This is going to be a widely researched topic among the Plex community next year when a lot of older hardware lose Windows 10 updates next year and don't have official Windows 11 support.
I decided a couple years ago Win 10 would be my last Windows OS. I ended up switching about 6 months ago. I got tired of them trying to make me use their other products. I'd uninstall Edge and they would put it back. Removed Cortana from the task bar and it came back. They'd nag me about getting an MS online account. I had to install Windows offline to have a local account. I wanted an OS not an advertising platform. Linux hasn't been perfect but it's been worth it!
Great video. That little NUC box is looking more and more attractive. I have a massive gaming PC running 24/7 for Plex and I probably only use it a couple of times a week. I am not sure how much power my PC is using at idle but I bet I could save some energy by switching to the smaller PC.
I can confirm Plex 4K HDR to SDR transcode works fine in Windows 10 Pro with latest Nivdia GPUs. I'm currently using MSI GEFORCE GTX 1660 ARMOR 6G OC. Thank you
I picked up the GMKTec N100 and installed Windows 11 to try out Plex Media Server on it. I have an RS3618XS Synology NAS with all of my media files and it has been running as my Plex media server for a year. I chose it because of the CPU power. I now use the N100 as my Plex media server and my NAS just for media files. It works just fine, even with high bitrate and DTS HD soundtracks. Runs about the same speed as the Xeon processor in the RS3618XS. Transcoding (hardware) works great with 3 streams running concurrently. The N100 also uses its NIC for transcoding! The N100 is too slow to operate as a Plex media player, however. I use Remote Desktop from my main PC to access the N100 which stays powered on 24/7. I'm selling the RS3618XS and replacing it with a DS1821+. Just swap the drives. Great upgrade and I save $1000!
Loved that you covered this, thanks! The only other thing that would’ve been helpful for me would be instructions on how you got the computer to boot onto the other drive to install Linux.
Thanks Lon! I've been running a Plex DVR server on a ZimaBoard under Windows 10, without any problems so far. But, switching to Linux is appealing to me. So, now that I have some inspiration, I'm going to give it a shot. 😁
Great video I've been running Emby on Ubuntu LTS for a few years now. The main part of the configuration is creating mount points and setting permissions to connect back to my Windows file server. Eventaully I plan on moving everything over to Docker.
Thanx for the video. Took mee about 2 hours to get this going on Ubuntu 24. Worked well will just take a bit of getting used to . Streams OK to my TV via the Plex Android app via my Chromecast.
This was a wonderful tutorial for a Linux noob like myself. Would you mind making a video explaining how to add Plex within Docker on Ubuntu since you mentioned that would be your preferred method?
I have been running Plex Media Server on a Windows 10 with no problem. Erased the drive and installed Linux. As long as the media was attached to the USB ports it worked properly. But I have 2 different spinning drives on my PC which hold my data. I spent several days trying to resolve permission problems I gave up and loaded Windows 11 and of course it worked properly . I have been running various Linux flavors for many years but am not that proficient with making changes via the terminal.
An N100 box like this running a lightweight Linux distro like Debian with Docker and Jellyfin, PiHole, etc., containers will be popular for home server users shortly.
I've got piles of DVDs from years past, a Synology, and some time. What do people use to copy DVDs they own to a file they can stream over Plex? There seems to be a lot of discussion of how many apps refuse to do anything due to copy protection. Some burn files but not to what can be read. I spent a lot of time making files then trying to convert them to a usable format mkv or whatever. Linux and Windows whatever works but most things I tried only did half what was needed.
@@Charles0511 I had tried MakeMKV but for some reason it wouldn't work I thought maybe copy protection issues? I tried again and it worked I used Emby instead of Plex. Video of the file looks skewed but seems OK when streamed to the TV.
Lon could you do a Plex with a Docker install in Windows on N100 unit? I watched your other video with a Linux install with Plex but the GMKTec I bought has Windows 11 on it and I am not familiar with LInux or Ubuntu. Thanks!
I wonder if you could add a guide at some point for accessing a NAS on Plex on Linux. I am having a heck of a time finding my Synology NAS to add my media files in Ubuntu. Guides I am seeing say I need to mount the drive through the command line but I am not seeing a very good guide anywhere for how to do this easily. In Windows this takes 10 second through the GUI.
