Where can I obtain the observed data that you are using in the calibration videos (observed_et_mon_basin, observed_flow_day_cha_1, observed_nitrates_day_cha_5 ). The only observed data that has been provided in the robit data files is the monthly flow data
Thank you for the great informative tutorials. Where can I obtain the observed data that you are using in the calibration videos (observed_et_mon_basin, observed_flow_day_cha_1, observed_nitrates_day_cha_5 ). The only observed data that has been provided in the robit data files is the monthly flow data
Hi. Thanks a lot for this tutorial. It is very helpful. I have one question though. What do we mean by 'minimum' and 'maximum' when we are adding the parameters? I noticed that the minimum and maximum range you give for some parameters (like cn2: -30 to +30) is totally different from the absolute range of the parameter (cn2: 35 to 95). Best regards.
I would like to test the program, but I don't see the toolbox tab in the SWAT+ module in QGIS. You mention it might be because I did not use recomended settings during installation of swat+ so I'm reinstalling swat+. I can only choose between Custom installation, Typical installation and full installation. Which one should I choose? Thanks in advance!!
@@SanyamGhimire I still don't see it in the Qgis swat module, but I did manage to use the toolbox. Just open the swat toolbox exe from the installation folder or click the desktop shortcut. Let me know if it does not work.
Hi, when I try to install SWAT+ toolbox, I get a message saying "cannot be installed on systems with screen resolution smaller than 1280 x 960, on my laptop the highest display resolution is 1366 x 768. So I am not able to install it, is there any other way I can install SWAT+ toolbox?
Thank you for the excellent tutorial. I wonder if anyone can help answer my question- I am using Swat+ Toolbox v1.0. In this version, I do not see the option to add nutrient observations. Is there a way to add nutrient observations to my model?
Hi. What if we have only monthly base observation for flow data. What date format do we have to set up in our system. Is there a possibility to set up it as mm.yyyy?
The name of the parameters in SWAT2012 and SWAT+ is not the same. Some of the names of the parameters are changed (E.g manning is changed to ovn ). Where shall I get the equivalent names for all of the parameters to use them in SWAT+?
I had a similar question. I checked the user manual for SWAT+ and compared it with the manual of SWAT. So for example "gw_delay" in SWAT is just called "delay" in SWAT+. But I am not sure. Were you able to figure it out ?
Hello. Thank you for all your supports. I tried to use swat+toolbox for calibration on windows 11, core i3 machine, but failed to run. Is there any alternative to run it on i3 machine, RAM 4 ? Otherwise it forces me change a machine without plan? Please?
Thank you for your introduction and tutorials! It's very useful. I have a question is why not using IPEAT+ for the calibration model? and the previous video using IPEAT+ why missing?
@@openwaternetwork Thank you for your reply. Because I used IPEAT+ encounter problems before, but I don't know how to fix it. So if I use SWAT+ rev.59.3 to simulation you will recommend using SWAT+ Toolbox to calibration my flow output? The SWAT+ Toolbox also can automate calibration like IPEAT+ right?
@@openwaternetwork Thank you for your reply. I have a parameters question about this program so I sent an e-mail to you. If you can reply to the e-mail will very helpful for me.
I'm trying to use or referred software, but whenever I try to run-it appears a message "an error occured while running SWAT+ -Make sure output files are not open. Try running the model executable in TXTInOut." But there is no open file. I don't know what I'm doing wrong
@@openwaternetwork I redid the entire procedure and now when I try to open the SWAT + toolbox (Step 4) in QGIS the following message is displayed: "Cannot access Shapefile because they are in use QSWAT +. Closse the QSWAT + Project First. " When I try to create a project directly in the SWAT + Tool box the previous error is shown.
Hello, after calibration (using the calibration years) how would I proceed now to the validation process using this software? Should I run a new model under the Run Model with dates under my validation period? Thanks!
