Thanks for the upload. This is happening with my 2008 Cobalt. We've replaced the valve, because we were getting the "Valve stuck open" code, but this explains how the water got into the pump. I'll be working on trying to replace the pump and hose now, and hope the new valve is working well enough to not cause the issue again.
Right on man. Great video. Thanks for the straight up, no non-sense video. Keep em coming. I am working on my 1999 Jeep Grand Cherokee. 2nd. gen. WJ. This might just do it, seems like I have done everything else. Thanks.
Thank u! 06 vibe gt p2441 code. Secondary air injection pump/valve. Between this vid and the others showing it being replaced i got a good understanding of what this is all about and how to fix it right. Thx again
Ok so my pump was working on my 99” suburban just fine at cold start up . It was sucking air though the (Inlet) port just fine . After power washing the engine bay and avoiding this unit I even put a rag in the inlet to avoid water after that it would not operate? Soon after it coded p0410 Today it is working but intermittently working and it it does it now (sputters ) air out of the inlet insure it pulling in through the inlet ? Any ideas
does a 2007 chevy colorado have this part? i am getting a p2431 and the part is called the secondary air injection system, but its not this part its all metal. is this the smog
thanx bud i have a 2004 chevy trailblazer 4.2 vortec will try fuse first , but if fuse went i think i get the new check valve and pump havent looked yet to see if hard to put in i'll be doing that now , ty
2008 Trailblazer. I replaced the pump and the check valve. Hoses are in good shape. Checked fuses and relays and they are in good working order. Engine check light will come on and then go off. What is you thoughts?
I just installed a new pump and check valve in a 06 Grand Prix.. I had a cel on for po411 code.. Now the pump runs and the cars cel is still off. hopefully it passes nys inspection.
I have a car that when accelerating it is very slow and I have a feeling it is this how do I know for sure that it's the cause sometimes the car stutters and I have never aswell changed this part or the secondary air injection check valve
So this appears to have happened to my 2007 Cobalt. Fuse is blown. Car wont start at all. When I exchanged the fuse with the ABS fuse, I did get the starter to spin. Check engine light has been on since they changed the ignition switch. Which the dealer said they couldn't find the reason for. Question is if I do all this replacement will the error code clear? I understand its really just a dead short situation. But for 3 times I got the starter to spin, no fire. Is that because of the ECM? And if the ECM reads correctly will it turn over?
I just change a secondary air injection pump on my 02 Deville and the OBD11 keep saying generic air pump anytime I tried to erase the code P0400 . Any suggestion on how to erase the code .
Where is the one way check valve located? Also if you replace the pump and the code keeps coming back , is it because they didn't put a whole in the rubber boot?
thanks for the video I have a 2013 chevy sonic 1.8 so I fill up with gas and when I start the car after filling it uo with gas keeps shuting off after the few times it runs fine I have people saying is the secondary air injection pump any suggestions. thanks
2000 gmc jimmy 4.3 so i had a po410 code and after finding the fuse was blown changed the fuse and code has not come back however i feel as if i have a lack of power and the truck is surging / shuddering kinda trailer hitching as they call it between 1500 and 2000 rpm and goes away upon acceleration to bring up.the rpms could this be a bad pump thx
A few drive cycles should turn off the MIL, or it can be turned off with a scan tool. However, if that wasn't the problem, the MIL light will come back on.
Possibly bogging, but only when the engine is cold and still in open loop. The air pump only runs for about a minute in open loop to help warm up the catalytic converter. Other than that, it doesn't run until the PCM does its self check, which is sometime during closed loop operation, and it doesn't run very long then.
So this probably explains why i get a vacuum type noise when I start the car after it sits all night. I thought it was my idler pulley so I replaced it and the tensioner and its still doing it
I installed new pump on 2006 Jetta because it was shot and code came back 0411. I replaced combination valve yesterday and code came back. I checked hoses and they are good. Any suggestions?
