Cinelifter Protek60 HD - BMPCC 4K - One Lipo
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2024
- FR :
Le premier vol du Protek 60 avec le setup complet
BMPCC4K - Laowa 7,5mm
Lipos 6S 4400 Mah
Autonomie maximum de 2min30
Le plan a été stabilisé sur Gyroflow puis j'ai ajouté la lut Gen 5 to Extend Vidéo sur Davinci Resolve
Pas de colorimétrie supplémentaire
Bilan : le vol est n'est pas simple, le drone est lourd, beaucoup de prise au vent, très bruyant, et parfois avec l'intertie/le vent généré lorsque les gaz sont à 0, le drone continue de prendre de l'altitude, (peut être l'IDLE à modifier) D'autres idées ?
Je vais essayer de fixer ça pour le prochain vol
Si vous avez des questions sur ce drone n'hesitez pas
Bon vol
ENG :
The first flight of the Protek 60 with the complete setup
BMPCC4K - Laowa 7.5mm
Lipos 6S 4400Mah
Maximum autonomy of 2 min 30
The plan was stabilized on Gyroflow then I added the Gen 5 to Extend Video lut on Davinci Resolve
No additional colorimetry
Conclusion: the flight is not easy, the drone is heavy, a lot of wind resistance, very noisy, and sometimes with the intertia / the wind generated when the throttle is at 0, the drone continues to gain momentum altitude, (will check the IDLE) Any ideas ?
I will try to fix that for the next flight
If you have any questions about this drone do not hesitate
Fly safe
Nice brooo!! Which battery are you flying?
Hey, thanks! I use Lipos 6S 4400 Mah
How did you stabilize in gyroflow when BMPCC4K dont have gyro data ? did you use data from dji 03 unit ?
If you do the update of your BMPCC you will have gyrdo data inside, i use them