Thank you. Having bought this mount, the sheer amount of paperwork inside was a bit daunting for an amateur like me and I was about to pay to get this installed. Having watched your video a couple of times and taking my time, it's now installed and looking amazing
Hi Dan... question - I've got the s95c 77" and the stud placement in my drywall means the wall mounts won't hit any studs. Do you think it's possible to mount this TV from the 2 top holes of the vesa mount (closer to the center of the TV) rather than the 2 holes near the edges of the TV? If I can use those center holes, I'll be able to align with the studs. Thanks!
Hi, If i buy any Tv that's officially on Samsung's website supported by this mount, do they have those metallic brackets at identical distance from each other? So if I install it on one 55" it should also work for 65" tv?
Thanks so much, Dan. That was so useful mate. With the S95C being 18mm away from the wall, do you know how far away from the wall the LG G2 in your home was in comparison? Many thanks.
Hi Dan, really helpful video. I've found that the bottom right TV corner is further from the wall than the other corners. Do you think the TV-side brackets need adjusting? I thought it could also be the TV-side brackets are bent out of shape because I got refurbished ones. thanks
@@Mano_on_Point any tips for that? I've also bought WMN-B50EB for S90C 77". I've read some comments that this wall mount is not compatible with S90C 77" :/
Hey folks. I bought this tv and the mount recently and my handyman installed but I’m unsure if he did correctly to be honest as the tv doesn’t sit flat and the fixings appear slightly over the tv as it’s tilted downwards. I believe it’s because the one connect cable is going back through the wall and there’s some length pushing the out at top. So my query is in relation to the video? I see you say ur connecting the cable at end, but I don’t see where the cable goes? Is it through the wall? Is there a way to run cable behind the tv without a wall entry point? To keep it as flat as supposed to be? Hope you or someone her can assist. Thanks.
Hey there mate just a quick question with the slim mount do you think there is enough room behind tv for a brushed plate to allow cables to go through wall? Instead of just having a hole in wall for the cable to go through?
Hello. Is it possible to not snapped the magnet back in place? I love so that the tv to become more slanted. Will the effect the safety? Please repond tysm.
Hello Dan, I have just received the OLED S95C (2023) and I'm struggling to find the WMN-B50EB (the newest version) in Europe. Could you confirm that the WMN-A50EB (that I have found on a webstore) is exactly the same and fully compatible? As far as I understand, it's just a matter of the manual. i.e., the model OLED S95C (2023) is not mentioned in the WMN-A50EB manual, but thanks to your videos, I could easily install the TV in the proper way! 😃"
Hello. Did you end up using WMN-A50EB mount? I ran into problems. 55 inch SN95C with same mount. When I hang the tv, it drops down and showing part of the mount above tv. Any suggestions?
Hi there, a real stupid question but the TV is slim because of the slim one connect box being separate. You are obviously attaching to a built unit but if I just want to attach this to my wall, do you have to chase the cable from the TV to the connect box into the wall if you want it hidden or is there another way of doing this? I would have thought a wireless option is available but happy to make do with the one cable if I have to.
What size TV was it? I want to buy 55inch and saw a comment that the wall mounted brackets are visible / stick out from the top. Also not sure which model of slim fit mount to order for this TV, there are mix opinions out here.
@@sachaburki8535No that's not true, it also depends on how close you are to the TV (as well as the size). I sit 2 metres from my 4k 55 inch TV and can tell a MASSIVE difference from when I had a non-4k one.
hi, do you think it will be the same as the s95D tv. and I have another question, can we use the bottom middle holes with this type of support. Thank you
If I want to route the One Connect cable through the wall, is there enough space for the cable to go anywhere behind the TV or does the TV sit flush against the wall and there isn't space?
Hi mate thank you for your videos, advice and all the hard work. I have a wall but it has sockets behind where the tv would sit… my question is with this mount would I be able to pull it out further to have a slightly bigger gap from the wall to the back of the tv? If not which other mount would you recommend ?
that's where these mounts suck, with normal brackets you can get the screws across a wide range. In theory you might be able to get away with 4 plugs to drywall, over time I reckon the weight of the TV would just make it fall off.
