Hi, Saw you are using same setup as me, Can you please tell me if you can trigger record from the Camera when using Pro-Res-RAW, I keep getting "This operation is disabled while outputting raw data" and yes I have setup everything according to Atomos recommendation
@@patricknejad6779 it’s not intuitive but you need to enable timecode and enable it on HDMI. You’ll then be able to trigger record on the Atomos from your S5.
@@WilliamTurnerViolins is yours working with Prores-RAW? I keep getting "This operation is disabled while outputting raw data" on latest firmware on both
Interesting....you instruct us to "turn power save / sleep mode off"....but when an HDMI and or the Atomos is plugged into my S1H...it disables the Sleep mode what am I missing ?
It's not a problem. I am editing only on PC's and recording everything in prores. And also don't use mac. Premiere pro has prores on windows too, davinci does not, but if you are using davinci that is also not a problem.
If you don't use a Mac, you should check Apple Prores RAW support on Adobe Premiere, since you won't be able to use FCP X... Alternatively you can record Prores 422 HQ or Prores 4444 with V-Log enabled, this will work on Premiere, DaVinci resolve and Avid on Windows. Avid DNx would also work fine, on both Mac and Windows platforms, but Prores 422 HQ is usually the industry delivery format, so might be better to work in the Prores ecosystem even if not shooting RAW
Do you have a link to where I can buy this specific HDMI cable for the Panasonic S5 to Atomos Ninja? I've purchased a few HDMI cables that had specs that should have been able to handle the RAW data coming out of the S5, but they all have inconsistent connections and are therefore unusable. Thanks!
@@osaket this official Atomos cable did the trick for RAW video - Atomos AtomFLEX PRO Micro HDMI to Full HDMI Coiled Cable (12 to 24"). The only issue is that it's not great for a gimbal set up as the cable is a bit heavy. But it's been perfect for filming raw video with the Atomos Ninja V.
Hi, do you know in the case if I want to use the ninja v just for monitoring (so not shooting on RAW or ProRes .. just I want to record internally with my camera sd card) how can I do playback?
Hello Vanessa, Thank you for your comment. Please note that you can playback the video from the camera by going to the playback menu within your camera, the recording will be shown on Ninja V. For further queries please reach out to our support team using the link below: support.atomos.com/hc/en-us/requests/new Cheers! Mehdi Atomos
Hi Dat Luong, Thanks for reaching out. That's correct. You'll need to download the firmware from Nikon. This can be found on the Nikon website. Kind regards, Toby - Atomos
Hello JKruze, Thank you for choosing our Atomos device! We're sorry to hear that you're experiencing issues with recording to DNxHD with S5. Have you activated the DNxHD codec on your device? If not, you may need to activate it in order to record in DNxHD format. Please refer to your device manual for instructions on how to activate the DNxHD codec. If you have already activated the DNxHD codec and are still experiencing issues, we recommend that you contact our tech team. They are ready to help you out and provide any necessary assistance to resolve the issue. You can find our support page at atomos.zendesk.com/hc/en-us/requests/new. Please don't hesitate to contact us if you have any further questions or concerns. ATOMOS.
Can you please tell me if you can trigger record from the Camera "Panasonic S5" when using Pro-Res-RAW, I keep getting "This operation is disabled while outputting raw data" and yes I have setup everything according to Atomos recommendation
its in my below messeage which says @Atomos, Please update your video to include HDMI Rec output\HDMI Recording Control for RAW option. its not included in your video
Hi , the ninja v shows no input when plugged to S5 when the camera is on "manual video mode" but when i turn the camera dial to any other option such as S,A,M, the ninja shows whats on the camera..when i press record, the file comes out as HD/59.94 rec 709, codec apple prores 422 hq, but not 4k or 5.9 prores raw. Any solution to this issue?
Question, when using v-log and 10 bit the external recording has a very weird colour banding issue with mixed lighting (no issue when recording internally). Any idea what it could be?
@@patrickmccall6212 It was not. It's a magenta/cyan banding on warmer tones. Atomos told me the unit is faulty and I'm sending it in for repair soon. Let's see
Hi guys! I got a problem I can't solve so please advise me if you can..On my S5 as soonest I activate HDMI raw on output I loose the signal on ninja completely. In general mode I'm getting the signal no problem...Ninja and S5 are both on latest updates and prores raw is activated on ninja....The only weak link is the HDMI cable( just bought a cheap generic cable). Could the cable be the problem? If I need another cable which one should I buy? Thanks
Panasonic S5 raw doesn't work on ninja v after new 10.74 update. Panasonic triggers it but ninja doesn't respond. I had to revert to previous update.....
are you still experiencing this issue ? for the life of me, I cant get my S5 to trigger record on the ninja v+ using ProRes-RAW even after downgrading to 10.73
@@PortBurwell8 Thanks for the replay, it was not the cable, issue was a step that is not mentioned on Atomo youtube video explaining how do setup RAW on S5. To be specific it was HDMI Rec output\HDMI Recording Control
I have a Problem. I try to record on Atomos for 5 days, via panasonic s5 6K video but still with poor results. I have incredible color noise in the image. I try it with iso 640 up to iso 4000 but I always have a terrible color noise in the picture ...
