Been using a lot of cheaper guns, but finally decided to break out and spend a little cash on a really good clear gun. So early December, I will have a Supernova. Excited to try it out. Taking note of your settings here👍
Tomorrow will be my first time trying a SuperNova, I am a Sata man, but I been hearing a lot about WS400 I just had to buy on and give it a try. I have used there air brushes, what a nice brush they make. Thank you for the information now I have half the battle beat.
Got the LS400, gonna try that setup, i sprayed base at 27 psi and fluid out 2.75 turns and i didnt like the outcome, looked like uneven spray pattern... also did clear, same setting at 31psa and came out pretty nice..... thanks for the info.....
Mannnn i just ordered one. Should be here Friday. I'm anxious to use. Did you have any issues setting it. I'm getting feedback from ppl saying they couldn't set it properly
@@joeespinoza6995 yes sir i sure did...an amazing gun that's for sure. I went ahead and started a TH-cam channel as well. I'll be doing airbrushing tutorials and painting. Right now is just beginning videos. Would greatly appreciate it if you would go check me out n subscribe n like!!! I'll be using the ws400 in upcoming video spraying an f250 color change from pearl white to tuxedo black!!!
Thanks again for another informative video; straightforward and clear; I just bought a ws400 and will follow your lead on applying clear with your (recommended settings) I will" twik" as needed; thank you,PATRICK.P
I’m interested in the LS400 for base, I have a 60 gallon Quincy 2 stage 5hp 15.2 scfm @ 175 Idk what cfm at lower psi it’s not on the compressor and can’t find it even at Quincy Will my compressor be capable to keep up with the LS400 HVLP I keep hearing they’re air hogs I want to get your opinion before I get it. Great video keep them coming.. good work thanks
1st time i used the gun it was a water hose runs every where. Did you reduce wth activator ? by how much. Also my settings were ,Bottom wide open/fan wide open and 3.5 out from closed fort he fluid.29 psi
Thanks brother i just bought a ws400 hd 1.3 supernova im gonna try that set up im constantly getting orange peel i will try your method now can i use that setup in other sprat guns like devilbiss the iwata lph 400 and ws400 bellaria paint guns?
Hey for those who want to print this out i copied his transcript to copy and paste I hope you don`t mind so i have it in my book now. Perfect set up. I'm going to show you how just 2 Supernovas the LS 400 and the WS 400. LS 400 Paint Gun for sealer or clear Alright let's just get started alright guys first this is the one I use for paint this is a LS 400 it has a 1.3 needle nozzle combination and the way I adjusted it. Leave the air inlet wide open wide open because I use a regulator to control the air. Now for the trigger which is the fluid adjustment. I press this trigger all the way. The screw is opened all the way it's almost falling off I start closing it until the needle or the trigger starts moving a little bit as soon as I feel it moving I stop so it's a wide open. For the fan the fan I close it all the way up then I open it 2 turns and that's where I leave it and that is a perfect setting. For the paint the patterns going to be wide it's going to be nice and it's going to be consistent and even. Now for the air inlet I use a regulator for the paint. I’m going to use 29 to 30 psi that's for the paint and then I can use it for the sealer also and you can also use it for Clear. Alright now for the WS 400 Clear gun This is the clear gun remember the bottom one leave it wide open. don't move it leave it wide open. Now for the fluid I do the same thing the same thing I open it up all the way pull the trigger close it until the needle hits the trigger once I feel it moving, I stop. So, it's going to be wide open now. For the fan close it all the way up I open it one turn two turns and just a pinch more like not even a just a little bit more. I don't know if you can see it right there that that was two turns just a little bit more and that's going to be set up for the clear. Now on the regulator I usually go 35 psi for clear only not for the not for the paint. For the clear I go 35 psi I'm ready to shoot. It'll give shoot clear as smooth as it can be and I won't have any orange peel so that's the perfect setting for this and that's it guys that's how I set up these two guns I hope you guys learn something as to how to set up the supernovas they're real hard to set up I've messed with a bunch of little tweaks and turns and that's the perfect setting that I found out that works for me and hopefully it'll work for you.
