mafiagt6777 3 ปีที่แล้ว +2

    Been looking around and can’t find any info as to where the blower resister is located on the 320 excavator any one knows?

    • @RasmussenEquipment
      @RasmussenEquipment  3 ปีที่แล้ว +1

      I’d have to look it up later but they are usually in the blower box so that the air passing through keeps them from overheating

    • @mafiagt6777
      @mafiagt6777 3 ปีที่แล้ว

      @@RasmussenEquipment thanks! I will keep looking

    • @RasmussenEquipment
      @RasmussenEquipment  3 ปีที่แล้ว

      What is the serial number prefix

  • @angelovalentin4050
    @angelovalentin4050 ปีที่แล้ว

    The pressure of high side it was normal even 280psi? Thank you

  • @Formula1-Dave
    @Formula1-Dave 2 ปีที่แล้ว

    Thank you, this is awesome

  • @hollywoodaf4566
    @hollywoodaf4566 2 ปีที่แล้ว

    I have 2014 CAT ct660. I’m having a hard time to find low pressure valve. Can you help?

    • @RasmussenEquipment
      @RasmussenEquipment  2 ปีที่แล้ว +1

      I would have to look at it.
      I has to be somewhere between the evaporator core and the compressor. The low side or suction line is the larger hose.

  • @lucianocoelho1872
    @lucianocoelho1872 7 หลายเดือนก่อน

    how much pressure works

    • @RasmussenEquipment
      @RasmussenEquipment  7 หลายเดือนก่อน +1

      With the A/C running with engine at idle I line to have around 25 to 30 psi on the low side.

  • @saleemdara8131
    @saleemdara8131 3 หลายเดือนก่อน

    Sir please use Bluetooth mic for your recording because your voice cannot be heared due to machine sound..but if you use mic then i hope ur Voice is more clear

    • @RasmussenEquipment
      @RasmussenEquipment  3 หลายเดือนก่อน

      I have thought of getting one, this video however was shot with my iPhone which is very rare of me to do. I usually use GoPro cameras and they have much better mics.

  • @charithpriyamantha9144
    @charithpriyamantha9144 3 ปีที่แล้ว

    Thanks

  • @sicsempertyrannis8830
    @sicsempertyrannis8830 2 ปีที่แล้ว +1

    I find slowly metering the refer in by just cracking the valve is much safer especially if you a charging with refer tank upside down and in liquid state keeps the pump from flooding and also over charge by accident.
    Just my 2 cents. FJB!!!!

    • @mobileair6416
      @mobileair6416 2 ปีที่แล้ว

      That's why you use a scale.

  • @angelovalentin4050
    @angelovalentin4050 ปีที่แล้ว

    I’m newly for heavy equipment ac technician

    • @RasmussenEquipment
      @RasmussenEquipment  ปีที่แล้ว

      The AC systems are pretty simple once you understand how they work.

  • @whiskeytangofoxtrot5939
    @whiskeytangofoxtrot5939 5 หลายเดือนก่อน +1

    2.1kg if anyone came here to look is what most cat cabs are

  • @johngammon6875
    @johngammon6875 3 ปีที่แล้ว +3

    Love the Trump flag in the shop👍🏻

  • @mobileair6416
    @mobileair6416 2 ปีที่แล้ว +1

    Way too high on the high side bro

    • @RasmussenEquipment
      @RasmussenEquipment  2 ปีที่แล้ว

      Well it sure runs cold.

    • @mobileair6416
      @mobileair6416 2 หลายเดือนก่อน

      @@RasmussenEquipment Use a scale.

    • @RasmussenEquipment
      @RasmussenEquipment  2 หลายเดือนก่อน

      I actually use an A/C machine to evacuate and refill. But this is how to check it with only gauges. Most people cannot afford a $10k machine.

  • @jamesgarland3630
    @jamesgarland3630 6 หลายเดือนก่อน +1

    Great video and love your trump flag! Trump 2024

  • @shoaibturk3954
    @shoaibturk3954 2 ปีที่แล้ว

    You are good but don't understand use easy English that every one understand and don't talk fast

  • @nafissatoudiallo7880
    @nafissatoudiallo7880 ปีที่แล้ว +1

    Good job