The way he’s driving the bike looks like „Trail“. Driving through the landscape not for speed, but to master difficult „scenes“. What you need there is a wide power band starting just above idle. Nothing this twin-engine had originally. A friend of mine had one and it was all about rev‘s. And then add an in any case to big turbocharger. The one used looks more like 2..3l displacement instead of 125ccm. But anyway, in the 70s, when I was in the „modify your small bike“ age, we did not the parts and machinery at all. If we would have got hands on a modern TIG welder! We used either electrode welders (and mainly closed holes we burned in before), or we sometimes could get hold on a gas welder to make nice 2stroke exhaust cones. Maybe that way we survived 🙃😎.
Germans are Asians and other foreign countries not as much America any more but still alittle cause America is 9n Russia's side and one Israel prime minister is siding Putin against Ukraine which was Germans ally since thirties so they are foreign countries mostly us too but not as much any more they give others permission and us too ones that want to be their allies you and I would have permission too you know they will there's some few hand full that are not for Putin
Nên làm 2 kênh ytb a à. Một bên là có giọng nói của a uo kênh dành cho người việt. còn kênh kia thì ko cần lòng tiếng dành cho người nước ngoài. Rất nhiều người làm như vậy a à 😊 chúc a thành công kênh ngày càng phát triển 👍
I just noticed this, but I think it would run better if you ran it as a draw through setup (carb before the turbo) instead of a blow through like you have it.
Nope, because then you need to change the Turbo Seals out. Other why's it sucks oil and makes a huge vacuum leak. He neeeds a fuel pump or a way to make a 1:1 Fuel pressure rise with boost.
@@trxtech3010 on a carb setup, a blow through requires pressurizing the carb to manifold pressure. its easier to do a draw through setup. It wont make the leak like youre claiming it will. and thats from first hand experience with draw through carbie turbo setups on vws increasing fuel pressure would just cause the float bowls to leak. What you actually have to do is pressurize the float bowls, but this doesn't work on all carb setups. I've seen some setups where the entire carb is contained within a pressure box
А четырёх цилиндровый можешь собрать? Это будет интересно тем что такой тип двигателя распространенный Я впервые вижу двухцилиндровый самодельный Это просто шикарно конечно дружище. Да и кстати ещё есть звук подобие спортивного мотоцикла даже на этих двух цилиндров, a 4х будет он абсолютно звук идентичен просто
Nghe tiếng máy thật sự rất là phê, có 1 số bình luận là ở tốc độ cao thì cái turbo xả áp như thế nào, và cái khoá nước là câu trả lời :3 Chúc anh luôn có nhiều sức khoẻ để có thể thoã mãn đam mê
The bracket for the shock should be mounted lower to load the shock up better as the back of the bike sits to low when you sit on it. Giá đỡ giảm xóc nên được lắp thấp hơn để chịu lực giảm xóc tốt hơn vì phần sau của xe đạp sẽ hạ xuống thấp khi bạn ngồi lên.
Le Dan your channel is great. One quick note though you need an oil pump to feed the turbo oil or does the turbo have its own built in pump that sucks the scavenged oil?
I believe that boss he welded and tapped was in a pressure passage to end feed the crank(see 11:19 & 13:27-13:42), and thus the turbo gets it also...@14:00 you can just make out a clear braided return line showing flow. Also as he puts on air cleaner, behind his hand 14:46-14:56 w/the white zip tie.
đây là một trong những kênh xe dc nước bạn quan tâm nhiều
I wish there were captions on this mans videos! That engine build is fantastic!
Bro same
There are, press the CC icon on the bottom right of the screen!
@@alexroca6981 Which is worthless except for [Um], So[Music] & [Applause]...
All your creations needs atleast a million views great work man 2 thumbs up from Philippines 🇵🇭
Muchas gracias mi amigo❤️❤️
Respect from Brasil,i never see 2 cylinder engine bmx...in Brasil only have a bmx with 1 cylinder,50cc,2 or 4 stroke...good job.
Hands down one of the best detailed video on youtube to do a custom build to a bike thank you!!!
Chế thêm chỗ đựng cục gạch vừa kê chân chống và cũng là công cụ hỗ trợ :)) , cảm ơn b vì đã mang lại nhiều video ý nghĩa
chế được như vậy là quá ok ..! tuy nhiên mình góp ý thêm cho bạn nên thêm gác chân kiểu moto và lắp thêm chắn bùng kèm hệ thống đèn nữa là ok ..!
This kid's got insane talent!!!!!! Awesome Ideas and ultra cool builds! Indian Larry would have liked your work..
The way he’s driving the bike looks like „Trail“. Driving through the landscape not for speed, but to master difficult „scenes“. What you need there is a wide power band starting just above idle. Nothing this twin-engine had originally. A friend of mine had one and it was all about rev‘s. And then add an in any case to big turbocharger. The one used looks more like 2..3l displacement instead of 125ccm.
