How i Fully 3D Printed Porsche 911 (992) GT3 RC CAR
ฝัง
- เผยแพร่เมื่อ 8 ต.ค. 2022
- In this video I'll show you how to print and assemble your own RC CAR!
3D Printed 1/10 scale RC CAR, Porsche 911 (992) GT3 model.
Tires are printed in TPU (Rubber) Filament.
All shots are real, and some of them are captured on rolling treadmill.
CAR BODY - cults3d.com/en/3d-model/vario...
RC Car Chassis - www.thingiverse.com/thing:489...
OTHER VIDEOS YOU MIGHT LIKE:
3D Printed Tesla Roadster - • Fully 3D Printed Tesla...
3D Printed BMW E46 M3 CSL - • How i Fully 3D Printed...
3D Printed Ford Mustang GT500 1967 - • The Growing Popularity...
3D Printed RC Car - Short Film - • This Will Change Your ...
How to paint 3D Printed RC CAR - • How to paint 3D Printe...
Printing TPU Tips and Tricks - • Snapmaker 2.0 - Printi...
Facebook: / mrgoodcatt
Instagram: / mr.goodcat1
Music:
Music from #InAudio: inaudio.org/
Infraction- Arriving Light
1)
Music: Shell Ghost by Soundridemusic
Link to Video: • Cinematic Tension Trai...
2) "NEW TECHNOLOGY" by Infraction
inaudio.org/track/new-technol...
bit.ly/38egfRR
3) "COLORS" by Infraction
inaudio.org/track/colors-epic...
bit.ly/38egfRR
4) " EPIC MOTIVATIONAL" by Infraction
inaudio.org/track/epic-motiva...
bit.ly/38egfRR
5) "ARRIVING LIGHT" by Infraction
inaudio.org/track/arriving-li...
bit.ly/38egfRR
#3DPrinted #PORSCHE911 #MrGoodcat - ยานยนต์และพาหนะ
In this video you will see how to build your own RC CAR!
can we have file link
@@Lakshyarautela link is in video description but not for free
Where can i find the Electronics?
Not just the Car, your cinematography is a Serious Talent
Thank you🙌
Your work is amazing! Well done!
This is insanely cool!!
Very nice model. Video editing is also great. Luv it 😍
Learn something new everyday thank you Mr. GoodCat.
I love the timelapses for the printing shots! Have you considered making interiors too?
Thanks. No, it won't fit cause inside there are electric motors batteries and etc...
Did you pause the print on each layer to get that Timelapse? How did you get the printer head out the way
Yoooo nice video the car looks awesome! I would’ve like the color to be white but that’s just personal preference. Hope you continue to make such good videos!
Beautiful video!
Wont the motor gears get worn off gradually? Can you provide a link for alternate metal gears as replacement?
just a little tip from my side, you should try resin printers or printing at a lower layer height for less post preparation like sanding.
Quality content
Amazing work. Is there a program that automatically adds connector points to builds when you need to break them apart to build? It would make getting it aligned in glue up easier.
Thank you. There is one program, materialise magics but it's not free
How did you model it??
Good job
Well done!
Thank you!
any 911 turbo S's?
The edition is very good and action
Thank you🙏
How wide are the wheels? I would like to buy the tires instead.
Great Job
what glue do you use?
when is the project one coming?
Thanks. I'm using super glue. Project one will be soon, at the moment i'm creating a new adaptable chassis for it
Very nice
BMW z4 gt3 next?? But u already made a bmw so maybe a mercedes amg gt3 next?
I would like to know what type of plastic you used for the headlights. I experimented with few and did not find the right one. By the way, video was cool.
Thank you! I used transparent PVC Film for headlights
Looks really cool but you need a better chassis just look at that wheel wobble it's the first thing that the viewer will notice but the body it's self looks awesome great job
Yes you're right, i have bought buggy rc and hope i'll use its chassis in future
Very Impressive
Thank you!
Wooooooo
Nice work. But the layers are horribly visible and look not each same. Something seems to be wrong in your settings.
No, it is smooth. Light source it on top and that's why it seems like that, only spoiler part had some artifacts
cool car! nice video! what is your 3d Printer?