I use NFS and mount the NAS, but SMB also works. You need to turn either protocol on in the Synology control panel anyway, I just use NFS because it worked long before SMB was a thing and it's native to Linux (and is a less chatty protocol). Either will work just fine. Just Google "NFS mount Ubuntu" or "SMB mount Ubuntu" and you can find some easy directions.
You would make a share on the synology (SMB or NFS) then mount it on the linux box. Test it out then add the mount to the /etc/fstab and point Plex libraries at that mount point.
I believe HDR tone mapping is now working for tigerlake and newer cpus (includes N100) on Windows 11. May want to do a video to test this. Would love to see!
Thanks for this. I am going to have to move my 2 Plex servers to Linux due to them not being able to go to Windows 11. My 2 run perfectly on the Precision T1700's I have so I see no need to get new machines for 11, which I am not a fan of anyway. I will do my MakeMKV on my Mac Mini. I appreciate the walk-through.
This is a great vidhow do the other apps work with plex like removing the commercials from TV shows And convert it to more favorable videos.Formats like I can do in windows
The N100 can't keep up trying to transcode DTS:X audio down to PCM. I've tried. Can't do it. It's not fast enough. The 4K video can direct stream, but the audio can't be transcoded fast enough.
@@cruiserusa Well...originally, I wanted to actually buy a trio of Mini PCs that had the Intel N305 processor in it, but at the time that I was looking to make the purchase, none were available. (Tried looking for the Minisforum UN305(C) and to no avail. The N100s were available, but didn't pass the $/(performance/Watt) metric, so that's how I ended up with a trio of OASLOA Mini PCs that has the N95 processor in it instead.)
Hello! Just installed a Beelink EQ13 (N100) w/ 16GB RAM running on Kubuntu. Supposedly, Quicksync should work. When I try running ffmpeg to test transcoding/encoding, my CPU keeps hitting over 120% up to 400%.. Is this normal? Would this be resolved by the Plex Server itself? I was trying to decode a 2160P/HEVC 5.1 Main 10 video to 1080p
I have Plex server running on a Ubuntu 22.04 LXC. The CPU is Ryzen 5900x and the GPU is Intel Arc A380. HDR Tone Mapping doesn't work for me. I installed Jellyfin on the same LXC and HDR tone mapping works fine. I think Plex has compatibility issues with Intel Arc cards maybe.
Could be the kernel drivers for i915/Arc. The newest TrueNas Scale is using 6.6.29 which has broken tone mapping. The bug is in the 6.6.26 to .30 and fixed with 6.6.31.
Excellent very informative video. I set up a lex server on a GMKTec G3 and it works fine except I dislike Windows 11. I was going to install Windows 10 but based on your video I bought a $20 2242 SATA M.2 and will give ubuntu(which looks more like Windows 10 than Windows 11 does) a try. The size, cost, and performance of the little N100 system just blows my mind. Perhaps I'm easy but I'm impressed with the engineering at both Intel and GMKTtec. I'm would also be interested in an unraid Plex video on the same hardware.
These little PCs are amazing for how little they cost. I suspect Intel could push this low end stuff even further but hold back in order to prevent cannibalizing their more expensive processors.
Lon, did you install Ubuntu as a subsystem on a Windows 11 mini-PC (I think W11 comes installed on most mini-PCs)? Or did you wipe a previous (possibly Windows) install and start from scratch? I'm wondering because I don't know if the Plex Linux-based advantages still exist if it's built as a Windows subsystem, and I was hoping you could tell me if Plex still works better with Linux as a Windows subsystem or not.
The installation will wipe the drive and install Linux of your choice. You can always re-install Windows back on there if need be. Another way is to buy another SSD and replace the one inside the mini. ..I recommend Linux Mint, works more like Windows, easy transition.
Do these gmktek mini PCs come with their w11pro OEM? I don't want to wipe out windows for Linux only to lose my w11pro license. Maybe running HyperV on w11pro to spin up an Ubuntu VM might be a better choice?
That external drive is formatted exfat, that's why there are no permission issues :) If you're not automating things with the arrs, using package managed version installed is fine. One of the big advantages of containers (docker) is avoiding dependency & library hell when different software might need different versions of things like python or java. You should think about doing a video on truenas scale when they make the switch away from helm/kubernetes to docker-compose. Right now, for the majority of users, their charts are basically no different from snaps. You have to have a LOT of knowledge to do anything yourself. That will change this fall!
