you can see well, it is necessary to sharpen the blade. thanks for the comment, if you have any tips to reduce the noise on the machine, your advice is welcome. greeting
Dear Million TV Team, I am naval architect, and I loved your wood peeler. So, I would like to design and build a very small version, because my principal hobby is to do wooden boats models, and it is hard to find veneer wood in different thicknesses here. Could you help me by giving me more mechanicals details, specially speeds and chain transmition reduction. I understand wooded log rotation speed must be regulated with the knife cutter speed. My idea is to do a no more than 200 mm width cutter, actually a very mini desktop peeler. Many thanks for your expected answer.
sure, more detail i will send you over the coming weekend (even images if you need it) email me on milantransaction@gmail.com and dont forget to subscribe, like and share to your social media . we stay in touch
sir, thank you for your comment. i'm not sure about your question, but next time when i visit place where am record this machine i will do a close up look and take a picture on cutting blade from a few diferent position and sent to you on your email. thats will be in next few days. thanks.
@@karanjeetsingh7100 literally yesterday when I was next to the machine I measured with a spirit level and the heights are as I wrote before, completely aligned in the spirit level.
pozdrav i vama, uopste ne proizvodimo ljustilice, ali sve sto vas zanima a vezano za iste i sto budem bio u mogucnosti da vam pomognem tu sam pa pitajte sta god da treba.
@@millionTv01 i think the machine frame is strong enough, but the shaper blade mount looks too thinn. need some thicker metal there, or bracing, and itt will cutt mutch better and more silent
Lo siento, pero no hay otro país que produzca este tipo de máquina, somos una microfábrica con solo unas pocas personas ubicadas en Serbia. Le deseo todo lo mejor señor. @@macariogarcia9139
![[ TEASER ] เงาะป่า - วงL.กฮ. | TMG RECORD](http://i.ytimg.com/vi/M4ObdFfcPww/mqdefault.jpg)
Where to buy one
Serbia
Шикарный станок! 👍
Благодарность
Сайн тодорхой харуулсанд баярлалаа.👍👍👍👍
Сэтгэгдэл бичсэнд баярлалаа, хэрэв танд өөр зүйл сонирхож байвал хэлээрэй :)
Хороший аппарат. Молодцы
спасибо, приятелю
Good job.
thank you sir
Thanks a lot for the video bro🥰
you welcome, share and like :D
That's awesome!
Thanks!
Nice share and best like
Thanks for visiting
Sangat penting untuk saya jika anda beritahu, 30 diameter berapa panjang boleh dapat 😊 dan berapa tebal mm plywood itu
awesome
thank you
🖒🖒🖒💪💪
*L i k e* V I D E O
💯
thank you, like, share and subscribe for more :)
Hello, congratulations for this machine and I would like to know where we can buy it and how much it costs. Thank you
thank you.! it’s handmade machine, you can buy in Serbia, craft cost about 3000eu, final price is about 4000eu + customs and transport to you.
seems pretty rough and leaving a lot of marks
you can see well, it is necessary to sharpen the blade. thanks for the comment, if you have any tips to reduce the noise on the machine, your advice is welcome. greeting
احسنتم
Dear Million TV Team, I am naval architect, and I loved your wood peeler. So, I would like to design and build a very small version, because my principal hobby is to do wooden boats models, and it is hard to find veneer wood in different thicknesses here. Could you help me by giving me more mechanicals details, specially speeds and chain transmition reduction. I understand wooded log rotation speed must be regulated with the knife cutter speed. My idea is to do a no more than 200 mm width cutter, actually a very mini desktop peeler. Many thanks for your expected answer.
sure, more detail i will send you over the coming weekend (even images if you need it) email me on milantransaction@gmail.com and dont forget to subscribe, like and share to your social media . we stay in touch
@@millionTv01 Many thanks in advnace for you appreciated information and images you will send.
How much power does the motor use? Have you ever tried to peel hard wood?
three-phase motor, 7.5kw power, I also tried hardwood but it is not smoothly peeled. thanks for your comment, cheers!
