I drove for like 1 year and few months without servo and it was a pain in the ass... After ordering the new relays for 13€ and doing everything you showed right here, it is working again and I can get another 2 year TÜV license! Thanks a lot!
Thank!! Great Video. Worked fine on my Punto 2001. It is not very easy to un solder the wires (a third hand may help), but saved me a lot of $$$. Thanks again
Hello, first of all thank you for sharing your solution for this problem. I am having the same issue in my Fiat Punto (year 2004). In my case, some times blocks and some times not, but last days is getting blocked more and more often. My doubt is if the solution that you explain in your videos works for my Punto version or not. I have readed in some forum comments that some versions of Punto have different servos... I didn't tried anything yet because I would like to be sure before. Thank you very much.
Hi, thank you for you comment. I think yes, wil be working on your car as well, but I think you have to buy a new different relay. First take servo off and check the number of relay. Buy on ebay a new one´s. remember, Always change both of them.
Hi, my power steering works fine but only the city servo button light is on. Turning the key (system test) does make the city servo red light in dash light up. But other than that, no respone by pressing the city servo button. Not when standing still nor when driving at whatever speed. Could this be related to the relay? Thanks for the video :)
Hello first thank you for sharing knowledge and the good welling. Second, Maybe it's stupid question. In my fiat punto 2 2001 model with same hard steering problem (I bought it like that old owner mentioned the issue). In my car I don't have city servo button. Is that signify that my car doesn't have the power steering motor at all or is it the same as your case but without city servo ? Thank you in advance
Hi, i have build electric car from fiat grande punto. I have a weird problem with servo. When everything is hook up on board computer my servo does not work, and all other things are working. But if i unplug cable from computer my servo is working fine but then my abs and some other things does not work.i have try to remove one by one wire from computer but eventhough if only one wire is connected servo is not working. Is there a way how to fix it? To start servo manually to be active? Weird situation when u give contact with key servo doesn't work but if all the wires are removed from board computer and u give contact servo is working fine :(
Hi,could you tell me which ones are the positive and negative cables?? I think in total are 9 cables,I would like to connect the motor direct to a car battery. Thank you very much
I have fiat punto 2001 and my relay is tyco v23072 c1061 x127 and not tyco v23072 c1061 a308. Somewhere i saw that those two should be compatible. I would like to know if 4117 is okay to use
Hello Thank you for the video, i have the same problem, and will give your video a shot. However, you lost me when installing the new relay, I must connect the wires again, eh ??
Dear +rohankebria = this is typicall issue of relays but can by issue also with connection between relays and PCB-board, Let´s say "cold" contact as picture in video 2:00 - 2.03 or One of the relay are not working properly. Typical relays issue - some times working and some times not ( they are sticket on the relay and shocks or different temperature in the night/ day can help to unstick). You need to change relay. Both of them for sure. They are not expensive. 1. Try to reconnect with iron soldering the conections of relays marked in video 2 min. If doesn ´t help you need use step 2. 2. Change relays.
you probably dont care at all but does anybody know of a trick to get back into an instagram account?? I was stupid lost my account password. I love any help you can offer me
@Harvey Jacoby i really appreciate your reply. I got to the site on google and im in the hacking process now. I see it takes quite some time so I will reply here later when my account password hopefully is recovered.
![ง้อ (ALRIGHT) - FOURTH [ TEASER ]](http://i.ytimg.com/vi/ya6MBfo-Wvg/mqdefault.jpg)
I drove for like 1 year and few months without servo and it was a pain in the ass... After ordering the new relays for 13€ and doing everything you showed right here, it is working again and I can get another 2 year TÜV license!
Thanks a lot!
Thank!! Great Video. Worked fine on my Punto 2001. It is not very easy to un solder the wires (a third hand may help), but saved me a lot of $$$. Thanks again
Thanks a lot for ur video.
Hello, first of all thank you for sharing your solution for this problem. I am having the same issue in my Fiat Punto (year 2004). In my case, some times blocks and some times not, but last days is getting blocked more and more often. My doubt is if the solution that you explain in your videos works for my Punto version or not. I have readed in some forum comments that some versions of Punto have different servos... I didn't tried anything yet because I would like to be sure before. Thank you very much.
Hi, thank you for you comment. I think yes, wil be working on your car as well, but I think you have to buy a new different relay. First take servo off and check the number of relay. Buy on ebay a new one´s. remember, Always change both of them.