Ahh forgot about the exFAT issue as to why this worked so seamlessly :). Thanks for the tip on Truenas - I'll keep an eye on it! I was looking for the simplest free turn-key solution so this is where I landed. Everything else requires a lot of extra work :).
@@LonSeidman Lots of projects out there that try to make things as turnkey as synology boxes, but they aren't quite turnkey. TrueNas Scale is currently using helm/k3s and would like to be turnkey but IME it hasn't been. With 20+ years of linux and systems support, I was able to handle the issues. Can't imagine what someone new to linux would do when confronted with a new OS plus the templating/orchestration of helm/kubernetes for issues. With their change to docker-compose, all of the complexity mostly goes away so you can understand what's going on.
Running plex direct on synology nas works better than using docker on top of synology. Now Ubuntu server docker and portainer works great also ! just my 2 cents ....
How does the N100 have the power to transcode ? Does it use the CPU rather than a GPU ? The Raspberry Pi 4 cannot transcode as the CPU is too poor and has no GPU
I wonder if there is anything similar to Diet-pi OS for mini PC like this? Diet-PI does require the command line but it's very easy and lightweight. You can install programs like Plex from the command line. That's how I started using Plex and Home Assistant in the first place. It basically uses Docker containers but all the Docker images are optimized. It's an awesome OS and does all the hard stuff like permissions for you. EDIT: I think Diet-PI will run on this.
@@DarthV506 Yes but the cool part of Diet-pi for beginners is you can run a single command then select what you want to install from a list. Stuff like Plex, FreshRSS, Nextcloud, Docker, and Portainer. Lots to choose from. It's way more complicated to use any standard builds of Linux headless. It's even easy then using a Linux desktop in many ways.
@@jmr Lots of issues when something goes wrong. You're not learning how it all works. I'd rather learn how it works, then I can fix it when something breaks!
@@DarthV506 It's a good OS for people that just want to get things done and it can be a great learning platform. I like to tinker and fix things but not everyone has the time.
Hey Lon.... I ran into something yesterday while trying to help my in-laws. They are not tech savvy, and Comcast customers. The Plex app is available for the cable box, but does not have access to media. Could you possibly share some insight? Thanks.
At work, they're starting to swap out some of the regular pc's with those GMTek G2's. They have Windows 11 Pro. You have me wondering if the key/install is legit. How could it be so cheap with a real Windows Pro license?
The key is legit. I have installed a new SSD and done a fresh install of Windows 11 via the media creation tool, and no problems. The only problem is that the media created has no drivers for the ethernet or wifi hardware. Easy work around is to use a $20 USB gigabit ethernet device to load Windows 11 so you can then install the drivers you need. No "this copy of Windows needs to be activated" desktop logo, just a legit copy of Windows 11 pro direct from Microsoft rather than China. The Intel ethernet drivers and Realtek Wi-Fi drivers are easy to find.
Looks like they're retailing for about $140, which is $50 less than the cost of a Windows 11 Pro license. The bigger concern is the malware some of these NUCs from unknown brands come with. That and a lack of drivers/support would drive me toward buying HP or Dell machines if I were buying machines for business.
@@stemlator I just wiped the SSD and used the media creation tool (straight from Microsoft) to install a fresh Windows 11 pro image. It's legit, no activation required (the key is in non-volatile memory). I actually purchased a new SSD so I could swap between the two testing Plex under Windows and Linux. Any modern machine with UEFI bios stores the license key in non-volatile memory (that means anything less than approximately 15 years old).
So from what I gather they are buying legit OEM licenses for these PCs which cost a lot less than retail. Although I suspect the ones they are buying are not supposed to be distributed in this way.
Hi! Since Plex seems to break all feedback loops with their customers. You are my only hope to knock at them. There are two use cases they seem to ignore that would help them to succeed. First and most important. They needed to implement separation of transcoders from storage. That would introduce the concept of the Plex cluster. I've got a Shield Pro which is a superb transcoder, but poor storage and I've got a medium NAS that is superb storage but mediocre transcoder and Shield is not the best thing to have reliable WiFi connection. So most of my library is on NAS but I need to mount it to Shield to enjoy faster start and better quality but all that fails if Shield connection fails. And I have to have a separate library setup on NAS as fallback. This is an annoying setup. Plex should build the way to join libraries on different servers and ability to use transcoder of one server and storage of the other. Second feature is more straightforward. They introduced Home theater as a separate application but that application is lacking the Download feature. They need to include that as I find myself using more that app on my Laptop and Steam Deck over Desktop and being mobile makes Download a must have. Thank you for the great content!