Wilfredo Colon yes after all of that the after market pump was pushing the pressure hose off due to not a perfect match. (I had dealer pressure test it to diagnose it.) I purchased a new $50 aftermarket pump and pulled hoses off pump noted the differences and filed the hose nipple was 1/4" to 3/8" too long and filed the pump shoulder it was about 1/8" too thick I think. What have you replaced?
You need to watch some videos on the AIR system... secondary AIR pumps air from the intake into the exhaust. The check valves are in place so exhaust gasses DON'T go back into the AIR system and ruin the air pump. You're thinking of EGR, which is the system that pulls (small amounts of) exhaust into the intake to lower combustion temperatures.
I'm not a mechanic, but you realize this makes absolutely no sense right? Hot air is less dense than cold air so you would effectively be lowering your O2 levels, which would DECREASE burn efficiency. You're thinking of the EGR system and that doesn't dump directly into your intake. This is not a part of the EGR system, that doesn't have a pump, it's powered by the exhaust.
mate..you might be able to help....I have a peugeot 307 2004 model. Engine light on P0410 error...diagnosis from mechanic: needs new air pump and valve...would that be the egr valve or something differen...the one way check valve that this bloke talks of? The only reason I ask is that the mechanic quoted a high preice for parts (1000 for pump and 200 for valve) and I am trying to source them myself...already found a $200 pump (new), but need confirmation on valve type...any help appreciated..thanks
![How to Fix P0411 Engine Code in 3 Minutes [2 DIY Methods / Only $9.68]](http://i.ytimg.com/vi/x432PwOqRMw/mqdefault.jpg)
Correction: The purpose of the secondary air injection system is to pass inspection.
@Alphonso Stufflebean Stick it, spammer.
Correction the purpose of the secondary air injection is to pass emissions
Thanks for the upload. This is happening with my 2008 Cobalt. We've replaced the valve, because we were getting the "Valve stuck open" code, but this explains how the water got into the pump. I'll be working on trying to replace the pump and hose now, and hope the new valve is working well enough to not cause the issue again.
Thanks for sharing. I had to replace this twice on the wife's 2007 Chevy Impala.Chevy should be paying for these.
I realize it is kinda off topic but do anyone know of a good website to stream new series online ?
@Bodhi Brian Ehh I would suggest Flixportal. just search on google for it:) -immanuel
@Immanuel Wallace Thanks, I signed up and it seems to work =) Appreciate it!
@Bodhi Brian Happy to help xD
Sorry to bother folks, I am suffering with this issue myself. Could you please let me know where I could buy a reusable unit? @immanuelwallace7095
Right on man. Great video. Thanks for the straight up, no non-sense video. Keep em coming. I am working on my 1999 Jeep Grand Cherokee. 2nd. gen. WJ. This might just do it, seems like I have done everything else. Thanks.
Thank u! 06 vibe gt p2441 code. Secondary air injection pump/valve. Between this vid and the others showing it being replaced i got a good understanding of what this is all about and how to fix it right. Thx again
is there a video on replacing the air pump
my regards from Saudi Arabia
great job
What if you don’t hear the pump come on but you have no codes?
Ok so my pump was working on my 99” suburban just fine at cold start up .
It was sucking air though the (Inlet) port just fine .
After power washing the engine bay and avoiding this unit I even put a rag in the inlet to avoid water after that it would not operate? Soon after it coded p0410
Today it is working but intermittently working and it it does it now (sputters ) air out of the inlet insure it pulling in through the inlet ?
Any ideas
can you by chance show how to put the small hole in it?
does a 2007 chevy colorado have this part? i am getting a p2431 and the part is called the secondary air injection system, but its not this part its all metal. is this the smog
Will this fix the P0411 error code? I don't want to have to open up the manifold to clean the PCV orifice
Anyone know where to get those check valves. Rock auto is out of stock and it looks like all the general places are out of stock
I have a P0412 code on my Camaro 2000 it makes my check engine soon light come on what do I do
thanx bud i have a 2004 chevy trailblazer 4.2 vortec will try fuse first , but if fuse went
i think i get the new check valve and pump havent looked yet to see if hard to put in i'll be doing that now , ty
Where is this on a 2004 Cadillac deville.Can this cause a p420 code also?