Hi. I was just wondering why the observed variables are so different for the latest version of toolbox. Is it possible to still input nitrogen and phosphorus observed values csv?
I want to know which version of QGIS, SWAT+ installer and SWAT+ toolbox i should use? I'm new to this. I tried QGIS22.5, swat+2.1 and toolbox0.76. but it's giving wrong discharge simulation.
Hi, How can I write the date for data monthly? I'm running the SWAT+ Toolbox but I need the "channel_sdmorph_mon" and my directory TxtInOut don't have this. Thanks.
If you use the channel_sdmorph file in QSWAT+, you will get same results as SWAT+ Toolbox. the channel_sd_ files do not give correct flows at monthly and yearly timesteps
@@openwaternetwork Thanks a lot. This tool and your tutorials are such a good resources for the new learners. Currently running a daily calibration now. :D. Again much appreciation for your work.
following the steps in your video, at the time of calibration the results of NSE, RMSE, PBias are still in NaN, as shown at 16.33 minutes. I only use one object type, which is flow. my system date already in dd/mm/yyyy, please need advice, thank you. btw for update to swat+ rev 60.5, I only run executable rev 60.5 in swat+ toolbox installation directory, is that correct?
![ปฏิเสธไม่ไหว (Crush on you) - LIPTA feat. No One Else [TEASER MV]](http://i.ytimg.com/vi/VC689EgdSIw/mqdefault.jpg)
Thanks a lot for this tutorial. I have a problem to integration with QSWAT 3.28. any solution for this issue?
Where can I obtain the observed data that you are using in the calibration videos (observed_et_mon_basin, observed_flow_day_cha_1, observed_nitrates_day_cha_5 ). The only observed data that has been provided in the robit data files is the monthly flow data
Thank you for the great informative tutorials. Where can I obtain the observed data that you are using in the calibration videos (observed_et_mon_basin, observed_flow_day_cha_1, observed_nitrates_day_cha_5 ). The only observed data that has been provided in the robit data files is the monthly flow data
Hi. Thanks a lot for this tutorial. It is very helpful. I have one question though. What do we mean by 'minimum' and 'maximum' when we are adding the parameters? I noticed that the minimum and maximum range you give for some parameters (like cn2: -30 to +30) is totally different from the absolute range of the parameter (cn2: 35 to 95). Best regards.
Thanks Jemese, for this great contributions , you are hard working!!
I would like to test the program, but I don't see the toolbox tab in the SWAT+ module in QGIS. You mention it might be because I did not use recomended settings during installation of swat+ so I'm reinstalling swat+. I can only choose between Custom installation, Typical installation and full installation. Which one should I choose? Thanks in advance!!
This is very useful especially in Africa where licensed softwares are least appreciated and a bit difficult to afford buying.
Well done James!
Did you get the answer?
@@SanyamGhimire I still don't see it in the Qgis swat module, but I did manage to use the toolbox. Just open the swat toolbox exe from the installation folder or click the desktop shortcut. Let me know if it does not work.
@@samh2023 Thank you Sam for the prompt reply. I too managed it to open it from start menu. Although, toolbox is not being appeared in QSWAT+.
The flow is in m^2/s ?
where I can find the observed data?
Hi, when I try to install SWAT+ toolbox, I get a message saying "cannot be installed on systems with screen resolution smaller than 1280 x 960, on my laptop the highest display resolution is 1366 x 768. So I am not able to install it, is there any other way I can install SWAT+ toolbox?
Thank you for the excellent tutorial. I wonder if anyone can help answer my question-
I am using Swat+ Toolbox v1.0. In this version, I do not see the option to add nutrient observations. Is there a way to add nutrient observations to my model?
Hi. What if we have only monthly base observation for flow data. What date format do we have to set up in our system. Is there a possibility to set up it as mm.yyyy?
What does negative Sensitivity mean?