Its called UBuntu. I don;t know where UMbuntu comes from? As an educator, you should pay attention to how you pronounce things. Imagine being a maths teacher and teaching kids 2+2 = 7.
This is going to be a widely researched topic among the Plex community next year when a lot of older hardware lose Windows 10 updates next year and don't have official Windows 11 support.
Also those leaving Windows for Linux due to Recall.
I decided a couple years ago Win 10 would be my last Windows OS. I ended up switching about 6 months ago. I got tired of them trying to make me use their other products. I'd uninstall Edge and they would put it back. Removed Cortana from the task bar and it came back. They'd nag me about getting an MS online account. I had to install Windows offline to have a local account. I wanted an OS not an advertising platform. Linux hasn't been perfect but it's been worth it!
Awesome! 🎉 thank you very much for this new option.
Thank you for support!
Great video. That little NUC box is looking more and more attractive. I have a massive gaming PC running 24/7 for Plex and I probably only use it a couple of times a week. I am not sure how much power my PC is using at idle but I bet I could save some energy by switching to the smaller PC.
Not very efficient CPU probably running at 74 watts and the power supply 700 watts LOL Waste of energy.
Love the Plex content, keep it up!
I can confirm Plex 4K HDR to SDR transcode works fine in Windows 10 Pro with latest Nivdia GPUs. I'm currently using MSI GEFORCE GTX 1660 ARMOR 6G OC. Thank you
Yes Nvidia GPUs have been on the list for awhile but if you're using an Intel Quicksync based device Linux is the only way to go right now.
@@LonSeidman Yes I agree with you. As I heard Intel QuickSync can do more transcodes with less resources. Thank you for your great explanation.
I picked up the GMKTec N100 and installed Windows 11 to try out Plex Media Server on it. I have an RS3618XS Synology NAS with all of my media files and it has been running as my Plex media server for a year. I chose it because of the CPU power. I now use the N100 as my Plex media server and my NAS just for media files. It works just fine, even with high bitrate and DTS HD soundtracks. Runs about the same speed as the Xeon processor in the RS3618XS. Transcoding (hardware) works great with 3 streams running concurrently. The N100 also uses its NIC for transcoding! The N100 is too slow to operate as a Plex media player, however. I use Remote Desktop from my main PC to access the N100 which stays powered on 24/7. I'm selling the RS3618XS and replacing it with a DS1821+. Just swap the drives. Great upgrade and I save $1000!
Loved that you covered this, thanks! The only other thing that would’ve been helpful for me would be instructions on how you got the computer to boot onto the other drive to install Linux.
Thanks Lon! I've been running a Plex DVR server on a ZimaBoard under Windows 10, without any problems so far. But, switching to Linux is appealing to me. So, now that I have some inspiration, I'm going to give it a shot. 😁
Thanks for doing this one, Lon! As always, it was very well done. But it was also just what I was looking for. Thanks, again.👍
Great video I've been running Emby on Ubuntu LTS for a few years now. The main part of the configuration is creating mount points and setting permissions to connect back to my Windows file server. Eventaully I plan on moving everything over to Docker.
Thanx for the video. Took mee about 2 hours to get this going on Ubuntu 24. Worked well will just take a bit of getting used to . Streams OK to my TV via the Plex Android app via my Chromecast.
i would suggest using Mobile data wen testing the outside home feature to verify gor certain that it works outside home
This was a wonderful tutorial for a Linux noob like myself. Would you mind making a video explaining how to add Plex within Docker on Ubuntu since you mentioned that would be your preferred method?
I have been running Plex Media Server on a Windows 10 with no problem. Erased the drive and installed Linux. As long as the media was attached to the USB ports it worked properly. But I have 2 different spinning drives on my PC which hold my data. I spent several days trying to resolve permission problems I gave up and loaded Windows 11 and of course it worked properly . I have been running various Linux flavors for many years but am not that proficient with making changes via the terminal.
Thanks!
Thank you!!
An N100 box like this running a lightweight Linux distro like Debian with Docker and Jellyfin, PiHole, etc., containers will be popular for home server users shortly.
Thanks so much for this video Lon!
