You figured that out yet I know what’s up with it it’s a tiny middle bolt on the front of it. If it comes completely loose your whole clamp and a plastic thing in the middle will fall out.
Hello ! In advance thank you for the video. Could you please let me know what is the size of the puller ? m30x?? I am looking for information concerning thread pitch (m30x1.5 or m30x2 or m30x3?)
@@Mechanic0007 Thank you. The pitch of a lead screw is simply the distance (spacing) between adjacent threads. Please see at google how to measure - usually the entire parameter of the thread is represented as: EXAMPLE M30x1.5 what state 30mm of diameter and 1.5 mm pitch.
@@SCOOTERREPAIR-kf2fn Thank you for the comment and help ! However, my scooter has different size of the fork's threaded holes. After dimensioning and fitting couple of bolts: There is M32x2 if anybody else would like to know. There is no puller with this size on the market. Does yours is custom made ?
U are the Best i have s5 thanks for all
Where did you get those ratchets for the wheels?
Can you do rear suspension, also where to get the parts
Hi there i have joyor s10s abd do u know where i can buy parts if somethibg went wrong with mine im from united states.
thank you sir
I have a s10 s the adjustable handlebar it keeps going down when I ride. Any suggestions? And I did tighten the. Stem Quick Release Clamp to so…
You figured that out yet I know what’s up with it it’s a tiny middle bolt on the front of it. If it comes completely loose your whole clamp and a plastic thing in the middle will fall out.
Hallo, where can i get the special tool for the damper?
Hello. Please, is it possible to buy "the tool" somewhere? I will be changing the shock absorbers so im afraid i will need it.
Para el s10s se quita igual??
I don't care what anyone says these scooters are a deal for $700. They are built like a tank, it's an engineering marvel.
THANKS, i have a joyor s10s and i dont know how remove the motor
th-cam.com/video/dZiBNL87n9Y/w-d-xo.html
I have a s10 s electric scooter I need tires do you know somewhere that I can get tires off routing tires because I have street tires on it now
th-cam.com/video/wV0BxYZmt2M/w-d-xo.html
you need a special wrench. #18mm. you can handmake one
Hello !
In advance thank you for the video.
Could you please let me know what is the size of the puller ? m30x?? I am looking for information concerning
thread pitch (m30x1.5 or m30x2 or m30x3?)
The diameter of the large screw is 30mm is correct, but which size does 1.5/2/3 refer to?
@@Mechanic0007 Thank you. The pitch of a lead screw is simply the distance (spacing) between adjacent threads. Please see at google how to measure - usually the entire parameter of the thread is represented as: EXAMPLE M30x1.5 what state 30mm of diameter and 1.5 mm pitch.
@@Mechanic0007 I think it's 1.5, because I measured the value between 1.5-1.8, which is less than 2.0
@@SCOOTERREPAIR-kf2fn Thank you for the comment and help ! However, my scooter has different size of the fork's threaded holes. After dimensioning and fitting couple of bolts: There is M32x2 if anybody else would like to know. There is no puller with this size on the market. Does yours is custom made ?
@@kamilsabat4611 The factory gave it to me, I don't know if it is a special size