hello, i really appreciate the helpful videos on oberkochen binoculars. may i ask you a few questions please? ... 1. should the collimation be readjusted after the prism was taken off for cleaning? 2. does the prism have adjustment points for collimation, such as screws that would push it into place? thank you in advance 😊
in these binoculars, after dismantling the prism, cleaning and installing it in place, the collimation may go astray and the binoculars will start to double. on the platform where the prisms are fixed, there are clamping screws that keep the angle between the prisms at 90 degrees. it is possible that later you will have to adjust the binoculars using lenses (large lenses)
Hello - I am about to start dismantling and cleaning a pair of these lovely 10 x 50s. I am always having problems replacing the small central counter-screw in all the binoculars I'm fixing. How do you line it up with the existing hole? Do you mark the spot with a pencil? Thanks!
under small central counter-screw there should be a small pit (recess). and you must spin with ease. and if it is difficult to spin, then you have not hit the hole
OK - thanks, that's what I thought. I need to make a pencil mark. It's amazing that the whole success of the repair depends on that tiny counter-screw!! I'm going to finish up my 3rd pair of Deltrintems and then I will do my Oberkochens, following your guide. After that some Dekorems! Thank you again for your most excellent videos - I have learned so much from you! @@StOKRATzoom
В оберкохені якість корпусу дуже подобається, але одночасно і збільшується кількість деталей і в складність в ремонті. В об'єктиві кількість елементів мабуть в два рази більше ніж в біноклях з Єни. Я сумніваюсь що людське око може відрізнити результат одношарового і багатошарового просвітлення
Finally I bought a binocular like this. It was full of fog, but after cleaning the prisms, the image is superb. But I have other problems with the prisms. After I clean them and assemble the binocular there are small black residues left on the prisms. Every time in different position. Have you encountered this problem?
maybe it's paint or dust. after installing any lens or prism, you need to strongly blow the binoculars so that all small particles fly out of the binoculars
@@StOKRATzoomI have a small hand blower like yours, but after I blow the lenses there are small electrified dust particle that sticks to prisms. That's becouse I use this hand blower
Hi, thanks for the video, very informative. May I ask you, at 2:23 you removed a tiny screw (counter screw?). Do you know the dimensions of this screw please. Thanks.
Nice job sir. I have a later model Jenoptem and instead of the screw on the eyepiece bridge there is only a plate. In this case, how can I remove the eyepieces? Do you have experience here?
Jenoptem and Oberkochen are different binoculars, they were made in different factories. Jenoptem is the German Democratic Republic. Oberkochen is West Germany Federal Republic of Germany. I have videos of other zeiss
@@StOKRATzoom I know that and it's common knowledge. I also watched the other videos. What I mean is, the later models don't have the screw in the middle of the eyepiece bridge like all your models in the videos do. Instead of the screw and cover they have a round plate. Perhaps to avoid being opened up by unskilled people.
@@StOKRATzoom Sure. So, i found here a video ...mine is serial number 65..... approximately from year of manufacture 1986 and I think from this serial number the screws were replaced. th-cam.com/video/-d2XCU-ZezE/w-d-xo.html
Привет! Хороший обзор! Да юстировка на этих биноклей сложна первый раз вижу. Интерес вам вопросах много тем боле вы говарите на украинском языке понимаю наверно 30%. Есть разница по качеству зборки по надежности по качеству стекла, линзы 2-слоиный или 3-слойный, светозащита, чернение женоптем, декарем, декарис и т д . Я думаю у цейсах женоптем, декарем, декарис герметичность слабо с сранением ссср как вы думаете?Думаю оберкохен намного лучше чем эти цейсы?Ну они дорогие. Забыл спросит чем чистите призмы?
![[LIVE] : ONE ลุมพินี 87 วันนี้!! คู่เอก "ก้องชัย vs โชคปรีชา"](http://i.ytimg.com/vi/YN6e7HVnekw/mqdefault.jpg)
Beautiful binocular. I have the 8.30.
👍👍👍
Доброго вечора,я вважаю,що цей ьінокль я ось купив,томущо і вмятинатака ж😂
🔥
hello, i really appreciate the helpful videos on oberkochen binoculars. may i ask you a few questions please? ...
1. should the collimation be readjusted after the prism was taken off for cleaning?
2. does the prism have adjustment points for collimation, such as screws that would push it into place?
thank you in advance 😊
in these binoculars, after dismantling the prism, cleaning and installing it in place, the collimation may go astray and the binoculars will start to double.
on the platform where the prisms are fixed, there are clamping screws that keep the angle between the prisms at 90 degrees.
it is possible that later you will have to adjust the binoculars using lenses (large lenses)
@@StOKRATzoom thank you very much for your detailed explanation!!
