Great video! I own a Kubota but it doesn't really matter as all of these attachments are applicable. Thank you for all the time and effort you put into your channel.
There are a lot of addons, etc. in this great video that are great for all tractors. Brushguard - get one, even if you have to get your local machine shop to make you one. So worth it. 🙂 Lube shuttle upgrades - upgraded my lube shuttle with a long locking connector, longer hose, and a holder. Thank you code GWT! 😄 Stump bucket - some will say tractors are not good for stump buckets but I have used them for years without any issue. Use finesse instead of force and they will reward you! Pipe plug - awesome for extra storage and/or secret compartment. Heck with cash under my mattress, how many people would look there for my cash? 😂 Again great video as always!
Videos and information provided are great and well done. I believe you would like to look at what I consider the best set up on the 4066R which is the Erskine 725FM. Front mount snowblower. It is an awesome set up driven off of rear pto with full HP of PTO, no power box or hydraulic motors required, awesomely heavy duty. Had lots of John Deere set ups but none as perfected as this.
Love it! I'm from NH and I'm "Thumbs up" number 603, perfect! You got #603 from the 603! and I own an orange tractor but will still watch a GWT video about green ones. Thank you, sir!
Another great job Courtney! Gives a lot of info that is great if in future some of us upgrade to the 3r or 4r or just add the the tractors one may have. Have a good day Courtney and be safe . Tks Tim
Nice video. I have a 4052M great tractor I love it!! My two favorite attachment are my backhoe a Woods BH85 and my Wallenstein 7" hydro feed chipper both are great peaces of equipment. Keep the great videos coming!
We got a John Deere 5075E where I work, and I have to say I would have preferred an equivalent of a Kubota, we already have a 2001 M6800 that we’ve never had issues with and still love. The JD 5075E sometimes doesn’t go into gear, not a huge fan of the transmission, and has had sensors go bad and it’s a 2018. I’m thinking maybe the 5085 would have been better since it’s a bigger platform and engine, but we’ll never know. Thanks for the vids! Great work!
Courtney, Great video on the 4000 series tractors, thanks for all your hard work and effort in putting it together. I own a 4720 and am fortunate to have most of the attachments you mentioned, thanks to many of your videos. One small item I would recommend is the steering wheel knob. I would suggest purchasing the JD one, even though a little more expensive it will have a thumb that rests on the spoke of the steering wheel for more support. That was a great video you put together on the MK pull type snowblower. I'm wondering if you felt the rear scrapper blade was effective and worth the extra cost? I'm considering one of these snowblowers for next year. I currently have a 3pt. 72" and am tired of twisting my neck driving backwards, and am thinking that driving over the snow is not a deal breaker. thanks, Bob
I am looking at either a 4 or 5 series for a small 35 acres farm I am starting up. I will be doing crops, hay and other little chores. I have already have a 1025r that will doing garden work and other little chores. What would you recommend for planting, disc, finishing and bay work
Thanks for the great video! I’m waiting on delivery of a new 4052R. I’m upgrading from a 3033R. The dealer will be adding liquid ballast to the rear tires. Among other things, the tractor will be used to move large round hay bales. My JD dealer claims I won’t need any additional rear ballast. I’m not sure I agree. I have a ballast box that I used on my 3R, but I’d like to get away from using that, if at all possible. What do you think?
Thank you for all your valuable tips and information. I am looking to buy a John Deere series 4 tractor and want to ensure I trick it out to give me the best utilization. I am a subscriber and enjoy all your videos, you do talk fast so I really have to pay attention 😂😂. My question to you is, 1) do you ship to Canada and 2) do you have shipping points in the Montana area I could access? Again thank you for all the valuable information, all the best to you for 2023.
Good info! For clarification, a 4044M series with the 400E loader doesn’t have the hole for a mirror. You will have to find another solution for the mirror.
Can you post a link to the toolbox bracket? I can't seem to find a kit or the solo bracket and the link in description doesn't indicate if it has a bracket or just the $104 toolbox. I have a 4052R with cab and am sick of having stuff under my feet. Also - slick idea for the torq bar with the PVC plug. Buying a pair this weekend.
Nice stuff! Do they make a grill guard to fit the 1025R? I know this is a 4 series video, but good application for one on the 1,2 series etc. I've had (I'm sure others have too) some close calls with branches. thanks for sharing!