Lon , Thanks for posting this video
I've got piles of DVDs from years past, a Synology, and some time. What do people use to copy DVDs they own to a file they can stream over Plex?
There seems to be a lot of discussion of how many apps refuse to do anything due to copy protection. Some burn files but not to what can be read. I spent a lot of time making files then trying to convert them to a usable format mkv or whatever. Linux and Windows whatever works but most things I tried only did half what was needed.
MakeMkV
@@Charles0511 I had tried MakeMKV but for some reason it wouldn't work I thought maybe copy protection issues? I tried again and it worked I used Emby instead of Plex. Video of the file looks skewed but seems OK when streamed to the TV.
VLC is easy to use and works great.
Lon could you do a Plex with a Docker install in Windows on N100 unit? I watched your other video with a Linux install with Plex but the GMKTec I bought has Windows 11 on it and I am not familiar with LInux or Ubuntu. Thanks!
I wonder if you could add a guide at some point for accessing a NAS on Plex on Linux. I am having a heck of a time finding my Synology NAS to add my media files in Ubuntu. Guides I am seeing say I need to mount the drive through the command line but I am not seeing a very good guide anywhere for how to do this easily. In Windows this takes 10 second through the GUI.
How do you mount your synology nas to the n100 running Ubuntu server so you can access your media
I use NFS and mount the NAS, but SMB also works. You need to turn either protocol on in the Synology control panel anyway, I just use NFS because it worked long before SMB was a thing and it's native to Linux (and is a less chatty protocol). Either will work just fine. Just Google "NFS mount Ubuntu" or "SMB mount Ubuntu" and you can find some easy directions.
You would make a share on the synology (SMB or NFS) then mount it on the linux box. Test it out then add the mount to the /etc/fstab and point Plex libraries at that mount point.
I believe HDR tone mapping is now working for tigerlake and newer cpus (includes N100) on Windows 11. May want to do a video to test this. Would love to see!
Yes I just heard about that! We'll take a look soon.
Thanks for this. I am going to have to move my 2 Plex servers to Linux due to them not being able to go to Windows 11. My 2 run perfectly on the Precision T1700's I have so I see no need to get new machines for 11, which I am not a fan of anyway. I will do my MakeMKV on my Mac Mini. I appreciate the walk-through.
This is a great vidhow do the other apps work with plex like removing the commercials from TV shows And convert it to more favorable videos.Formats like I can do in windows
Hi, thanks for You vídeo! Could u tell me where did u buy the m2 sata? Thank u one more time!
The N100 can't keep up trying to transcode DTS:X audio down to PCM.
I've tried. Can't do it.
It's not fast enough.
The 4K video can direct stream, but the audio can't be transcoded fast enough.
Good point. We would need more 4K tests to see a complete picture.
so now what? N200?
@@cruiserusa
Well...originally, I wanted to actually buy a trio of Mini PCs that had the Intel N305 processor in it, but at the time that I was looking to make the purchase, none were available.
(Tried looking for the Minisforum UN305(C) and to no avail. The N100s were available, but didn't pass the $/(performance/Watt) metric, so that's how I ended up with a trio of OASLOA Mini PCs that has the N95 processor in it instead.)
Hello! Just installed a Beelink EQ13 (N100) w/ 16GB RAM running on Kubuntu. Supposedly, Quicksync should work. When I try running ffmpeg to test transcoding/encoding, my CPU keeps hitting over 120% up to 400%.. Is this normal? Would this be resolved by the Plex Server itself?
I was trying to decode a 2160P/HEVC 5.1 Main 10 video to 1080p
i am not be able to find the drive weather i attatch with sata port or usb
Can you do it with Jellyfin? And could you should how to set it up?
does linux have a screen magnifier for the blind? does this version of linux have remote desktop?
How would I do this if I have a Synology NAS? Is it possible to connect via USB? I'm not familiar with Linux if that matters
How does this device compare to using a NVDIA Shield as Plex server? Which is better?
I have Plex server running on a Ubuntu 22.04 LXC. The CPU is Ryzen 5900x and the GPU is Intel Arc A380. HDR Tone Mapping doesn't work for me. I installed Jellyfin on the same LXC and HDR tone mapping works fine. I think Plex has compatibility issues with Intel Arc cards maybe.
