How to Change the Water Separator Fuel Filter on the Kubota SVL75-2
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- In this video we walk you though how to replace the water separator fuel filter on the Kubota SVL75-2. We have a guest who comes in to show you how easy it is. Learning to do filter changes on your Kubota can drastically reduce the cost of taking care of your equipment. We share this information with you to help spread knowledge. If you like the content that we produce like and subscribe.
Check out are Facebook: www.facebook.c...
Thank you guys great detailed video. Big help!
Glad it helped always happy to hear
Great video!
Great video! Very clear and informative, please make more content!
Thanks you! We have a ton on videos on the Kubota Skid. Check them out!
Thank you I appreciate your videos it made it much easier for me to do. Plus I saved A LOT of money!!
You are welcome! We are always trying to save our viewers money!
The oil filter wrench I had for my truck worked on my fuel filter AND my water separator. On the separator you have to place it near the top where it's thickest, make sure to slip the unplugged wire into the center of the filter wrench so it doesn't tear it.
You're supposed to open the vent screw on the top of the separator prior to draining fuel...
We are having the same problem, rough idle when idling down? I changed all my filters still having the issue. Did It work for you?
Thanks Jon
No it unfortunately didn’t I ended up taking it in and the pit in new injectors like I suspected from the beginning
Radiator should not be there in basic maintenance, other machines are much easier to service
What year is your machine? I have a 2020 with the same symptoms, I’m suspecting injectors.
Mines a 2019 and i did end up having new injectors put in it
@@SmallFarmGuys was it covered under warranty?
Yes they are under warranty for us! Sorry for the late response youtube doesn’t notify us for comments under existing comments.
Try this: pull the incoming fuel line off the water separator, it has a small clamp on the Γ nipple that's screwed into the separator and comes from the bottom up to the separator. Loosen the mounting bolt that connects the water separator to the frame, you can then unscrew the Γ nipple and check it for debris. I had a dead wasp in mine that was causing major fuel restrictions and limping at full load.
After my filter changes the thing wouldn't even start, the Γ connector that the fuel hose clamps onto is notoriously bad at getting clogged with trash and debris. Pull it off and make sure it's clear. I'd suggest looking up other ways to clear the fuel lines as well.
Also, apparently there's a "should be recall but not quite" on the fuel necks of these Kubotas, they're literally rusting prematurely and filling the tanks with debris. Some say this is attributing to injector failure so consider researching it more or replacing the fuel neck if you can. Pop your gas cap off and take a look.
What’s the filter number
The filter number is V0631-51880