Dan, any confirmation on length of the M8 screws needed for standard VESA mount? Ive read 6mm, 8mm, and 10mm but cant get a clear answer. Like is there room for 6mm without washers or is it 8mm with washers etc??
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 ธันวาคม 2567](http://i.ytimg.com/vi/dNTiBBthKgQ/mqdefault.jpg)
Thank you. Having bought this mount, the sheer amount of paperwork inside was a bit daunting for an amateur like me and I was about to pay to get this installed. Having watched your video a couple of times and taking my time, it's now installed and looking amazing
Brilliant, I'm glad it helped. Now sit back and enjoy 😉
Thanks, Dan. Just bought a tv and this mount to hang it. Always useful to see it done beforehand.
Awesome video, thank you so much. This has convinced me to pull the plug on the S95C - I LOVE how close it sits to the wall.
Hello! Just mounted my s95c 65 inch. Don’t you have sound problems when it’s 7,5mm away from the wall? My sound is wheezing/cracking time to time
Whats your suggestion when the studs on drywall are wider than what these brackets allow for?
Hi Dan... question - I've got the s95c 77" and the stud placement in my drywall means the wall mounts won't hit any studs. Do you think it's possible to mount this TV from the 2 top holes of the vesa mount (closer to the center of the TV) rather than the 2 holes near the edges of the TV? If I can use those center holes, I'll be able to align with the studs. Thanks!
Hi, If i buy any Tv that's officially on Samsung's website supported by this mount, do they have those metallic brackets at identical distance from each other? So if I install it on one 55" it should also work for 65" tv?
How does it sound? It has rear firing speakers, if you pair it with its equivalent soundbar that utilises the rear tv speakers wont it sound weird?
Its in the 65 inch version also 3,5 cm from the top to the hole?
Thanks so much, Dan. That was so useful mate. With the S95C being 18mm away from the wall, do you know how far away from the wall the LG G2 in your home was in comparison? Many thanks.
Sorry was that the LG G3 comparison on wall mounted depth at the end? Keen to know that measurement when actually installed
Hi Dan, really helpful video. I've found that the bottom right TV corner is further from the wall than the other corners. Do you think the TV-side brackets need adjusting? I thought it could also be the TV-side brackets are bent out of shape because I got refurbished ones. thanks
I bought this wall mount for the s9077c but no installer wanted to mess with it because it was complicated but it doesn’t look too bad
I think the initial paperwork makes it look more complicated than it really is, after I did one install the following ones were so easy
@@TellyDan good to know thank you Dan
@@Mano_on_Point any tips for that? I've also bought WMN-B50EB for S90C 77". I've read some comments that this wall mount is not compatible with S90C 77" :/
Hey folks. I bought this tv and the mount recently and my handyman installed but I’m unsure if he did correctly to be honest as the tv doesn’t sit flat and the fixings appear slightly over the tv as it’s tilted downwards. I believe it’s because the one connect cable is going back through the wall and there’s some length pushing the out at top.
So my query is in relation to the video? I see you say ur connecting the cable at end, but I don’t see where the cable goes?
Is it through the wall?
Is there a way to run cable behind the tv without a wall entry point? To keep it as flat as supposed to be?
Hope you or someone her can assist. Thanks.
Hey there mate just a quick question with the slim mount do you think there is enough room behind tv for a brushed plate to allow cables to go through wall? Instead of just having a hole in wall for the cable to go through?
bonjour j'envisage de fixer mon 77s95c au mur sur du placo 13mn c'est bien le support wmn-b50eb ? merci 🙏
Hello, did you use the C1 bolt (the smallest) or the C2 bolt (the medium-sized one)? Thank you
Where did you put the connect box?
Hey what is the other mount in the end ?? This mount wont fit cause my electric plugs are behind tv :((
Standard fixed bracket would do fine
Hello, how would you do it With a Samsung QN90C, which I believe it is not compatible with One Connect ? How would you Connect that TV ?
Hello. Is it possible to not snapped the magnet back in place? I love so that the tv to become more slanted. Will the effect the safety? Please repond tysm.