Could be the kernel drivers for i915/Arc. The newest TrueNas Scale is using 6.6.29 which has broken tone mapping. The bug is in the 6.6.26 to .30 and fixed with 6.6.31.
@@DarthV506 I'm at kernel 6.8.8 (Proxmox). I'm reading that a lot of Linux users using Intel Arc reporting the same thing.
@@pr0jectSkyneT Not sure what kernels are available to ubuntu 22.04.
can you set the HW transcoder to Intel Quicksync manualy??
Yes.
I’m planning something similar with OMV and Jellyfin
Excellent very informative video. I set up a lex server on a GMKTec G3 and it works fine except I dislike Windows 11. I was going to install Windows 10 but based on your video I bought a $20 2242 SATA M.2 and will give ubuntu(which looks more like Windows 10 than Windows 11 does) a try. The size, cost, and performance of the little N100 system just blows my mind. Perhaps I'm easy but I'm impressed with the engineering at both Intel and GMKTtec. I'm would also be interested in an unraid Plex video on the same hardware.
These little PCs are amazing for how little they cost. I suspect Intel could push this low end stuff even further but hold back in order to prevent cannibalizing their more expensive processors.
I am trying to find the right 2242 sata m2. Could u tell me a brand or link!? Thanks so much
You mentioned a video on making Plex accessible remotely with a VPN? I’m having a hard time finding that video.
Lon, did you install Ubuntu as a subsystem on a Windows 11 mini-PC (I think W11 comes installed on most mini-PCs)? Or did you wipe a previous (possibly Windows) install and start from scratch? I'm wondering because I don't know if the Plex Linux-based advantages still exist if it's built as a Windows subsystem, and I was hoping you could tell me if Plex still works better with Linux as a Windows subsystem or not.
The installation will wipe the drive and install Linux of your choice. You can always re-install Windows back on there if need be. Another way is to buy another SSD and replace the one inside the mini. ..I recommend Linux Mint, works more like Windows, easy transition.
@ thanks for the suggestions! I do have an extra SSD. Hadn’t heard of mint but will check that out. Thanks again.
Do these gmktek mini PCs come with their w11pro OEM? I don't want to wipe out windows for Linux only to lose my w11pro license. Maybe running HyperV on w11pro to spin up an Ubuntu VM might be a better choice?
That external drive is formatted exfat, that's why there are no permission issues :)
If you're not automating things with the arrs, using package managed version installed is fine. One of the big advantages of containers (docker) is avoiding dependency & library hell when different software might need different versions of things like python or java.
You should think about doing a video on truenas scale when they make the switch away from helm/kubernetes to docker-compose. Right now, for the majority of users, their charts are basically no different from snaps. You have to have a LOT of knowledge to do anything yourself. That will change this fall!
Ahh forgot about the exFAT issue as to why this worked so seamlessly :). Thanks for the tip on Truenas - I'll keep an eye on it! I was looking for the simplest free turn-key solution so this is where I landed. Everything else requires a lot of extra work :).
@@LonSeidman Lots of projects out there that try to make things as turnkey as synology boxes, but they aren't quite turnkey. TrueNas Scale is currently using helm/k3s and would like to be turnkey but IME it hasn't been. With 20+ years of linux and systems support, I was able to handle the issues. Can't imagine what someone new to linux would do when confronted with a new OS plus the templating/orchestration of helm/kubernetes for issues.
With their change to docker-compose, all of the complexity mostly goes away so you can understand what's going on.
Is there a way to give plex support a suggestion?
Running plex direct on synology nas works better than using docker on top of synology. Now Ubuntu server docker and portainer works great also ! just my 2 cents ....
Do you recommend the G3 or G5
How does the N100 have the power to transcode ? Does it use the CPU rather than a GPU ? The Raspberry Pi 4 cannot transcode as the CPU is too poor and has no GPU
It has hardware accelerated video transcoders built into the chip.
I wonder if there is anything similar to Diet-pi OS for mini PC like this? Diet-PI does require the command line but it's very easy and lightweight. You can install programs like Plex from the command line. That's how I started using Plex and Home Assistant in the first place. It basically uses Docker containers but all the Docker images are optimized. It's an awesome OS and does all the hard stuff like permissions for you.
EDIT: I think Diet-PI will run on this.
Really depends if you need the GUI. Ubuntu Server LTS defaults to only installing the basics.
