Don’t forget the second most important alignment on your lifted truck and is over look, is your headlight beam pattern needs to be stock aim pattern. I bet you 90% of lifted trucks , owners don’t do it. Very bad on the eyes from both directions.
Most won't have a welder either so just buying the socket will be faster. Also 90 percent of new cv axles are one time use on the spindle side and needs to be replaced! Also on the new cv axles get cardon brand axles with any lift kit. There are longer flexible boots that will last longer
"...becoming the best-selling full-size half tonne import truck" IMPORT truck?! Huh??? Weren't the first Toyota Tundras built in Princeton, Indiana (then in 2009, Toyota moved the assembly to San Antonio, Texas)? If that is correct, how is it consider an "IMPORT" truck since it was/is build in the US. And many industry analyst even claims the Texas-built Toyota Tundras are the most American-made pickup truck. Oh wait,....is Powernation a Canadian production? I've always assumed it was a US based show. So the comment was "best import full-size truck" for Canada?
@@TrumpAmerica-2024 Maybe so, but they use more imported parts into each RAM compared to the Tundra. The Tundra has more US made products in it. Go research it.
I have a 2014 Tundra. I Installed a thorton brand tuning chip that plugs into the o b d port. It costs $89.00, and it adds 60 HP, & 5 extra MPG. I also missed calls a TRD Cold air intake from Toyota. It cost $260.00 with shipping.
Hahah 🏳️🌈 I have an 06 Toyota tundra 4.7 L lifted on fox coil lovers single bypass with fox shocks in the rear 18 inch rims and everything else is stock except for I have HID headlights. It has 319,000 miles Nothing except for tires breaks and a radiator has had to be removed. The AC blows cold there’s no restand the car passes smog every year. I hate to break it to you buddy, but LGBTQ has nothing to do with Toyota Toyota kicks, but everybody knows it.
Very helpful video! After watching, I knew it was time to just take it to the shop LOL.
Don’t forget the second most important alignment on your lifted truck and is over look, is your headlight beam pattern needs to be stock aim pattern. I bet you 90% of lifted trucks , owners don’t do it. Very bad on the eyes from both directions.
We don’t do it because some of our lifted trucks don’t have the headlight leveling switch.
Most won't have a welder either so just buying the socket will be faster. Also 90 percent of new cv axles are one time use on the spindle side and needs to be replaced! Also on the new cv axles get cardon brand axles with any lift kit. There are longer flexible boots that will last longer
Most don’t have any of these tools, or knowledgeable help, or 12 hours of free time, or a lift. Shop time!
Any lift kit over 4 inches is asking for CV joint issues later on these Tundras.
Not just Tundra.. but any independent front end. Too much angle.
Silver on knuckle isn’t to keep tires from hitting frame. It’s to keep the wheels from turning to much and tearing the hydraulic steering seals out
what is done with take off parts
You’re onto something here that’s smart
Holy hell. I saw another kit where the cross member doesnt have to be cut
I just bought this same truck with the upgrades done. 6 inch lift, 35 tires. Paid $2900 for it.
Very intelligent idea 💡, beautiful truck
Im all jacked up on Mountain Dew CHIP ! 🍟 😎 🤪 ....
I would love to have your garage
You couldn't have picked a better truck for the show...can I have it
🤡🤡🤡
"...becoming the best-selling full-size half tonne import truck" IMPORT truck?! Huh??? Weren't the first Toyota Tundras built in Princeton, Indiana (then in 2009, Toyota moved the assembly to San Antonio, Texas)? If that is correct, how is it consider an "IMPORT" truck since it was/is build in the US. And many industry analyst even claims the Texas-built Toyota Tundras are the most American-made pickup truck. Oh wait,....is Powernation a Canadian production? I've always assumed it was a US based show. So the comment was "best import full-size truck" for Canada?
tundras are ASSEMBLED in the US not made.
@@TrumpAmerica-2024 But they have more US made parts than RAM, F150, and Silverado.
@@HammerRocks Dodge Ram is manufactured and assembled in Warren, Michigan. Dodge has been leading in sales since the 2000's
@@HammerRocksmost of the parts including the frame come from mexico. gm's are built in mexico, fords are built in china.
@@TrumpAmerica-2024 Maybe so, but they use more imported parts into each RAM compared to the Tundra. The Tundra has more US made products in it. Go research it.
I have a 2014 Tundra. I Installed a thorton brand tuning chip that plugs into the o b d port. It costs $89.00, and it adds 60 HP, & 5 extra MPG. I also missed calls a TRD Cold air intake from Toyota. It cost $260.00 with shipping.
You got scammed on the tuning chip
No plug in obd is going to add 60hp and extra 5mpg. You got had. 😂
Why would you ruin that nice truck with that crap?
Young folks😒
I guess you got to entertain the LGBT guys as well with these worthless builds. You are at a loss I guess Powernation.
Hahah 🏳️🌈 I have an 06 Toyota tundra 4.7 L lifted on fox coil lovers single bypass with fox shocks in the rear 18 inch rims and everything else is stock except for I have HID headlights. It has 319,000 miles Nothing except for tires breaks and a radiator has had to be removed. The AC blows cold there’s no restand the car passes smog every year. I hate to break it to you buddy, but LGBTQ has nothing to do with Toyota Toyota kicks, but everybody knows it.
Sounds like Shane Martinez is projecting. Seek some help cupcake. Daddy Trump about to take office.