Using the kit lens 20-60mm at its widest, the 5.9 raw is seeing a wider view and the distortion is terrible. When shooting internal OR prores 10 bit, the distortion doesn't exist and I see what I usually see at 20mm. Whatever is making the distortion adjustment in the camera isn't transferring to the Ninja. Is this a true statement? What workflow do you suggest go correct distortion?
I believe this is because Raw formats, even compressed Raws like ProRes Raw do not pick up in camera post processing details like these and are designed to allow the user to apply it in post - this applies to noise reduction as well. I.e. out of the box the image you see from raw will tend to look worse than directly whatever comes from internal camera processing - however when you finally work with it in post - you can push it to be way better than what the camera is chucking our at you with its own processing
Thanks, that's really a great feature for S5 users. Do you have plans to support the CinemaDNG format also? If the camera is sending a raw video signal, this should be possible? ProRes RAW is a closed format and there is currently no implementation for Linux users available.
i guess im asking the wrong place but does any of you know of a way to get back into an instagram account..? I stupidly lost my password. I appreciate any tips you can give me
@Cayson Fletcher i really appreciate your reply. I got to the site through google and Im waiting for the hacking stuff now. I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.
ATOMOS can you please answer me. I have lumix s1 and they announce future updates on this camera such as raw recording over HDMI. But they always point out specially NinjaV. I myself want to buy infero or shogun 7. Will I be able to shoot raw with those monitors ? Or it’s only with ninja V ? Thank you! Best regards
Yes, it's possible to do 10 bit 422 at 4K 60P. You can check the specifications sheet on the website... With Prores RAW (12 bit) you can output 4.1K 17:9, 5.9K and 3.5K anamorphic...
@@vaidehiarts I shoot real estate and need the 10 bit 4.2.2. 60p, but also the widest possible coverage of the sensor... when using the atmos at these high settings is it still an APSC crop?
The panasonic s line facebook group its full of complains of users getting skip lines in the video while using the ninja V and the S5 and S1 (not sure about the S1H). This makes this combo complete unreliable and useless !
Absolutely love this combination! My Panasonic Lumix S5 and Atomos Ninja V are an incredible combo.
Hi, Saw you are using same setup as me, Can you please tell me if you can trigger record from the Camera when using Pro-Res-RAW, I keep getting "This operation is disabled while outputting raw data" and yes I have setup everything according to Atomos recommendation
@@patricknejad6779 it’s not intuitive but you need to enable timecode and enable it on HDMI. You’ll then be able to trigger record on the Atomos from your S5.
@@WilliamTurnerViolins I have already done that, I followed the video, but still does not work
@@WilliamTurnerViolins is yours working with Prores-RAW? I keep getting "This operation is disabled while outputting raw data" on latest firmware on both
Interesting....you instruct us to "turn power save / sleep mode off"....but when an HDMI and or the Atomos is plugged into my S1H...it disables the Sleep mode
what am I missing ?
more S1H support !!!!
Thanks for the guide. If I don't use a Mac, should I choose Apple ProRes RAW or Avid DNx for the activation?
OK, it seems that ProRes raw is the only choice for now.
It's not a problem. I am editing only on PC's and recording everything in prores. And also don't use mac. Premiere pro has prores on windows too, davinci does not, but if you are using davinci that is also not a problem.
If you don't use a Mac, you should check Apple Prores RAW support on Adobe Premiere, since you won't be able to use FCP X... Alternatively you can record Prores 422 HQ or Prores 4444 with V-Log enabled, this will work on Premiere, DaVinci resolve and Avid on Windows. Avid DNx would also work fine, on both Mac and Windows platforms, but Prores 422 HQ is usually the industry delivery format, so might be better to work in the Prores ecosystem even if not shooting RAW
@@vaidehiarts Thanks bro!
Hello, does this work with the s5 II without the paid update ? thank you
Not getting Raw signal detected on my Ninja V - is it my cable?
me too , no signal... on RAW , you are solution ?
Hmm, my Ninja's getting nothing but a colourful distortion... maybe the smallrig cables don't have the bandwidth for RAW?
