ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- Winding STRING DOUBLE-HEADED WEED EATERS is a simple process, but it can be a bit tricky if you're not familiar with the steps. To start, you'll need to purchase the correct type of trimmer line for your trimmer head, as different models require different types of string.
Once you have the right trimmer line, remove the cap from the trimmer head and locate the spool inside. Unwind any old string that is still on the spool, and clean out any debris or grass clippings that may have accumulated inside.
Next, cut a length of trimmer line that is appropriate for your trimmer head. Most trimmer heads require around 10-15 feet of line. Look for the line-feeding arrows on the spool, and follow them to determine which direction to wind the line.
Insert the end of the line into the hole on the spool, and begin winding it in the direction indicated by the arrows. Be sure to wind the line tightly and evenly, and keep it as level as possible on the spool to prevent tangles.
Once you have wound the line around the spool, leave a few inches of line free and tuck them into the notches on the spool. Then, replace the cap on the trimmer head and tighten it securely.
With the new line in place, your trimmer is ready to tackle your yard work with ease. Be sure to keep extra trimmer line on hand, as it can wear down quickly when in use, and may need to be replaced frequently.
I,ve successfully destroyed a trimmer,when I tried to change the cable !😂
🤣how that
😂. FROM SPAIN
@@kjell-akeapell3285 bonjour Madame Monsieur je souhaiterais publier un commentaire et quelques photos comment faire ???
how bro xD
So far best instructions on how to replace a two cable spool. Well done.
Thanx
Si pero siempre muestran cabezal enorme deberían ensenar cabezal para 2 milímetros que no tiene nada que ver con este
I made one by one and it wasn't easy.
Now, I know the right technic !
Merci beaucoup !!!!
👍👍👍👍👍👍👍👍👍👍👏👏
🙂
You know I’m late to the party but Geez I straight up missed the train on this one , wish I knew this 30+ yrs ago !!!! Thank you
c'è chi ancora non lo sa fare.
Et c'est bien ainsi,
Et c'est mieux comme ça.
This solved my problem, and I am grateful for posting this vid. Ty
Thank the Lord! It’s not only the best video it’s the only one I have found that tells how to do a double bump with no arrows or holes!!!! Thank You
Thank you for watching
Not even use a word
God bless my men
Thank you for this video! It's not just a time but also a life saver 😅💪
Good, right to the point, and bonus western quick draw music to boot.
Thank you! You helped us figure it out.
Song is a banger
Ce frumos explicat și arătat , foarte simplu de pus acel fir , eu merg pe fir de oțel , și este ok 🙋
Sin una palabra pero bien claro 👍🏽
Thank you so perfect exactly what I needed!!!! You utter gem!!! ❤
👍👍👍 Merci pour se bon rappel bien utile✅ 🤝👋
Thank you for watching
Best video i found. Thank u ❤
Depuis le temps que je le faisait mal ! Merci !
Très bien montré😊😊
You saved my marriage
🤣
You didn't say whether that was a good thing or a bad thing
WELL DONE & SPOT ON ,
THANKS FOR THE VIDEO !!!!!!!!!
Thank you for waching🙂
Thanks!!!!
thank you
Nice! Finally able to restring. Thanks!
Thank you for watching
Thank you
Straight to the point! Excellent video.
Dude thank you so much lol. I ain't retarded but I was like uhhhh...and there is ZERO instructions in the manual. Been forever since I've threaded a head, I used a separate head for the longest time that didn't thread like normal
Yes. There are many types of heads and coils. BR🙂
The fact they don't put this in the instructions manuals is infuriating and downright moronic
Chez les humains il existe aussi beaucoup de têtes différentes, mais tu peux toutes les enfiler de la même manière....
Et t'as pas besoin de manuel..
Nice edit!
Díkec... je více způsobu a já hledal přesně tento .. :)
This was the video that helped me finally get it right
Wieder etwas gelernt, danke !
Thank you for waching
Once upon a time...before bump heads...stringing was easy and one manually advanced the string. Today, I remove the cutter and manually advance the string. I have learned nothing...
Thanks! Makes it so simple
Change the title to how to string double headed weed eaters. Everything on TH-cam about Hyper Tough weed eaters only explains about single strings. I accidentally found this good video.
I listened to you and changed the title. Thanks for watching.