I found this guy on Ebay and Facebook. I gotta reach out to him to get more info still, but looks solid. www.ebay.com/itm/John-Deere-Grill-Guard-Brush-Guard-Insert-2025R-1025R-1023E-/303845200364
Are there mirror options for the 3 series? I do not have those holes in the loader arms. And what size and price would I be looking at for a flail mower?
Can you recommend anything like the mirrors or other custom things for a 3038e? Also have you ever seen a conversion that you can use on a john deere quick attach to a pin attach on the front end loader? also thanks for all the great info and videos :)
I upgraded from a 4500 to a 4720. I always run with tire chains on the rear tires. Do you or your viewers favor tire chains ? I never see tractors with chains on the videos. Thanks !
As usual, a great overview of the attachment options. There is a HLA snow pusher in my future! I have a 4066R and would like to add the same fender extensions as are on your machine. Where did you source yours?
Love your channel. I am a mahindra guy I have 2015, 2540. Would you be willing to do a comparison between a equivalent Mahindra and John Deere. I'm wondering how they. If I lived closer I would volunteer to bring mine out. The thing that really stilled me to Mahindra was no DPF or Def fluid to meet tier four requirements.
I've been watching your videos, trying to educate myself. I am torn between a 3R series or a 4R series. One implement that I would like to run is a front mount snowblower. The 4 series doesn't have a midmount PTO. Was wondering if it can still be run on a 4 series with the extra hyraulic hookups, ie the 3rd function option or some other manner. Sorry, newbie here. Thanks for any information.
I have both on different tractors. They are both wonderful. It all comes down to if you like modifying your bucket or not. With the Heavy Hitch no modification needed. I will say though with the Pirahna I have never felt the need to remove it. It is a permanent fixture to the bucket for me. With the Heavy Hitch I sometimes remove it for fine aggregate (sand, small base, etc.) work. It really is a tough decision between the two. 🙂
I have a question I seen a little tractor in the background of the implements that was an older very old I have interest in it what can you tell me about it
We have a JD5075E with the 520M loader. Do you know if anyone makes a side tip bucket for it? It would be really useful for us, but I have had no luck finding one.
Looking for a 3 point hitch stump grinder for my JD 3033R, Could you quote me pricing on a Baumalight , I'm not going to use it other than for my personal property stump clearing for yard areas and field & path clearing ( I can pick it up at you place ) Thank you pc
Love your videos, so informative. Just wanted to let you know about WoodMaxx wood chippers. They can chip up to 9" with power feeder. I have one and love it.
Another quality presentation. Ive been watching a heap of your videos they’re great.
Awesome! Thank you so much!
Great video! I own a Kubota but it doesn't really matter as all of these attachments are applicable. Thank you for all the time and effort you put into your channel.
I appreciate you taking the time to stop by!
i know I am pretty randomly asking but do anyone know of a good place to stream newly released movies online ?
@Gael Ridge Flixportal xD
@Rayden Yousef Thanks, signed up and it seems to work :) I really appreciate it!!
@Gael Ridge no problem :D
You do a great job Sir! I can see and feel your core values through your video. Durability at a great price. Value at its best!
There are a lot of addons, etc. in this great video that are great for all tractors.
Brushguard - get one, even if you have to get your local machine shop to make you one. So worth it. 🙂
Lube shuttle upgrades - upgraded my lube shuttle with a long locking connector, longer hose, and a holder. Thank you code GWT! 😄
Stump bucket - some will say tractors are not good for stump buckets but I have used them for years without any issue. Use finesse instead of force and they will reward you!
Pipe plug - awesome for extra storage and/or secret compartment. Heck with cash under my mattress, how many people would look there for my cash? 😂
Again great video as always!
Happy Holidays great product's
Videos and information provided are great and well done. I believe you would like to look at what I consider the best set up on the 4066R which is the Erskine 725FM. Front mount snowblower. It is an awesome set up driven off of rear pto with full HP of PTO, no power box or hydraulic motors required, awesomely heavy duty. Had lots of John Deere set ups but none as perfected as this.
Love it! I'm from NH and I'm "Thumbs up" number 603, perfect! You got #603 from the 603! and I own an orange tractor but will still watch a GWT video about green ones. Thank you, sir!
Good presentation! I liked it...
Great video thanks for sharing with us
Another great job Courtney! Gives a lot of info that is great if in future some of us upgrade to the 3r or 4r or just add the the tractors one may have. Have a good day Courtney and be safe . Tks Tim
another great video! if I only had the funds I have a pretty big shopping list from here
I would like to see this for 3 series tractors. Especially as a newbie it would be so helpful. Great videos, still loving my 3025e I got from ya.