@@DarthV506 Yes but the cool part of Diet-pi for beginners is you can run a single command then select what you want to install from a list. Stuff like Plex, FreshRSS, Nextcloud, Docker, and Portainer. Lots to choose from. It's way more complicated to use any standard builds of Linux headless. It's even easy then using a Linux desktop in many ways.
@@jmr Lots of issues when something goes wrong. You're not learning how it all works. I'd rather learn how it works, then I can fix it when something breaks!
@@DarthV506 It's a good OS for people that just want to get things done and it can be a great learning platform. I like to tinker and fix things but not everyone has the time.
Let's how Jellyfin runs on it. I am thinking about trying it out myself, but my PC i use as a server is older.
If you’re looking for Jellyfin content, Lon doesn’t do it. Tried commenting about it a few times, to no avail
Hey Lon....
I ran into something yesterday while trying to help my in-laws. They are not tech savvy, and Comcast customers. The Plex app is available for the cable box, but does not have access to media. Could you possibly share some insight? Thanks.
I suspect the Plex app on Comcast is just for the free streaming shows.
@@LonSeidman well that's crazy. Lol. Probably a rights issue.. Thanks for the reply.
At work, they're starting to swap out some of the regular pc's with those GMTek G2's. They have Windows 11 Pro. You have me wondering if the key/install is legit. How could it be so cheap with a real Windows Pro license?
The key is legit. I have installed a new SSD and done a fresh install of Windows 11 via the media creation tool, and no problems. The only problem is that the media created has no drivers for the ethernet or wifi hardware. Easy work around is to use a $20 USB gigabit ethernet device to load Windows 11 so you can then install the drivers you need. No "this copy of Windows needs to be activated" desktop logo, just a legit copy of Windows 11 pro direct from Microsoft rather than China. The Intel ethernet drivers and Realtek Wi-Fi drivers are easy to find.
Looks like they're retailing for about $140, which is $50 less than the cost of a Windows 11 Pro license. The bigger concern is the malware some of these NUCs from unknown brands come with. That and a lack of drivers/support would drive me toward buying HP or Dell machines if I were buying machines for business.
@@stemlator my feelings exactly
@@stemlator I just wiped the SSD and used the media creation tool (straight from Microsoft) to install a fresh Windows 11 pro image. It's legit, no activation required (the key is in non-volatile memory). I actually purchased a new SSD so I could swap between the two testing Plex under Windows and Linux. Any modern machine with UEFI bios stores the license key in non-volatile memory (that means anything less than approximately 15 years old).
So from what I gather they are buying legit OEM licenses for these PCs which cost a lot less than retail. Although I suspect the ones they are buying are not supposed to be distributed in this way.
Incredible on linux
Hi! Since Plex seems to break all feedback loops with their customers. You are my only hope to knock at them. There are two use cases they seem to ignore that would help them to succeed. First and most important. They needed to implement separation of transcoders from storage. That would introduce the concept of the Plex cluster. I've got a Shield Pro which is a superb transcoder, but poor storage and I've got a medium NAS that is superb storage but mediocre transcoder and Shield is not the best thing to have reliable WiFi connection. So most of my library is on NAS but I need to mount it to Shield to enjoy faster start and better quality but all that fails if Shield connection fails. And I have to have a separate library setup on NAS as fallback. This is an annoying setup. Plex should build the way to join libraries on different servers and ability to use transcoder of one server and storage of the other.
Second feature is more straightforward. They introduced Home theater as a separate application but that application is lacking the Download feature. They need to include that as I find myself using more that app on my Laptop and Steam Deck over Desktop and being mobile makes Download a must have.
Thank you for the great content!
Maybe a linux based surveillance camera system would have lower hardware requirements
Why doesn't windows allow this? Can Mac computers hardware tyranscode?
You know what goes well with Plex on Linux? mergerfs ;-)
❤❤❤
I love unbuntu.
You should be able to show a few seconds of video without audio, not full screen, and be within the fair use rules.
The length of the video shown is not what makes it fair use - it's the use itself. And this wouldn't constitute a fair use.
If your Mini pc has a SSD made by Netac, it WILL die after about 1 year!
Unfortunately all of this has changed and none of this works at all now. Plex is dead.
Its called UBuntu. I don;t know where UMbuntu comes from? As an educator, you should pay attention to how you pronounce things. Imagine being a maths teacher and teaching kids 2+2 = 7.
Jellyfin is better than plex