STARK TL 7500 -ROAD DRAG
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- The STARK TL 7500 Road drag is designed for road shaping, removal of sets of holes and edging.
The Road drag is agile thanks to the model-protected swivel tire pack, which also enables crab control, ie dog walking. Thanks to this, soft roads can also be cared for on the road, when it is possible to keep the base machine in the middle of the road. The swivel tire pack is also agile on narrow roads and tight bends, where the outer curve of the road can be swept with a single pull. The roadway is also easy to reverse and turn. The tire pack seals the surface of the paved road, giving a high-quality and dust-free finish.
All main blades are lifted and tilted in a single motion, making the road easy to use and precise to adjust, as well as safe when the driver can focus on driving. The road can be dragged to the desired slope over the entire width of the lane with the help of a slope meter. Additional width is provided by the side blade and crab control.
The road makes a good mark, the sand and gravel flow evenly thanks to well-designed blade angles (sweeping speed 10… 12 km / h). The coarse spreader is at a sufficient angle and the blade is high enough to ensure good leveling of the material on the road, large support wheels ensure a smooth work pattern. Oversized hydraulic cylinders ensure precise adjustment of all blades while saving hydraulic hoses and ‑components due to low hydraulic pressure.
Thanks to the sufficient blade angles, the Road drag is light to pull, reducing fuel consumption and enabling the use of a smaller base machine. The operating costs of the pin blades are low and the maintenance of the blades is easy because the blades rise high enough from the ground.
Safety is increased by the ease of use of the roadway and good attention lights (LED flashing lights) as well as attention-colored fender. Thanks to the fender, the Road grader also stays clean. The optimal diameter of the tire pack gives good visibility to the surface already lined behind and at the same time the surface pressure of the tire pack is maximized.
The optional side blade enables the treatment of road edges, ie the removal of chamfers, allowing rainwater to drain into the ditch without hindrance. Radio control allows the operation of all functions (accessories) and the adequacy of the basemachine’s hydraulic functions with a single controller. Hydraulic adjustment of the roughing spreader is also available, which also allows adjustment while driving.
THE ADVANTAGES OF THIS DESIGN:
The ability to work with the packer turned to the right is important when working on roads with softened edges / shoulders, as the tractor then moves closer to the center of the road. High mobility on narrow dirt roads and in tight corners, thanks to the same rotating packer. Alignment in one pass of the outer radius of the road in a tight bend. Convenience when reversing and turning. The packer compacts the surface of the road to be leveled, ensuring high strip quality and dust-free performance.
OPTIONAL EQUIPMENT:
Hydraulic side blade for negative curb leveling. This further directs water from the curb into the ditch. Radio control system for all grader functions from a wireless remote control in the operator's cab. Hydraulic vertical adjustment of the grading wing support wheels - adjustment on the fly.
How much does this cost to purchase?
Hello. Thank You for your interest.. Please send mail to pauli.smolander@stark.fi