Hello Dan, I have just received the OLED S95C (2023) and I'm struggling to find the WMN-B50EB (the newest version) in Europe. Could you confirm that the WMN-A50EB (that I have found on a webstore) is exactly the same and fully compatible? As far as I understand, it's just a matter of the manual. i.e., the model OLED S95C (2023) is not mentioned in the WMN-A50EB manual, but thanks to your videos, I could easily install the TV in the proper way! 😃"
Hi Antonio, yeah the brackets just the same, the paperwork maybe different but that's all
Hello. Did you end up using WMN-A50EB mount? I ran into problems. 55 inch SN95C with same mount. When I hang the tv, it drops down and showing part of the mount above tv. Any suggestions?
Will it work with the one connect box mounted in the back of the TV?
Hi there, a real stupid question but the TV is slim because of the slim one connect box being separate. You are obviously attaching to a built unit but if I just want to attach this to my wall, do you have to chase the cable from the TV to the connect box into the wall if you want it hidden or is there another way of doing this? I would have thought a wireless option is available but happy to make do with the one cable if I have to.
Obviously, there is a power delivered to TV with the same cable so no wireless option here
What size TV was it? I want to buy 55inch and saw a comment that the wall mounted brackets are visible / stick out from the top. Also not sure which model of slim fit mount to order for this TV, there are mix opinions out here.
This is the 55 inch s95c most of the Samsung range are compatible with this bracket I've even mounted 50 inch qn90s on this bracket
Don't, its to small for 4K in 55 inch !
55 Inch is good for HD
65 inch 4K
77 or more for 4-8 K
@@sachaburki8535No that's not true, it also depends on how close you are to the TV (as well as the size). I sit 2 metres from my 4k 55 inch TV and can tell a MASSIVE difference from when I had a non-4k one.
Do you know if there are any disadvantages using the "Cheaper alternative Slim Fit Wall Mount " for s95c 77 inch? Thank you in advance.
hi, do you think it will be the same as the s95D tv. and I have another question, can we use the bottom middle holes with this type of support. Thank you
The top middle are usable but the bottom middle would only be usable with a vesa mount bracket, I imagine it would be the same as the s95d as well
@@TellyDan Thank you
If I want to route the One Connect cable through the wall, is there enough space for the cable to go anywhere behind the TV or does the TV sit flush against the wall and there isn't space?
It’s 7.5 mm between tv and the wall. That’s enough for the One Connect cable.
Hi mate thank you for your videos, advice and all the hard work. I have a wall but it has sockets behind where the tv would sit… my question is with this mount would I be able to pull it out further to have a slightly bigger gap from the wall to the back of the tv? If not which other mount would you recommend ?
I have same problem 😢 what was your solution?
Hello, I have the same question. Have you been able to install it?
Does it effect the sound quality when mounted ?
2 screws per bracket is plenty for those mounts and tv weight.
If there are no studs to attach the mount to, would going right into the drywall ever be an option ?
that's where these mounts suck, with normal brackets you can get the screws across a wide range. In theory you might be able to get away with 4 plugs to drywall, over time I reckon the weight of the TV would just make it fall off.
If it’s installed by wall mount, then where do you put the one connect box?
Va fuera la llevas al mueble mediante un cable
Would you be confident vesa mounting this with the recommended M6 screws which I believe are only 6-7mm because of how thin the TV is?
Yeah I think they're m8 and there's a framework inside to give it strength
Will this work for the 77” s95c?
Kabil 10:13😯👍
Dan, any confirmation on length of the M8 screws needed for standard VESA mount? Ive read 6mm, 8mm, and 10mm but cant get a clear answer. Like is there room for 6mm without washers or is it 8mm with washers etc??
Y no es capaz Samsung de poner una plantilla para poner en pared
Я сегодня делал данный крепеж для Frame 50 к бетону на 3 болта и думал надежно ли это 😂
cm? Whats happened.... where are the inches... hahahaha.... finally....
Sorry, multiply the measurements by 2.54 if that helps?
😮😮😯😯😲😲😲😲😲😃😃👌👌 saludos desde 🇪🇸 y de un 🇲🇽
Thank you and greetings from England 🏴