Great video!
Nice video. I have a 4052M great tractor I love it!! My two favorite attachment are my backhoe a Woods BH85 and my Wallenstein 7" hydro feed chipper both are great peaces of equipment. Keep the great videos coming!
Very cool, thanks for taking the time to share!
Another awesome video! Can’t wait to see the flail mower vs rotary cutter video
Ah thanks nice info and ironically I had asked about the tires in the last video comment :) So seems you did that aftermarket then.
We got a John Deere 5075E where I work, and I have to say I would have preferred an equivalent of a Kubota, we already have a 2001 M6800 that we’ve never had issues with and still love. The JD 5075E sometimes doesn’t go into gear, not a huge fan of the transmission, and has had sensors go bad and it’s a 2018. I’m thinking maybe the 5085 would have been better since it’s a bigger platform and engine, but we’ll never know.
Thanks for the vids! Great work!
Great video! Some interesting ideas for my new Kubota 3560
Nice tractor, front snow blower would be the Ultimate attachment !
Haha, just might be!
Courtney, Great video on the 4000 series tractors, thanks for all your hard work and effort in putting it together. I own a 4720 and am fortunate to have most of the attachments you mentioned, thanks to many of your videos. One small item I would recommend is the steering wheel knob. I would suggest purchasing the JD one, even though a little more expensive it will have a thumb that rests on the spoke of the steering wheel for more support.
That was a great video you put together on the MK pull type snowblower. I'm wondering if you felt the rear scrapper blade was effective and worth the extra cost? I'm considering one of these snowblowers for next year. I currently have a 3pt. 72" and am tired of twisting my neck driving backwards, and am thinking that driving over the snow is not a deal breaker.
thanks, Bob
great vid and info
Even the very first,least expensive was unknown to me and will help big time
You do an excellent job in presentation and coverage of material content explained in your videos! Thank you.
I am looking at either a 4 or 5 series for a small 35 acres farm I am starting up. I will be doing crops, hay and other little chores. I have already have a 1025r that will doing garden work and other little chores. What would you recommend for planting, disc, finishing and bay work
Thanks for the great video! I’m waiting on delivery of a new 4052R. I’m upgrading from a 3033R. The dealer will be adding liquid ballast to the rear tires. Among other things, the tractor will be used to move large round hay bales. My JD dealer claims I won’t need any additional rear ballast. I’m not sure I agree. I have a ballast box that I used on my 3R, but I’d like to get away from using that, if at all possible. What do you think?
Can you move large hay bales ok? I’m wanting 4044R but idk 🤷♂️ if can move large round hay bales
@@DavidFlores-du3rm yes, I move 5.5’ round bales with no problem. The tire ballast eliminated the need for a ballast box.
Courtney, I bought the brush guard screen you recommended in the video. One question, what the heck goes in the big hole in the center of the screen?
Haha, no idea to be honest with you!
Hi and good video and KEEP UP the good VIDEOS
Great video. Do I understand correctly that JD quick attach is not the same as skid steer quick attach mount?
Yeah they are different hook ups
Would be happy to buy and Beta test one of those prototype weight boxes on my 4052R in Alaska.
The pro of 3 pt weight is it unloads the front axle for loader work. If you routinely? Overload front axle you will effect seals. BTDT.
What are the part numbers for the led bulbs , the drop down arrow only has info for fundraiser ? Thank you 4066r
Thank you for all your valuable tips and information. I am looking to buy a John Deere series 4 tractor and want to ensure I trick it out to give me the best utilization. I am a subscriber and enjoy all your videos, you do talk fast so I really have to pay attention 😂😂. My question to you is, 1) do you ship to Canada and 2) do you have shipping points in the Montana area I could access? Again thank you for all the valuable information, all the best to you for 2023.
Great video! Looking into getting a John Deere 4066r. What is a price for a 4066r?I live in Southern California.
Good info! For clarification, a 4044M series with the 400E loader doesn’t have the hole for a mirror. You will have to find another solution for the mirror.
I love the line shuttle idea, just wish they used Dewalt, Milwaukee etc batteries and sold tool only
Thanks.
Can you post a link to the toolbox bracket? I can't seem to find a kit or the solo bracket and the link in description doesn't indicate if it has a bracket or just the $104 toolbox. I have a 4052R with cab and am sick of having stuff under my feet. Also - slick idea for the torq bar with the PVC plug. Buying a pair this weekend.