At 35psi, fluid wide open, and fan turned out 2 and a Lil bit do you go thru a whole bunch of product? I set up my iwata to this, and I went thru 2qts of clear on some panels that should've NEVER used that much! What am I doing wrong?
Sorry to be offtopic but does anybody know a trick to get back into an instagram account?? I was stupid forgot my password. I appreciate any tips you can give me!
@Malik Brett thanks for your reply. I found the site on google and I'm in the hacking process atm. Seems to take a while so I will reply here later when my account password hopefully is recovered.
Pinte un fender blanco y la pintura me quedó como si fuera textura como bolitas muy pequeñas no se por qué no se si falto o sobro aire, como chinita la pintura, que abra fallado ?
Two questions 1 is 30 psi ls400 set up available for solvant base or only hydro base? 2 ls400 is vers régular not Bigger in thé midle : does it change the overlap méthod ?
Amigo tengo una iwata kiwami4 1.3mm puedo aplicar el clear también ? Ud. sabe cuánto es el CFM de esa pistola no encuentro la info. o la mínima compresión requerida para que funcione bien esa misma pistola. Gracias
Thanks for the information on setting these guns up. I have both and never gotten on with them as I am use to the devilbiss guns. Will try these settings now.
I have an Iwata Entech Supernova LS400 1.4 and wondered if you ever used that gun to clear coat? If not, how do you think it work for clear coating? I have been using my old W400 for clear coating for years and prices when up so major overspray is a waste of money nowadays. Love the channel and can't wait for a sticker to put on my tool box!👍
The LS was made specific for clear coating. They have other caps avail for shooting metallics, base coats but now it looks like they have the Entech / green knobs gold cap for shooting base coats. I will have to look in the parts breakout if they have similar-same caps for fine tuning but all the body guys here swear its the best gun to shoot clears using the high $$ stand ox clear coat. The first time I used it I was sold. I have used it to shoot both with no issues.
Awesome. I am actually going to purchase the ws 400 first thing in the morning. The guy at store told me though i could spray at lower psi. Could u give me little more advice? Also, Who did you buy yours from?
@@PHARRAWAY I painted a very small amount of my bumper with a cheap touch up gun 0.8 fluid tip and it came out dry rough looking I have since sold them going to get a ANI 160 Q MINI GUN I should have used my devibliss GTI PRO LiTE with 1 2 fluid tip and high flow hose and clear coat my new devibliss SRI PRO LITE THE GOLD ONE WITH THE TE 20 AIR CAP FOR THE CLEAR
Been using a lot of cheaper guns, but finally decided to break out and spend a little cash on a really good clear gun. So early December, I will have a Supernova. Excited to try it out. Taking note of your settings here👍
Thank you for taking the time to answer my question I really appreciate it!
Any time!
Hi. Great video! On the WS400. Can you use it for basecoat?
@@marcacastrocdtmcdentallabo9769 yes you can
30 psi and 35 for clear that's a bit high I've used them try about 22 for base and 25 for clear
Tomorrow will be my first time trying a SuperNova, I am a Sata man, but I been hearing a lot about WS400 I just had to buy on and give it a try. I have used there air brushes, what a nice brush they make. Thank you for the information now I have half the battle beat.
Have fun!
Muchas gracias por su aportación a la comunidad automotriz
Got the LS400, gonna try that setup, i sprayed base at 27 psi and fluid out 2.75 turns and i didnt like the outcome, looked like uneven spray pattern... also did clear, same setting at 31psa and came out pretty nice..... thanks for the info.....