2008 Trailblazer. I replaced the pump and the check valve. Hoses are in good shape. Checked fuses and relays and they are in good working order. Engine check light will come on and then go off. What is you thoughts?
So if my pump works and my one way valve works what can cause a p0492
Very helpful,this is all new to me,hope we get it fixed right this time,messed up last time
I just installed a new pump and check valve in a 06 Grand Prix.. I had a cel on for po411 code.. Now the pump runs and the cars cel is still off. hopefully it passes nys inspection.
Wat other prombles u been haven I’m trying to fix my o6 Grand Prix
Thanks !!!
I'm looking for the reason why I have a P0411 code on my Chevy Sonic.
Don't trust many service centers.
Bro how did you fix it?
where is this located on a 2006 buick lacrosse
I have a car that when accelerating it is very slow and I have a feeling it is this how do I know for sure that it's the cause sometimes the car stutters and I have never aswell changed this part or the secondary air injection check valve
For which car?
Where is this on an 08 Chevy Cobalt LT? I need to get my inspection done here soon
Same here too where was it located?
@@AudatiousXtreme It's below the intake manifold.
What’s the name of the piece that connect to the end of the connecter?
P0411 code on my 03 vw passat fixed the code 0 codes showing but showing 1 incomplete in reading any suggestions?
So this appears to have happened to my 2007 Cobalt. Fuse is blown. Car wont start at all. When I exchanged the fuse with the ABS fuse, I did get the starter to spin. Check engine light has been on since they changed the ignition switch. Which the dealer said they couldn't find the reason for. Question is if I do all this replacement will the error code clear? I understand its really just a dead short situation. But for 3 times I got the starter to spin, no fire. Is that because of the ECM? And if the ECM reads correctly will it turn over?
thank you for taking the piece off it helped me inspect it.
I just change a secondary air injection pump on my 02 Deville and the OBD11 keep saying generic air pump anytime I tried to erase the code P0400 . Any suggestion on how to erase the code .
What about p02431 code ?
Where is the one way check valve located? Also if you replace the pump and the code keeps coming back , is it because they didn't put a whole in the rubber boot?
it’s bc it wasn’t the pump
so thats where all that water came from.... thanks for explaining that.
thanks for the video I have a 2013 chevy sonic 1.8 so I fill up with gas and when I start the car after filling it uo with gas keeps shuting off after the few times it runs fine I have people saying is the secondary air injection pump any suggestions. thanks
Purge Valve will cure that.
I live n Florida. Fortunately I don't have to worry about it. I shut the code whenever the Check Engine Light comes on.
This helped but I have a 2002 Chevy venture LT do u know where the location of this pump is?
Did you find it I can’t find mine Chevy express 4.2 2002
2000 gmc jimmy 4.3 so i had a po410 code and after finding the fuse was blown changed the fuse and code has not come back however i feel as if i have a lack of power and the truck is surging / shuddering kinda trailer hitching as they call it between 1500 and 2000 rpm and goes away upon acceleration to bring up.the rpms could this be a bad pump thx
Usually pump goes bad because of valve. It might cause that issue, but can't say for sure.
my 01 gmc jimmy has the same code... and mine hesitates when i accelerate in first gear
were is this located on a 2006 chevy blazer?
What about mercury Milan I4 I got same problem it po410 and po491
I have a 2001 Lincoln LS V6 that needs a secondary air injection pump. Where can I get one for a reasonable price?
Junkyard my friend
on 2010 impala how miles u need to drive the car to get it reset after the put in those two new parts
A few drive cycles should turn off the MIL, or it can be turned off with a scan tool. However, if that wasn't the problem, the MIL light will come back on.
so would a faulty pump cause bogging on acceleration or o2 sensor to go off?