Hello - I am about to start dismantling and cleaning a pair of these lovely 10 x 50s. I am always having problems replacing the small central counter-screw in all the binoculars I'm fixing. How do you line it up with the existing hole? Do you mark the spot with a pencil? Thanks!
under small central counter-screw there should be a small pit (recess).
and you must spin with ease.
and if it is difficult to spin, then you have not hit the hole
opposite the hole, you can draw a mark with a pencil
OK - thanks, that's what I thought. I need to make a pencil mark. It's amazing that the whole success of the repair depends on that tiny counter-screw!! I'm going to finish up my 3rd pair of Deltrintems and then I will do my Oberkochens, following your guide. After that some Dekorems! Thank you again for your most excellent videos - I have learned so much from you! @@StOKRATzoom
careful with the rubber bands on the glasses@@jameslehmann3598
Have you ever repaired Hartmann Wetzlar 117 binoculars? These have lovely optics! @@StOKRATzoom
ВАК 4 це СССР барієвий крон вони жовтять,німецькі ,тяжкий крон і сллюда. ВК7. КА9 ,пластмаса
Якщо ви знаєте де є цікава інформація про марки оптичного скла, дайте посилання, буду дуже вдячний
Hello. Comparing to Carl Zeiss Jena 10x50 Jenoptem/Dekarem multi coated, wich one is better? In therms of image sharpness and area of clear.
Oberkochen better I think.
Вітаю.
Як він вам в порівнянні з декаремом з багатошаровим просвітленням ? Декарем певно більш яскравим є , а чіткість зображення краща в оберкохена ?
В оберкохені якість корпусу дуже подобається, але одночасно і збільшується кількість деталей і в складність в ремонті. В об'єктиві кількість елементів мабуть в два рази більше ніж в біноклях з Єни.
Я сумніваюсь що людське око може відрізнити результат одношарового і багатошарового просвітлення
Finally I bought a binocular like this. It was full of fog, but after cleaning the prisms, the image is superb.
But I have other problems with the prisms. After I clean them and assemble the binocular there are small black residues left on the prisms. Every time in different position. Have you encountered this problem?
maybe it's paint or dust.
after installing any lens or prism, you need to strongly blow the binoculars so that all small particles fly out of the binoculars
@@StOKRATzoomI have a small hand blower like yours, but after I blow the lenses there are small electrified dust particle that sticks to prisms. That's becouse I use this hand blower
Hi, thanks for the video, very informative. May I ask you, at 2:23 you removed a tiny screw (counter screw?). Do you know the dimensions of this screw please. Thanks.
I don't think he is very important. but ok, I will measure with a micrometer
diameter 0.8mm-1mm
height 1.5mm-2mm
@@StOKRATzoom Дуже дякую за ваш час і зусилля. Я сподіваюся, що цього року у вас все буде добре.
Дякую. А по іншому і бути не може. Ви звідки дивитесь мій канал?
@@StOKRATzoom Я з Великобританії і тисну вам руку. Хай живе Україна - Слава Україні.
Чи зручні маленькі викрутки такогоплану як у вас? Це Pro'sKit?
Я не знаю що за фірма. Так зручні бо та частина яка впирається в долоню прокручується. Але такими малими викрутками закисші гвинти не відкрутиш
here the subutitles do work. :-)
Nice job sir. I have a later model Jenoptem and instead of the screw on the eyepiece bridge there is only a plate. In this case, how can I remove the eyepieces? Do you have experience here?
Jenoptem and Oberkochen are different binoculars, they were made in different factories. Jenoptem is the German Democratic Republic.
Oberkochen is West Germany Federal Republic of Germany.
I have videos of other zeiss
th-cam.com/video/BxN_kzy4GlA/w-d-xo.html
th-cam.com/video/LxwskWimqmk/w-d-xo.html
th-cam.com/video/SmvmXO88ZME/w-d-xo.html
@@StOKRATzoom I know that and it's common knowledge. I also watched the other videos. What I mean is, the later models don't have the screw in the middle of the eyepiece bridge like all your models in the videos do. Instead of the screw and cover they have a round plate. Perhaps to avoid being opened up by unskilled people.
give a link to binoculars similar to yours. I will look on the Internet and answer
@@StOKRATzoom Sure. So, i found here a video ...mine is serial number 65..... approximately from year of manufacture 1986 and I think from this serial number the screws were replaced.
th-cam.com/video/-d2XCU-ZezE/w-d-xo.html
What is the price this10×50 carl Zeiss binocular.
approximate cost $300~$400
На ebay от 400$ за сильно подержанный до 1200$ за юбилейный в отличном состоянии
Тільки скажіть,будь ласка,чому колесико центр фокусуваннЯ заїдає чогось,впрапо легко,а назад наче заскакує,😮
Погано затягнута центральний гвинт що з'єднує окуляри
Привет! Хороший обзор! Да юстировка на этих биноклей сложна первый раз вижу. Интерес вам вопросах много тем боле вы говарите на украинском языке понимаю наверно 30%. Есть разница по качеству зборки по надежности по качеству стекла, линзы 2-слоиный или 3-слойный, светозащита, чернение женоптем, декарем, декарис и т д . Я думаю у цейсах женоптем, декарем, декарис герметичность слабо с сранением ссср как вы думаете?Думаю оберкохен намного лучше чем эти цейсы?Ну они дорогие. Забыл спросит чем чистите призмы?
оберкохен кращий ніж Jena.
герметизація гірша але в ремонті і довговічності краща.
використовую ізопропиловий спирт.
Jena не чорнить призми
Западногерманский цейсс лучше гедеэровского цейсса, как мерседес лучше трабанта.
Потому что, лучших специалистов, вывезли в СССР, США и западную Германию, а в ГДР специалистов осталось очень мало.
А ви знаєте чому в ссср біноклях жовтить зображення
Why?