Do you have a link to where I can buy this specific HDMI cable for the Panasonic S5 to Atomos Ninja? I've purchased a few HDMI cables that had specs that should have been able to handle the RAW data coming out of the S5, but they all have inconsistent connections and are therefore unusable. Thanks!
look for hdmi 2.0
Any luck with this Chris? i have the same issue!
@@osaket this official Atomos cable did the trick for RAW video - Atomos AtomFLEX PRO Micro HDMI to Full HDMI Coiled Cable (12 to 24"). The only issue is that it's not great for a gimbal set up as the cable is a bit heavy. But it's been perfect for filming raw video with the Atomos Ninja V.
@@HYOKI1991 do you get to choose 6k pro res raw? Because I dont get that with my current cable and considering other cables to see if it works?
@@osaket yes I do
how to record video thru hdmi raw output in lumix s5 in 2.4:1 (65:24) aspect ratio
💯💯💯
Hi, do you know in the case if I want to use the ninja v just for monitoring (so not shooting on RAW or ProRes .. just I want to record internally with my camera sd card) how can I do playback?
Hello Vanessa,
Thank you for your comment.
Please note that you can playback the video from the camera by going to the playback menu within your camera, the recording will be shown on Ninja V.
For further queries please reach out to our support team using the link below:
support.atomos.com/hc/en-us/requests/new
Cheers!
Mehdi
Atomos
No signal on ninja 5 when i put RAW .. , cable hdmi 2.1
so 44 minutes on a 1TB drive for 5.9K RAW right? I think where this Camera trumps bmpcc6k is that now it can do both 6K and 4K raw.
And having autofocus and 5-axis-in-body-stabilization :)
For 12bit regular could you use a cheaper monitor With the s5?
What exact cable can handle this? Could your recommend suitable for 6K RAW recordings.
i want ask, with atomos ninja V.. how about record 4K 60p, still crop to apsc mode?
Hi Fahmi, please raise a support ticket here: atomos.zendesk.com/hc/en-us/requests/new to further assist you with this.
Cheers, Atomos
Thanks for the video. Do I need to purchase for the raw output firmware like the nikon z series???
Hi Dat Luong,
Thanks for reaching out. That's correct. You'll need to download the firmware from Nikon. This can be found on the Nikon website.
Kind regards, Toby - Atomos
Great combo but not be able to record to DNxHD with S5 on it is a HUGE minus...
Hello JKruze,
Thank you for choosing our Atomos device! We're sorry to hear that you're experiencing issues with recording to DNxHD with S5.
Have you activated the DNxHD codec on your device? If not, you may need to activate it in order to record in DNxHD format. Please refer to your device manual for instructions on how to activate the DNxHD codec.
If you have already activated the DNxHD codec and are still experiencing issues, we recommend that you contact our tech team. They are ready to help you out and provide any necessary assistance to resolve the issue. You can find our support page at
atomos.zendesk.com/hc/en-us/requests/new.
Please don't hesitate to contact us if you have any further questions or concerns.
ATOMOS.
Can you please tell me if you can trigger record from the Camera "Panasonic S5" when using Pro-Res-RAW, I keep getting "This operation is disabled while outputting raw data" and yes I have setup everything according to Atomos recommendation
Hi Patrick, please raise a support ticket here: atomos.zendesk.com/hc/en-us/requests/new to further assist you with this.
Cheers, Atomos
Did you ever figure this question out?
@@dizz0lv752 yes and it works perfect
its in my below messeage which says
@Atomos, Please update your video to include HDMI Rec output\HDMI Recording Control for RAW option. its not included in your video
@@patricknejad6779 I saw that after I had already commented, thank you!
didnt work for me. didnt recognise the input
Hi , the ninja v shows no input when plugged to S5 when the camera is on "manual video mode" but when i turn the camera dial to any other option such as S,A,M, the ninja shows whats on the camera..when i press record, the file comes out as HD/59.94 rec 709, codec apple prores 422 hq, but not 4k or 5.9 prores raw. Any solution to this issue?
Hi David,
Thanks for reaching out. We've responded to your PM on Facebook to assist further :)
Kind regards, Toby - Atomos
@@AtomosChannel It would be nice to answer this question publicly as I am having the same exact problem.
@Atomos, Please update your video to include HDMI Rec output\HDMI Recording Control for RAW option. its not included in your video
Question, when using v-log and 10 bit the external recording has a very weird colour banding issue with mixed lighting (no issue when recording internally). Any idea what it could be?
Literally just got my ninja v+ and was doing some messing around in a dim room and saw the same thing. I assumed it was noise?
@@patrickmccall6212 It was not. It's a magenta/cyan banding on warmer tones. Atomos told me the unit is faulty and I'm sending it in for repair soon. Let's see
Soo will there be prores raw for the S1 tho?