Possibly bogging, but only when the engine is cold and still in open loop. The air pump only runs for about a minute in open loop to help warm up the catalytic converter. Other than that, it doesn't run until the PCM does its self check, which is sometime during closed loop operation, and it doesn't run very long then.
So this probably explains why i get a vacuum type noise when I start the car after it sits all night. I thought it was my idler pulley so I replaced it and the tensioner and its still doing it
JohnsonLJ2311 hi do you still get that vacuum sound because I had a 2009 and now I have a 2012 and I got the same noise when starting up.
good vid mate....question the valve that you talk about,,,is that egr valve? thanks in advance
No. He is referring to the diverter valve. The EGR valve is a completely different system.
Would you have an idea where this is located on a 2004 GMC Envoy
Under the vehicle, where the drivers seat is.
Thanks
I see these acdleco have dodge only chevy,gmc,cadi,bruick..
Where is this pump located on 2005 trail blazer please help.
under your vehicle on the right side it's bolted to a bracket near the cross member...
Is this pump on a 03 chevy trailblazer?
is this pump located under the cold air intake on a 98 v6 Ford mustang @ romanautomotive
Alex Castillo I’m having same problem code PO411 where is it located
On my ford 98 mustang 3.5 ..
Hi, if you poke a hole into the bottom of the cover, Would not the hole cause a vacuum Leek ... ?
what about if the light still come on!!!
fredrick neal did your check light stay on?
@@alexcastillo5092 mine is still on
Jay M is it still on?
I installed new pump on 2006 Jetta because it was shot and code came back 0411. I replaced combination valve yesterday and code came back. I checked hoses and they are good. Any suggestions?
Did you ever fix the P0411. I have the same code.
Wilfredo Colon yes after all of that the after market pump was pushing the pressure hose off due to not a perfect match. (I had dealer pressure test it to diagnose it.) I purchased a new $50 aftermarket pump and pulled hoses off pump noted the differences and filed the hose nipple was 1/4" to 3/8" too long and filed the pump shoulder it was about 1/8" too thick I think. What have you replaced?
I'm gonna get it deleted out my ecm & get a block off plate where the check valve is on the block! Too much unnecessary stuff on this lil 6cyl😡
Man all i asked was were it is located on a 2000 chevy blazer 4.3l
Can these be rebuilt?
+Riza Khan I don't know. SouthMainAuto just did a video on this same problem.
It's not a shut down code👍
OK so this DOES NOT pump air into the Exhaust, It pumps hot air (heated by the Exhaust) into the air intake. FYI.....
Just for anyone else reading the comments, I second this one as being correct. It's an emissions/fuel efficiency thing.
You need to watch some videos on the AIR system... secondary AIR pumps air from the intake into the exhaust. The check valves are in place so exhaust gasses DON'T go back into the AIR system and ruin the air pump.
You're thinking of EGR, which is the system that pulls (small amounts of) exhaust into the intake to lower combustion temperatures.
I'm not a mechanic, but you realize this makes absolutely no sense right? Hot air is less dense than cold air so you would effectively be lowering your O2 levels, which would DECREASE burn efficiency. You're thinking of the EGR system and that doesn't dump directly into your intake. This is not a part of the EGR system, that doesn't have a pump, it's powered by the exhaust.
BassItUp I was curious as to why you would want air added to your exhaust. Lol
mate..you might be able to help....I have a peugeot 307 2004 model. Engine light on P0410 error...diagnosis from mechanic: needs new air pump and valve...would that be the egr valve or something differen...the one way check valve that this bloke talks of? The only reason I ask is that the mechanic quoted a high preice for parts (1000 for pump and 200 for valve) and I am trying to source them myself...already found a $200 pump (new), but need confirmation on valve type...any help appreciated..thanks
I want to delete