Hi, my power steering works fine but only the city servo button light is on. Turning the key (system test) does make the city servo red light in dash light up. But other than that, no respone by pressing the city servo button. Not when standing still nor when driving at whatever speed. Could this be related to the relay? Thanks for the video :)
This is manual how to repair City servo by yourself. Any additional questions or if is not clear with anything please left comment. Thank you.
Why wiper controller relay goes off often
Hello mustafa, yes, wires must be connect back. Everything what you unconnected to take old relays off, must be connected back with a new relays.
Are you talking about the city-mode from Fiat? If yes, can you please explain a little how it actually works ? Technical speaking. Thanks
Hello first thank you for sharing knowledge and the good welling.
Second, Maybe it's stupid question. In my fiat punto 2 2001 model with same hard steering problem (I bought it like that old owner mentioned the issue).
In my car I don't have city servo button. Is that signify that my car doesn't have the power steering motor at all or is it the same as your case but without city servo ?
Thank you in advance
Hi, i have build electric car from fiat grande punto. I have a weird problem with servo. When everything is hook up on board computer my servo does not work, and all other things are working. But if i unplug cable from computer my servo is working fine but then my abs and some other things does not work.i have try to remove one by one wire from computer but eventhough if only one wire is connected servo is not working. Is there a way how to fix it? To start servo manually to be active? Weird situation when u give contact with key servo doesn't work but if all the wires are removed from board computer and u give contact servo is working fine :(
+bangalula have you correct rotor for this car?
Do it need re-calibrating ??
heel goede video , thanks
Great video! Thanks. Do you think these relays will work for a Panda 1.2 (year 2005) or will I need different ones?
I got the same problem with fiat panda 1.2 (year 2005). Did that got fixed?
Her er reperations anvisningen på din servostyring, jeg har bestilt to relæer, du skiller bare motoren ad so kommer jeg.
Hi,could you tell me which ones are the positive and negative cables??
I think in total are 9 cables,I would like to connect the motor direct to a car battery.
Thank you very much
You cannot do it. It is a stepper motor and switched by electronic means
Thank you
I have fiat punto 2001 and my relay is tyco v23072 c1061 x127 and not tyco v23072 c1061 a308. Somewhere i saw that those two should be compatible. I would like to know if 4117 is okay to use
Žan . basically principle of relays is the same. I think you can use 4117 as me.
Thank you :)
I changed my relay both but when you turn left stop working... Only left...
Will this work on fiat punto 2003 model and if so do you need different relays or the same you used in the video?
Mine is differend 2003, 188b. No relays on top. Servo with Service part 26103598 Displays REV 03A
Hello
Thank you for the video, i have the same problem, and will give your video a shot. However, you lost me when installing the new relay, I must connect the wires again, eh ??
No of course you don't have to reconnect the wires..
Hi, My city servo works some times in a week, what could me possible reason to this ?
do i need changing the RELAYS ?? or some other problem ?
thanks
Dear +rohankebria = this is typicall issue of relays but can by issue also with connection between relays and PCB-board, Let´s say "cold" contact as picture in video 2:00 - 2.03 or One of the relay are not working properly. Typical relays issue - some times working and some times not ( they are sticket on the relay and shocks or different temperature in the night/ day can help to unstick). You need to change relay. Both of them for sure. They are not expensive.
1. Try to reconnect with iron soldering the conections of relays marked in video 2 min. If doesn ´t help you need use step 2.
2. Change relays.
+Fiat Punto City servo Thanks for your response.
What do you mean by COLD JUNCTION ?
regards.
Where can I buy relays for my fiat pinto
il servosterzo in dotazione sulle vetture FIAT e FORD è di pessima qualità molto pericoloso perché tende a bloccarsi improvvisamente
Hi, Thanks for the video. Can I desolder the tin with normal welder?
Yes, I did it with normal welder.
you probably dont care at all but does anybody know of a trick to get back into an instagram account??
I was stupid lost my account password. I love any help you can offer me
@Draven Bryson Instablaster :)
@Harvey Jacoby i really appreciate your reply. I got to the site on google and im in the hacking process now.
I see it takes quite some time so I will reply here later when my account password hopefully is recovered.
@Harvey Jacoby It worked and I finally got access to my account again. I'm so happy:D
Thanks so much you saved my account!