The next update for the S1 in the first half of 2021 will include 5.9k RAW for the S1 to a Ninja V
and technically also 5.9K/C4K and 4K 50/60p internal 420 10bit. You can find the info from official website, search for Lumix S1 firmware 2.0
¿can I get the clips for test?
Hi guys!
I got a problem I can't solve so please advise me if you can..On my S5 as soonest I activate HDMI raw on output I loose the signal on ninja completely. In general mode I'm getting the signal no problem...Ninja and S5 are both on latest updates and prores raw is activated on ninja....The only weak link is the HDMI cable( just bought a cheap generic cable). Could the cable be the problem? If I need another cable which one should I buy? Thanks
you need a atomos HDMI cable for RAW or 60fps for it to work.
You should NOT need a cable. It worked for me when I've gone to Atomos Input tab and changed the HDMI setting to Compatibility.
@@MavenRO Thank you so much!! this fixed my issue.
Panasonic S5 raw doesn't work on ninja v after new 10.74 update. Panasonic triggers it but ninja doesn't respond. I had to revert to previous update.....
are you still experiencing this issue ? for the life of me, I cant get my S5 to trigger record on the ninja v+ using ProRes-RAW even after downgrading to 10.73
@@patricknejad6779 It's the cable. You need 8K certified cable.
@@PortBurwell8 Thanks for the replay, it was not the cable, issue was a step that is not mentioned on Atomo youtube video explaining how do setup RAW on S5.
To be specific it was HDMI Rec output\HDMI Recording Control
Does panasonic s5 support 12bit prores raw over hdmi?
Yes
I have a Problem. I try to record on Atomos for 5 days, via panasonic s5 6K video but still with poor results. I have incredible color noise in the image. I try it with iso 640 up to iso 4000 but I always have a terrible color noise in the picture ...
Likewise! Have you been able to find a solution?
I love the concert but the fan noise annoying
Is it crop with the ninja?
Using the kit lens 20-60mm at its widest, the 5.9 raw is seeing a wider view and the distortion is terrible. When shooting internal OR prores 10 bit, the distortion doesn't exist and I see what I usually see at 20mm. Whatever is making the distortion adjustment in the camera isn't transferring to the Ninja. Is this a true statement? What workflow do you suggest go correct distortion?
I believe this is because Raw formats, even compressed Raws like ProRes Raw do not pick up in camera post processing details like these and are designed to allow the user to apply it in post - this applies to noise reduction as well. I.e. out of the box the image you see from raw will tend to look worse than directly whatever comes from internal camera processing - however when you finally work with it in post - you can push it to be way better than what the camera is chucking our at you with its own processing
It’s because in-body recording corrects the lens distortion, raw does not.
Thanks, that's really a great feature for S5 users. Do you have plans to support the CinemaDNG format also? If the camera is sending a raw video signal, this should be possible? ProRes RAW is a closed format and there is currently no implementation for Linux users available.
i guess im asking the wrong place but does any of you know of a way to get back into an instagram account..?
I stupidly lost my password. I appreciate any tips you can give me
@Connor Jameson instablaster ;)
@Cayson Fletcher i really appreciate your reply. I got to the site through google and Im waiting for the hacking stuff now.
I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Cayson Fletcher it did the trick and I finally got access to my account again. Im so happy:D
Thanks so much, you really help me out :D
@Connor Jameson No problem xD
ATOMOS can you please answer me. I have lumix s1 and they announce future updates on this camera such as raw recording over HDMI. But they always point out specially NinjaV. I myself want to buy infero or shogun 7. Will I be able to shoot raw with those monitors ? Or it’s only with ninja V ? Thank you! Best regards
please for fuji xt-4)
Can anyone answer me? it is possible to shoot with Panasonic S1/S5 4K or UHD 60fps 10bit 4.2.2. using Atomos Ninja V in ProRes or Raw???
Yes, it's possible to do 10 bit 422 at 4K 60P. You can check the specifications sheet on the website... With Prores RAW (12 bit) you can output 4.1K 17:9, 5.9K and 3.5K anamorphic...
@@vaidehiarts I shoot real estate and need the 10 bit 4.2.2. 60p, but also the widest possible coverage of the sensor... when using the atmos at these high settings is it still an APSC crop?
@@micahlaplante5477 Did you find out if you can do it in full-frame? This is why I bought the camera...
@@bronsteenproductions haven't found out yet :(
@@micahlaplante5477 I believe it does not. It is also too late for me to return 😂.
I wm a davinci resolve user, so prores raw does nothing for me..
The panasonic s line facebook group its full of complains of users getting skip lines in the video while using the ninja V and the S5 and S1 (not sure about the S1H). This makes this combo complete unreliable and useless !
Not really.
PS5 and Ninja V... Nothing
useless.