Thank you. Snapmaker 2.0 A350
U should tottaly make a Ferrari 458 italia next!
super cool! What filament did you use to print the body? PLA or PETG?
PLA+
did you use pla or petg ???you mentioned only tpu for the tyres......nice video
Body is made with PLA + and tires are TPU
@@MrGoodcat1 is it durable? What if the car run in a tropical place?
@@DnKcorner it is durable if there won't be any contacts (crash) on walls or ect...
BMW m135i f40?
Which 3d printer do you use? As even I need one to print turbines with high efficiency.
Snapmaker 2.0 A350
👏👏👏👏👏
Can you upload a tutorial for car modeling?
i don't do modeling tutorials but there are lots of them here on youtube
@@MrGoodcat1 I know but I need to know how you can make these pieces separately 😭
What slicing program did you use?
Cura
How do you get the supports to remove so easily?
Well there are lots of options in support tab and after lots of tweaking i got nice results. i also use support interface
Whats the wheelbase? Looks nice!
It's 245mm
I dont have a printer but i wanted to know how much it ll cost me if i go to a private printer, i know its per/ hours. Is it worthy or just for 3d printer owner only ?
I have no idea. It was printing near 72 hours or so
Mr good cat it is my humble request to make the modified cars like zyphers designs makes pls
What modelling software did you use for this?
Houdini
What is the name of the material you use to make the headlights?
I'm not sure, but it is same as transparent containers for food and etc
Nice brother 👍👍👍👍👍
Thanks ✌️
My question about electronics which motor T did you use? I want 12T motor but i dont know how its driving and which battery did you use 2s or 3s?
Hello. I was using 540 motor with 2S battery
@@MrGoodcat1 Thanks
@MrGoodcat1 please make one Koenigsegg CC first prototype, McLarenF1 LM orange and Detomaso P1
At the moment i'm doing Mercedes AMG: Project One. Maybe I'll do it in future
Where can I get the measurements for this. I have an Engineering project to finish 😭😭
It is 1/10th scale model of a real car
If I had the means to have a printer like this I would make it to sell a lot of cars and other things too😢
please consider making Hyundai N Vision 74
Maybe in future
Did you use any scaling when printing body? I see it has 245mm wheelbase and chassis is adjustable from 258mm to 288mm so in theory it should not fit
I haven't scaled anything. You have to adjust chassis and it will fit without any problem
should to polish all surface for perfect car
What is the average weight of all 3d printed parts
I'm not sure, maybe less than half kg
Which printer do you use?
Snapmaker 2.0 a350
How many grams of plastic consumed in the car body and tires?
Don't remember, but less than 1kg
make a randrover 2023
set your printer. low quality . use Alchlade2 for paint and use coat shiny
f1 car with 3d printed suspension parts
Printed it, wheels fitted to the axles, wheels sticking out on the sides of the body, almost 10mm each side
You should modify your chassis to fit properly. At the moment i'm doing new adaptable chassis for my new project
@@MrGoodcat1 i did adapt the chassis, the length is fine but the width is an issue...the wheels is sticking out on the sides, the issue is the offset on the rims
@@johanstrauss81 Should scale down some axis parts. For example something like this: mega.nz/file/MBlDAa5D#Vjnxtne-YotqrSBCkTP7j5Qm5wOAP6pyyvO9mspbg3A
@@MrGoodcat1 thanks. I will give it a try
@@johanstrauss81 may i ask which parts you adjust to make the chasis fit the wheel base?
how much is the total cost ?
If you are asking only printing, than near 1kg of PLA filament
@@MrGoodcat1 how much with the electronics too?
@@MTBValdan near 100$
@@MrGoodcat1 that's kinda pricey 😅, thank you for answering my question tho
Where does the electrictronics gone
It's inside)
@@MrGoodcat1 that i know but it's not the video
can I have the file plss
download link is in description, but not for free
Ferrari F45 build
Bet the crashes are spectacular
haven't tried yet😀
😅
𝐩яⓞ𝓂𝓞Ş𝐦
Bal banaiso from Rifat