The name of the parameters in SWAT2012 and SWAT+ is not the same. Some of the names of the parameters are changed (E.g manning is changed to ovn ). Where shall I get the equivalent names for all of the parameters to use them in SWAT+?
I had a similar question. I checked the user manual for SWAT+ and compared it with the manual of SWAT. So for example "gw_delay" in SWAT is just called "delay" in SWAT+. But I am not sure. Were you able to figure it out ?
Hello. Thank you for all your supports. I tried to use swat+toolbox for calibration on windows 11, core i3 machine, but failed to run. Is there any alternative to run it on i3 machine, RAM 4 ? Otherwise it forces me change a machine without plan? Please?
Thank you for your introduction and tutorials! It's very useful.
I have a question is why not using IPEAT+ for the calibration model? and the previous video using IPEAT+ why missing?
@@openwaternetwork Thank you for your reply. Because I used IPEAT+ encounter problems before, but I don't know how to fix it.
So if I use SWAT+ rev.59.3 to simulation you will recommend using SWAT+ Toolbox to calibration my flow output? The SWAT+ Toolbox also can automate calibration like IPEAT+ right?
@@openwaternetwork Thank you for your reply. I have a parameters question about this program so I sent an e-mail to you. If you can reply to the e-mail will very helpful for me.
I'm trying to use or referred software, but whenever I try to run-it appears a message
"an error occured while running SWAT+ -Make sure output files are not open. Try running the model executable in TXTInOut."
But there is no open file.
I don't know what I'm doing wrong
@@openwaternetwork I'll try again and return here for feedback
@@openwaternetwork I redid the entire procedure and now when I try to open the SWAT + toolbox (Step 4) in QGIS the following message is displayed:
"Cannot access Shapefile because they are in use QSWAT +.
Closse the QSWAT + Project First. "
When I try to create a project directly in the SWAT + Tool box the previous error is shown.
I'm having the same problem as you. moreover after installing the toolbox it did not appear as step 4 as shown in the video.
Hello, after calibration (using the calibration years) how would I proceed now to the validation process using this software? Should I run a new model under the Run Model with dates under my validation period? Thanks!
Hi. I was just wondering why the observed variables are so different for the latest version of toolbox. Is it possible to still input nitrogen and phosphorus observed values csv?
I want to know which version of QGIS, SWAT+ installer and SWAT+ toolbox i should use? I'm new to this. I tried QGIS22.5, swat+2.1 and toolbox0.76. but it's giving wrong discharge simulation.
Hi, How can I write the date for data monthly? I'm running the SWAT+ Toolbox but I need the "channel_sdmorph_mon" and my directory TxtInOut don't have this. Thanks.
Is the revision 60.5 available for download from SWAT website?
@@openwaternetwork Thanks. Really a fan of your good works.
I import textinout to toolbox....but I saw the model flow is way less in toolbox compared to the flow shown by qswat model...
If you use the channel_sdmorph file in QSWAT+, you will get same results as SWAT+ Toolbox. the channel_sd_ files do not give correct flows at monthly and yearly timesteps
how did you address this?
Is this tool capable of multisite and multi objective function calibration process?
@@openwaternetwork Thank you for the information. That feature would be really great.
What would be the date time format for a monthly observed data @Open Water Network. TIA.
@@openwaternetwork Thanks a lot. This tool and your tutorials are such a good resources for the new learners. Currently running a daily calibration now. :D. Again much appreciation for your work.
following the steps in your video, at the time of calibration the results of NSE, RMSE, PBias are still in NaN, as shown at 16.33 minutes. I only use one object type, which is flow. my system date already in dd/mm/yyyy, please need advice, thank you. btw for update to swat+ rev 60.5, I only run executable rev 60.5 in swat+ toolbox installation directory, is that correct?
Done, edit observed data with notepad as you showed in this tutorial, but the NSE value are negative.
@@openwaternetwork swat+ toolbox v0.8.6, the date format is not as suggested in the video?