Japanese KOMA!
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- ↓Short version!↓
• Tried to make spinning...
■Products & Cutting conditions :
①[J-Series : Extarnal turning]
Tool : JSDJ2CR1212X11
catalog.tungal...
Insert : DCGT11T302FN-JS SH725
catalog.tungal...
Vc = 130 m/min, f = 0.02 mm/rev
②[TungCut : Extarnal grooving]
Tool : JCTER1212X2T12
catalog.tungal...
Insert : DGS2-020 AH7025
catalog.tungal...
Vc = 130 m/min, f = 0.04 mm/rev
③[DuoJustCut : Parting off]
Tool : JSXXL1212X09
catalog.tungal...
Insert : JXPG16L20F SH725
catalog.tungal...
Vc = 126 m/min, f = 0.03 mm/rev
■Work material : Brass
■Machine : Automatic lathe
#cnc
#machine
#engineering
#technology
#tools
Very satisfying CNC machine
Thank you so much for your compliments! It means a lot to us to hear you say that!
•Length of external turning could be reduced where pre-grooving begins. At least higher feed rate on non visible area, 0.02 is really slow.
•Pre-grooving with 0.04… easily 3x on brass
•Why facing at parting off? You don’t need this surface for next part, only tip remains.
Is this CAM programming?