But anyway, in the 70s, when I was in the „modify your small bike“ age, we did not the parts and machinery at all. If we would have got hands on a modern TIG welder! We used either electrode welders (and mainly closed holes we burned in before), or we sometimes could get hold on a gas welder to make nice 2stroke exhaust cones.
Maybe that way we survived 🙃😎.
Wow! Who gave you permission to build such an awesome bike?? I love it!!
if you dont run it in street ragularly, you dont need permission
Probably his mind
Germans are Asians and other foreign countries not as much America any more but still alittle cause America is 9n Russia's side and one Israel prime minister is siding Putin against Ukraine which was Germans ally since thirties so they are foreign countries mostly us too but not as much any more they give others permission and us too ones that want to be their allies you and I would have permission too you know they will there's some few hand full that are not for Putin
@@Jeremytran_18 it’s a metaphor lol
@@ball7411 it was 8 months ago lol, the time goes so fast 😂😂
Nên làm 2 kênh ytb a à. Một bên là có giọng nói của a uo kênh dành cho người việt. còn kênh kia thì ko cần lòng tiếng dành cho người nước ngoài. Rất nhiều người làm như vậy a à 😊 chúc a thành công kênh ngày càng phát triển 👍
Nếu kênh kia cũng gặp phải ng nước ngoài thì cũng vậy thôi.
p
chúc bạn sức khỏe, ra thêm clip hay
Thats pretty slick using the frame as the gas tank! For a minute I was like hold up where is the tank🤔
nghe máy nổ đã quá bạn ơi
Wow really awesome. Good job. RESPECT from the Netherlands 🇳🇱 💪💪
I wish I have the same skills and balls as this guy! Putting an engine to a BMX is dangerous enough.. and he put a friggin turbo in it! What a madlad!
I just noticed this, but I think it would run better if you ran it as a draw through setup (carb before the turbo) instead of a blow through like you have it.
Nope, because then you need to change the Turbo Seals out. Other why's it sucks oil and makes a huge vacuum leak. He neeeds a fuel pump or a way to make a 1:1 Fuel pressure rise with boost.
@@trxtech3010 on a carb setup, a blow through requires pressurizing the carb to manifold pressure. its easier to do a draw through setup. It wont make the leak like youre claiming it will. and thats from first hand experience with draw through carbie turbo setups on vws
increasing fuel pressure would just cause the float bowls to leak. What you actually have to do is pressurize the float bowls, but this doesn't work on all carb setups. I've seen some setups where the entire carb is contained within a pressure box
Hai đầu lòng mà thêm quả turbo nữa ,good job
Very cool. I want to do 2 cylinders. I'm from Thailand. ❤️🇹🇭🇹🇭
Sawadeekap
Great build no stone untouched man I would love to give you my Harley see where that goes 👍🤘🍀
Sound like benelli300😅
Awsssm👌
Ga ăng ti nghe như harley, còn lúc nẹt nghe như 4 máy quá đỉnh quá bác ơi
Hi om from indonesia, i also own a 2 cylinder wave 110, good job 👍🏼
Terima kasih a, dan orang Indonesia
Giá sao vạy ạ
Halo sobat. Saya juga dari Indonesia. Saya sangat suka projek 2 silinder
Nghe giống như xe 4 máy ,. Giống moto. Hay lắm anh ơi
Really nice build. Smart man.
Wow very nice 👍👍 from Philippines
Nên gắn intercooler nhé chủ kênh.
Đó là j ạ
@@Le_Dan làm mát khí trước khi vào họng hút.
@@Le_Dan à. sẵn cho mình xin link bán turbo dc k nè
@@phuongxamgsx bạn vào kênh Khắc Duy Vlog
Phát hiện :)))
Chúc anh luôn thành công 😊
Very creative. Nice work!
Cái này gọi là đỉnh của chóp.trong làng chế và binh xe
Great build! , bad brakes! 👍
Quá ngon , chắc liên hệ bạn làm 1 e như này quá👍👍👍👍
Great masterpiece ❤ Love from philippines ❤💪👉🇵🇭
One of the most American non American things I’ve seen! Hell yeah brother!
Quá đỉnh rồi anh ơi 👍
Cool burn out man i love it for a bmw with dirt tread or all terrain treaded tires with deep treads
Great work! Much appreciate from Indonesia🇮🇩
Mantap bosqu hadir dri Indonesia
With respect From PAKISTAN ! God job ! I had never seen 2 or 3 cylinder 4 and 2 stroke engine. I also want to convert my bike 2 cylinder in pakistan
❤️
Acompanho esse canal a algum tempo e sempre fico impressionado com suas construções, parabéns. Você é muito bom de serviço.