Nice stuff! Do they make a grill guard to fit the 1025R? I know this is a 4 series video, but good application for one on the 1,2 series etc. I've had (I'm sure others have too) some close calls with branches. thanks for sharing!
I found this guy on Ebay and Facebook. I gotta reach out to him to get more info still, but looks solid. www.ebay.com/itm/John-Deere-Grill-Guard-Brush-Guard-Insert-2025R-1025R-1023E-/303845200364
That looks good! Going to check that out
How much weight can the 4066r lift safely at 24 inches in front of the pins
Are there mirror options for the 3 series? I do not have those holes in the loader arms. And what size and price would I be looking at for a flail mower?
Can you recommend anything like the mirrors or other custom things for a 3038e? Also have you ever seen a conversion that you can use on a john deere quick attach to a pin attach on the front end loader? also thanks for all the great info and videos :)
I upgraded from a 4500 to a 4720. I always run with tire chains on the rear tires. Do you or your viewers favor tire chains ? I never see tractors with chains on the videos. Thanks !
On the hydraulic offset flail mower what sizes do offer, blade style and cost? Looking for around a 52” or so.
As usual, a great overview of the attachment options. There is a HLA snow pusher in my future! I have a 4066R and would like to add the same fender extensions as are on your machine. Where did you source yours?
Love your channel. I am a mahindra guy I have 2015, 2540. Would you be willing to do a comparison between a equivalent Mahindra and John Deere. I'm wondering how they. If I lived closer I would volunteer to bring mine out. The thing that really stilled me to Mahindra was no DPF or Def fluid to meet tier four requirements.
I've been watching your videos, trying to educate myself. I am torn between a 3R series or a 4R series. One implement that I would like to run is a front mount snowblower. The 4 series doesn't have a midmount PTO. Was wondering if it can still be run on a 4 series with the extra hyraulic hookups, ie the 3rd function option or some other manner. Sorry, newbie here. Thanks for any information.
🟢The 3046r cab Tractor is a BEAST.!!! Absolutely love mine.!!!🟢✴️✴️✴️✴️✴️✴️
What's the better toothbar piranha tooth or heavy hitch thanks for your time
Different designs, I couldn't pick a winner
@@GoodWorksTractors come on man you know which one do you use
Haha, well I use the Heavy Hitch :)
@@GoodWorksTractors do you guys carry them if so how much in Canadian funds thanks for your time
I have both on different tractors. They are both wonderful. It all comes down to if you like modifying your bucket or not. With the Heavy Hitch no modification needed.
I will say though with the Pirahna I have never felt the need to remove it. It is a permanent fixture to the bucket for me. With the Heavy Hitch I sometimes remove it for fine aggregate (sand, small base, etc.) work.
It really is a tough decision between the two. 🙂
Can the 4066R with a cab accommodate a backhoe attachment?
You are good great company why don't made tractor like kubota sunshine see the difference ❤❤❤❤❤❤❤❤
I have a question I seen a little tractor in the background of the implements that was an older very old I have interest in it what can you tell me about it
Sorry, but I'm using that one for future videos. Not interested in selling.
@@GoodWorksTractors thanks for the fast reply
We have a JD5075E with the 520M loader. Do you know if anyone makes a side tip bucket for it? It would be really useful for us, but I have had no luck finding one.
Looking for a 3 point hitch stump grinder for my JD 3033R, Could you quote me pricing on a Baumalight ,
I'm not going to use it other than for my personal property stump clearing for yard areas and field & path clearing ( I can pick it up at you place )
Thank you
pc
Howdy, please send an email for quotes. Thanks!
I’m not seeing the links....?....looking for the amazon links to the led lighting and toolbox
Select the drop down arrow that TH-cam makes almost impossible to see. There's a 4,000 word description hiding there with all the links. Thanks!
What about tie down points on the 4 series for when haul it? Any add ons ?
They have one built in tie down point on the front and loops by the receiver on the back. No add ons that I know of.
Why not spend a couple grand more and go with a Provonost cyclone blower, soild stainless steel or aluminum.
1st
Happy Saturday Buddy
Good morning gentlemen
🏆🎉🎇🙌🔥🚜👨🌾
@@SummertymeJamz Hello !!
I like the looks of The Tar River plow🚜
2nd
Morning sir!
1/2 again !!
Love your videos, so informative. Just wanted to let you know about WoodMaxx wood chippers. They can chip up to 9" with power feeder. I have one and love it.
Sales heads up! TH-cam John Deere farmers furious after extreme woke left activism. what the hell is wrong with management nowadays Jiminy crickets