Awesome
Just bought my ws400 and used yesterday.. just wow love it! Glass finish
Mannnn i just ordered one. Should be here Friday. I'm anxious to use. Did you have any issues setting it. I'm getting feedback from ppl saying they couldn't set it properly
@@creationzthruair834 did you get it
@@joeespinoza6995 yes sir i sure did...an amazing gun that's for sure. I went ahead and started a TH-cam channel as well. I'll be doing airbrushing tutorials and painting. Right now is just beginning videos. Would greatly appreciate it if you would go check me out n subscribe n like!!! I'll be using the ws400 in upcoming video spraying an f250 color change from pearl white to tuxedo black!!!
Thank you for the video. I just got my supernova and will give it a try with your settings.
Thanks again for another informative video; straightforward and clear; I just bought a ws400 and will follow your lead on applying clear with your (recommended settings) I will" twik" as needed; thank you,PATRICK.P
awesome brother
I’m interested in the LS400 for base, I have a 60 gallon Quincy 2 stage 5hp 15.2 scfm @ 175
Idk what cfm at lower psi it’s not on the compressor and can’t find it even at Quincy
Will my compressor be capable to keep up with the
LS400 HVLP I keep hearing they’re air hogs I want to get your opinion before I get it.
Great video keep them coming.. good work thanks
Thank you for sharing just got ws400 and FYI pro lite devilbiss not much experience all sharing is so awesome and welcoming
What size tip are you using on the clear gun? Also, what brand regulators are those?
For clear I have a 1.4 tip and the regulator is from iwata
1st time i used the gun it was a water hose runs every where. Did you reduce wth activator ? by how much. Also my settings were ,Bottom wide open/fan wide open and 3.5 out from closed fort he fluid.29 psi
Thanks brother i just bought a ws400 hd 1.3 supernova im gonna try that set up im constantly getting orange peel i will try your method now can i use that setup in other sprat guns like devilbiss the iwata lph 400 and ws400 bellaria paint guns?
I have a video showing how to set your guns to the right settings
This was perfect settings, came out glass. Thanks bro!
Thank you very much! I have been a SATA guy, but I need a new clear coat gun and was going to invest in an Iwata.
Hey for those who want to print this out i copied his transcript to copy and paste I hope you don`t mind so i have it in my book now. Perfect set up. I'm going to show you how just 2 Supernovas the LS 400 and the WS 400.
LS 400 Paint Gun for sealer or clear
Alright let's just get started alright guys first this is the
one I use for paint this is a LS 400 it has a 1.3 needle nozzle combination and
the way I adjusted it. Leave the air inlet wide open wide open because I
use a regulator to control the air. Now for the trigger which is the fluid adjustment.
I press this trigger all the way. The screw is opened all the way it's almost falling off I start closing it until the needle or the trigger starts moving a little bit as soon as I feel it moving I stop so it's a wide open. For the fan the fan I close it all the way up then I open it 2 turns and that's where I leave it and that is a perfect setting.
For the paint the patterns going to be wide it's going to be nice and it's going to be consistent and even.
Now for the air inlet I use a regulator for the paint. I’m going to use 29 to 30 psi that's for the paint and then I can use it for the sealer also and you can also use it for Clear.
Alright now for the WS 400 Clear gun
This is the clear gun remember the bottom one leave it wide open.
don't move it leave it wide open. Now for the fluid I do the same thing the
same thing I open it up all the way pull the trigger close it until the needle
hits the trigger once I feel it moving, I stop. So, it's going to be wide open now.
For the fan close it all the way up I open it one turn two turns and just a pinch more like not even a just a little bit more. I don't know if you can see it right there that that was two turns just a little bit more and that's going to be set up for the clear.
Now on the regulator I usually go 35 psi for clear only not for the not for the paint.
For the clear I go 35 psi I'm ready to shoot. It'll give shoot clear as smooth
as it can be and I won't have any orange peel so that's the perfect setting for this and that's it guys that's how I set up these two guns I hope you guys learn something as to how to set up the supernovas they're real hard to set up I've messed with a bunch of little tweaks and turns and that's the perfect setting that I found out that works for me and hopefully it'll work for you.