А четырёх цилиндровый можешь собрать? Это будет интересно тем что такой тип двигателя распространенный Я впервые вижу двухцилиндровый самодельный Это просто шикарно конечно дружище. Да и кстати ещё есть звук подобие спортивного мотоцикла даже на этих двух цилиндров, a 4х будет он абсолютно звук идентичен просто
A Dẫn chế đẳng cấp quá
Mừng anh trở lại... kênh kia bay màu mất tiêu 😢
Nghe tiếng máy thật sự rất là phê, có 1 số bình luận là ở tốc độ cao thì cái turbo xả áp như thế nào, và cái khoá nước là câu trả lời :3
Chúc anh luôn có nhiều sức khoẻ để có thể thoã mãn đam mê
Super awesome my buddy! Lot of power on that frame!
Gắn hai chân đứng cho người sau đứng như xe đạp . Và cắt hạ pô xuống chút cho đỡ nóng
Brilliant idea..nice workmanship... most amazing diy bike
Siêu phẩm được tạo rất đẹp việt nam giỏi quá
Such a great talented person.
WOW turbo charged cub.mx but no cooler so just go for a oversized airfilter ,, it's really cool greetings from Norway
respect from Tunisia 🇹🇳👌🤗 nice
Ja Man, great job!! Go ahead... Greetings from Germany, Munich...
Nice modification but i didnt saw the battery & fuel tank..👍😊
I think the fuel tank is in its own body.
a thợ good chóp tuyệt vời đỉnh nhất việt nam
this is a cool bike!👍
verry nice job.... ; )
Looks like you go all in with your handmade twin cylinder BMX bro 🥸
Oh i’m sorry i forgot about that turbo too 🔥🛸👽
Bang nawee, mau swap engine satria nya bang?
Xe tự chế chạy ngon vào rừng núi Pô SC là xóm ngon
Cool build. Is the frame the fuel tank?
That’s awsome I love the no fuel tank trick .
It would probably work better with the carburator on the turbo!
mong kênh phát triển a sẽ đc nổi tiếng
Nice build but the frame will bend sooner than later looks nice tho
Love you video from Philippines 🇵🇭🇵🇭🇵🇭🇵🇭
💖💖
Great, great build, except you put the top fork bearing race on backwards.
Exactly what I was thinking! Had to check the comments to see if I wasn’t the only one who saw that! Lol
Cantik kali suaranya bah,salam dari Indonesia
Guy has so much talent
The bicycle that makes world proud of it and him..
You set up a new channel ? No wonder ive got no up dates from you 🤣🤣 found you now 😁😁🤘🤘🤘🤘🤘
Very amazing skills . Beautiful bike 🙏🏼✨
RESPECT MAN FROM ATHENS GREECE...♠💥💥
bro can u make inline4 or 3 engien Love to see ur video's gr8 work🔥👌🇮🇳🇮🇳
hi.. I'm from Indonesia 🇲🇨👍👍, your idea is awesome..
Parabéns! Você é ninja demais!
sick bike man!
I love that sound 🙏
The bracket for the shock should be mounted lower to load the shock up better as the back of the bike sits to low when you sit on it.
Giá đỡ giảm xóc nên được lắp thấp hơn để chịu lực giảm xóc tốt hơn vì phần sau của xe đạp sẽ hạ xuống thấp khi bạn ngồi lên.
Beautiful Project ♥️
Nhà bạn có du đồ nghề máy móc luôn hả? Ngưỡng mộ bạn thiệt !
When the sc project exhaust more expensive than the bike itself
Wrwqur
hahaha nice build, love it
keep up 👍
I want an engine like that for my dirtbike
Good job brother... 👍
Làm máy L twin 2 đầu lòng 49cc đi anh ❤️
nice rear spring setup you got there
You are a genius !
Quá giỏi A ơi..
That is so cool I wish I had it
Cây pô huyền thoại quá. Mai mốt đưa vô viện bảo tàng đc rồi anh
Còn sài nhiều nữa e
Le Dan your channel is great. One quick note though you need an oil pump to feed the turbo oil or does the turbo have its own built in pump that sucks the scavenged oil?
I believe that boss he welded and tapped was in a pressure passage to end feed the crank(see 11:19 & 13:27-13:42), and thus the turbo gets it also...@14:00 you can just make out a clear braided return line showing flow. Also as he puts on air cleaner, behind his hand 14:46-14:56 w/the white zip tie.
You are really talented, keep it up
Would you mind sharing what kind of turbo charger are you using?
Quá giỏi! 👍👍👍
trais na alto giro pra nois vê se é braba msm
só se for pra quebrar o motor no primeiro role
saporra n bota pra andar n sei pra q 2 cilindro turbo kkkkkk agonia
Quá đẳng cấp bạn ơi
Hi.. I'm from Indonesia
Amazing..
Lúc nào bác làm thử cả supercharger và khí cười nữa
Could u show us the turbo works in the high speed?
when a homemade bmx sounds better than your motorcycle
ต
Where sis I get the oil feed for the turbo? Was it an external electric oil pump?… and how did U tune the carburator