అన్న మెచైన్ తో ఎంత కాస్ట్ అవుతుంది అన్న ఎక్కడ దొరుకుతుంది చెప్పారా
నేను మీకు ఎలా సహాయం చేయగలను సార్?
Hello sir.. very good video.. can anyone tell what is the level of cutting blade ??
It is set equal/ below/above the centre of spindle ??
sir, thank you for your comment. i'm not sure about your question, but next time when i visit place where am record this machine i will do a close up look and take a picture on cutting blade from a few diferent position and sent to you on your email. thats will be in next few days. thanks.
@@millionTv01 thanks sir..
blade is set equal with center of spindle.
@@millionTv01
Thanks sir..
But someone suggested me here in India that the blade should be 2 or 3 mm higher than the center of spindle.
@@karanjeetsingh7100 literally yesterday when I was next to the machine I measured with a spirit level and the heights are as I wrote before, completely aligned in the spirit level.
Cek harga lokasi dimana❤
What do you do with the strips of wood? Do you sell them or do you make things with them
make things, see other videos
Sy minat beli mesin ini
terima kasih atas komentarnya
very nice how much is this machine?
About 4000 eu + shiping and customs costs.
Where can but this mashine admin
machinebis located in Serbia. thank you
Serbia balkan local where buy the mashine thank you
Pozdrav, zanima me proizvodite li ljuštilice u komercijalne svrhe, tj. prodajete li ih, upit iz Hrvatske.
pozdrav i vama, uopste ne proizvodimo ljustilice, ali sve sto vas zanima a vezano za iste i sto budem bio u mogucnosti da vam pomognem tu sam pa pitajte sta god da treba.
@@millionTv01 dobar dan
Ja sam zainteresiran za ovu masinu
Da li je prodajete i koja je cijena
Hvala
Da li moze broj telefona
Hvala
What is the price of this machine?
about 4k euros
What is your locații in Serbia?
@@margoigabriel6081 Serbia(south), Leskovac (city)
The machine is new or second hand? What weight does it have?
@@margoigabriel6081 its used, second hand
Harga mesin nya berapa itu
3000€
well built machine but not enough rigid. you can see the the surface cut and hear the sound
you are right, you have excellent hearing. do you have any suggestion?
@@millionTv01 i think the machine frame is strong enough, but the shaper blade mount looks too thinn. need some thicker metal there, or bracing, and itt will cutt mutch better and more silent
@@Domonkos89 trust me, i will take your suggestion into consideration. thank you again. all the best!
@@Domonkos89 we were actually thinking of speeding up the machine to remove the noise.? but your suggestion also makes sense.
@@millionTv01 its hard to fing the real problem, from just the video but i hope it will help for you :) all best and luck
Info lanjut unt mesin tsbt dimana
semua informasi ada di saluran millionTv
th-cam.com/video/31KH_H-FTeg/w-d-xo.html
Donde puede uno ackirir una makina de esas
serbia, 5k euro
@@millionTv01 👍algun otro pais k lo tenga lo mas cerca a mexico si puede darme esa info gracias
Lo siento, pero no hay otro país que produzca este tipo de máquina, somos una microfábrica con solo unas pocas personas ubicadas en Serbia. Le deseo todo lo mejor señor.
@@macariogarcia9139
Cek lokasi dan harga
4k euro, Serbia
Want to buy, so give some more ditails
ask for every detail and i will provide you answer.
@@millionTv01
where are you from..?
Me from India..
@@shurhiuziekhru2330 Serbia
How much ihe machine
0
cheap
🤔👍✊
Is this machine still available for sale?
Can you send me a contact for a discussion?
its available, 5k euro, Serbia
Saya ingin bertanya kepada anda
can you give me contact of the manufacture?
no more machines, thank you!
Berapa harganys
5000 usd$
А в чем он шикарный? Линейки нет. Этото не шпон
да, это шпон, но он из необработанного тополя
4r we$as 5 ta
? thank you for comment!