At 35psi, fluid wide open, and fan turned out 2 and a Lil bit do you go thru a whole bunch of product?
I set up my iwata to this, and I went thru 2qts of clear on some panels that should've NEVER used that much!
What am I doing wrong?
Thanks for the advice, I'm looking to get myself an LS400 for clearcoating ,thanks again for your info!
about how far are you from the tip to the panel when spraying?
4 to 5 in
Would you recommend these guns for painting motorcycles?
Yes
You can't go wrong with a Iwata ! 👍
Sorry to be offtopic but does anybody know a trick to get back into an instagram account??
I was stupid forgot my password. I appreciate any tips you can give me!
@Draven Omar Instablaster ;)
@Malik Brett thanks for your reply. I found the site on google and I'm in the hacking process atm.
Seems to take a while so I will reply here later when my account password hopefully is recovered.
@Malik Brett It did the trick and I actually got access to my account again. Im so happy!
Thank you so much you saved my account !
@Draven Omar you are welcome xD
Never tried one. Ships me one and let me shoot one with it. I'll send it back. Lol. Thanks for the videos man keeps me busy mentally.
Does the regulator have to be at the gun, or is it okay at the compressor? Are these settings okay for single stage ? Thanks for the videos!
It can be at the compressor but it's best at the gun and yes this settings are good for single stage
Good day can I use the supernover 1.3 to clear coat
LS should be at 26 PSI. it's 1.8psi or even better a little less. 30psi for the base it's a lot and the paint will be dry
Thanks for the tip
You a painter
Curious are you still using 1.3 for base coat
hes a good question the filter for the spray gun on you tube shows at the gun other shows you at the regulator
Is it true the ws400 and ls400 are the same gun? Just different engravings?
no the caps are a bit deterrent
Thank you so much.....I have the 2 guns...now I know how to adjust...thank you teacher..apreciated
Pinte un fender blanco y la pintura me quedó como si fuera textura como bolitas muy pequeñas no se por qué no se si falto o sobro aire, como chinita la pintura, que abra fallado ?
Falto aire
Two questions
1 is 30 psi ls400 set up available for solvant base or only hydro base?
2 ls400 is vers régular not Bigger in thé midle : does it change the overlap méthod ?
solvent base, no not at all
Ok I understand you Have a ls400 entech and you dont recomand to use it for a solvent base coat Isn it ?
Do you think I can use ws400 evo for the base coat?
Yes I have used it for base also
@@PHARRAWAY ok, thank you, I have Tekna clear coat and I ordered iwata for base coat, but I’m not sure wish one is but for base
@@rafaelleon2666 LS400 will be for base 1.3 tip
Thanks for the advice on settings.
Have a LS400 1.3 evotech due to be delivered in a couple of days Will try your settings.
Thanks
great video mate well explained about the settings fan and fluid there a great gun i have heard ..
Amigo tengo una iwata kiwami4 1.3mm puedo aplicar el clear también ? Ud. sabe cuánto es el CFM de esa pistola no encuentro la info. o la mínima compresión requerida para que funcione bien esa misma pistola. Gracias
Si amigo tambien se puede
Gracias x su ayuda 👍
Thanks for the information on setting these guns up. I have both and never gotten on with them as I am use to the devilbiss guns. Will try these settings now.
Awesome
@@PHARRAWAY will let you know how I get on.
Why does it look like your regulator has a quick coupler on top where it connects to gun as opposed to screwing it on?
yes it has
@@PHARRAWAY got a part #to that regulator?
@@PHARRAWAY or did you just add a coupler to top of it?
@@full_metal2452 no I will show the item next video
Hey what is that part number I want one
Hey can I use the iwata ls400 1.4 to clear coat.