Hat er fein gemacht.😅😅
Your a wizard 🧙♂️ harry !
Thank you so much for this video! 👍 Now i understand how i should do this on my trimmer if its the same method on all trimmers? By the way, what's the song called?
Song is from AI, and yes, theres are many diferent ways.
thank you sir, you saved me so much time!
Great line music 👏
I did it 😅 Thank you so much
ocupa 1 modificación,x ke la bobina del enrrollado suelta el nylon cuando el bottón recibe algún golpe😢,y atraza el trabajo😮
Excellent video
Appreciate the video. Thank you!
Bruh that’s so much faster. Thanks so much🙏🙏🙏
So satisfying,
Bravo. chissà se ci riuscirò. non ho manualità.
Thanks for such an easy short video. Helped put jaja.
Thank you!
Thank you so much!!!
It was very stressful.
Not any more
What’s the song?
Thanks, you just saved me hours
Wonder what is the biggest diameter line that would work in this trimmer ?
I think 1.3mm
Keeps flying out...
Wrap it tighter
Winding line on THAT trimmer head lots of different kinds and ways
Yes, crazy
Łał to mi nowość
Nigdy sznurka nie nawijałem,tylko żyłkę.😅😅😅
Husqvarna heads are the best
Hate stihl ones
I put a t35 universal on my stihl fs110. Works really good
Moi je déteste les gens qui déteste et qui ne savent pas pourquoi ils détestent, c'est juste pour faire leurs intéressants,
Ca se trouve ils n'ont jamais eu une tête rotofils dans les mains.
Did you cut the notch in the center rib?
No, the notch already exists.
thanks
Oh my God thank you so much. I felt dumb for not knowing 😂
Merci, c'est vrai que c'est galère, mais Il faut trouver une autre solution pour les coupes bordures, on répand du plastique partout
Thank you for waching
Omg tyvm
merci
After watching this video I think I know how to do it now because after I string that it started using it that a line kept on coming out without bumping it only Allah videos did not tell you nothing besides this one
Husqvarna😊
Belinya dimana
That is one type of head unit, what about all the others?
You have video on channel with 2 diferent types
Has anyone had the bump actually work?
Can someone please tell me why the string of my string trimmer keeps coming off and also it all goes all the way in as well !??
You may have lost the spring inside🙂
@12 feet of line ?
Ci voleva un genio per capire come avvolgere il filo?
Many peoples dont know😜
Nobody teached me how to load the wire.
I loaded this wire on a few type of sistem.
Nic novýho
T35 trimmer line for dummies.
I like the music whos it by?
AI
Thanks a lot . I got mine 2nd hand and didn't know how to load a double. Thanks to you, know I do!
Tako ja namotavam strunu na glavu od Denzel trimera,Stihl malo drugačije
Zalosno da postoji ko zna koliko vrsta, isto ka i punjaca za mob prije.
Imam tri trimera Denzel,vilager,stihl svi drugačije glave
Thought it was commonly known
Nie sznurke tylko żyłkę
To jest film ,,Jak nie nawijać linki do koszenia na bęben"
What is the song?
AI
AI
Any chance that you can upload the song please? Thank you!
So that’s how you do it… huh
PAN MAREK PEKNY SLNECNY DEN 🇨🇿🤝🇸🇰
Следующее видео будет... Как подойти к триммеру...
Hahhaah, thank you🙂
🤝
Danke sehr!!!!👉🍻🍻🍻
👍🏼
Co to jest "sznurka"?
What is zmurka?
J'ai un enrouleur automatique.
Pluh 🗣️
Mahalo
Pluhh
И что? Все 15 метров намотал? 😂😂😂
3 max
Kind of unrelated question but how on earth can they charge tax on rain water drainage.
Simple🙂
Храни Господь этого мужчину!!!! Спасибо!!!!
Qu'est-ce que Dieu vient faire la dedans ???
das weis jeder der mit Freischneidern zu tun hat,.
Sweet video, but man get some better string. Life is too short for bullshit trimmer string lol
Lako je na husqarni namotat
Ума хватило!
Just get a speed feed head lmao
Сенсей, епта
Ho vent'anni che lo lo uso 😂
Gibt schon längst bessere Fadenköpfe die man nicht zerlegen muss zum Faden nachfüllen.
Throw it in the garbage & buy a speed feed head. Thank me later.
.....falscher Faden......