Yes that is perfect
@@PHARRAWAY thanks bro. I have one but not get the best results. Will work on it an let u know
Some glossy Guns 😎BOSS
I have one what's air pressure I use 2k clear
I use 33psi
what difference there is with the normal ws 400 1.3 and the EVO 1.3?
To me there is not much difference
Great, gracias desde Puerto Rico
hey brotha which tip would u recommend 1.3 or 1.4 for clear im a new follower , thank u
for clear i'm going with 1.4
@@PHARRAWAY thank u 👍👍👍
Where do you buy it those guns I try to buy a iwata supernova ws400 ?
Hey man I like the video where did you get the supernova 2 bye
www.ebay.com/usr/spray_guns_and_spares?_trksid=p2047675.l2559
Is the ws400 clear guy a 1.3
Yes it's a 1.3
Those are some nice guns.
Thank You brother
Your video has helped me out big time cheers buddy
Glad to help
I have an Iwata Entech Supernova LS400 1.4 and wondered if you ever used that gun to clear coat? If not, how do you think it work for clear coating? I have been using my old W400 for clear coating for years and prices when up so major overspray is a waste of money nowadays. Love the channel and can't wait for a sticker to put on my tool box!👍
It's a awesome gun
The LS was made specific for clear coating. They have other caps avail for shooting metallics, base coats but now it looks like they have the Entech / green knobs gold cap for shooting base coats. I will have to look in the parts breakout if they have similar-same caps for fine tuning but all the body guys here swear its the best gun to shoot clears using the high $$ stand ox clear coat. The first time I used it I was sold. I have used it to shoot both with no issues.
Awesome. I am actually going to purchase the ws 400 first thing in the morning. The guy at store told me though i could spray at lower psi. Could u give me little more advice? Also, Who did you buy yours from?
I got mine on ebay i left a link on the description
What regulators are you using?
I'm in need of one.. Brand etc?
Thanks for your vid/help..
I own a Ls400 Supernova
It's an iwata regulator
Saludos maestro, tienes el video en español?
si lo estoy subiendo
Thanks well done and very well presented
Thank you for the video. What tip size is your ws400 evo?
1.3 tip
helpful thank u 🙌🏼
Nice bro...great info 💪🏾
Thanks, brother I loved your video also brother
How much cfm you need for them??
it needs about 8 to 9 cfm
So a 30-40 gallon compressor will work??
@@DonMajicJuan82 yes
no it's not true!!!! LS need 14 CFM and WS 12CFM or 425 and 375 l /min
Saludos Master🇲🇽
La exelente trabajo
La ws 400 que medida tiene
1.3.o 1.4???
Ya lo tienes el video en español???
Where is your shop located?
Texas
Gracias hermano
Buddy can you just IWATTA that does base and clear like a LS400 OR WS400 SUPER NOVA
Yes
@@PHARRAWAY I painted a very small amount of my bumper with a cheap touch up gun 0.8 fluid tip and it came out dry rough looking I have since sold them going to get a ANI 160 Q MINI GUN I should have used my devibliss GTI PRO LiTE with 1 2 fluid tip and high flow hose and clear coat my new devibliss SRI PRO LITE THE GOLD ONE WITH THE TE 20 AIR CAP FOR THE CLEAR
thumbs up
Thank you very well explained keep safe
Do I sense another giveaway?
lol, not yet
👍
Thanks man
👍✌
Anyone else hate this ls400 hvlp???I'm a gti pro lite fan but cannnnnnot get into the lower air
For some reason it won't go beyond 20 psi
I set them up different and have real good results.
awesome what is your setup? maybe I can try it
💦 🦍 💪🏻
what do you use for primer?
I use urekem brand
@@PHARRAWAY thanks for the quick reply
@@PHARRAWAY I can’t really find any info on the urekem here in the USA. Any other nice guns for primer you would recommend?
@@emmanuelmata lol you where talking about the gun? Lol I thought you ment the primer I use. You can go with the black widow by harbor freight 1.7