Sonic boost gauge/ water temp gauge/ ZZP dual pillar pod install
ฝัง
- เผยแพร่เมื่อ 19 ต.ค. 2024
- Parts used were
ZZP dual gauge pillar pod
zzperformance....
glow shift boost gauge
www.glowshiftd...
glow shift coolant temp gauge
www.glowshiftd...
#sonic #boost #chevy #glowshift #howto #mechanic #gauges #zzp
i;am your newest subscriber great videos i won a 2011 chevy 6 speed manual cruze 2750.00 runs and drives rustfree florida car 3 owners i did car fax most of the maintance was done at the chevy dealership, i got a great deal
You should use the fuse tap it easier to use
For the yellow constant i tapped in the lift gate its keeps the setting
For the red 12 volt switch i tapped in to the spare fuse or cigarette fuse either one works
I didn't bother with the orange wire because like you mention it flashes and i don't like driving with bright dash
Yeah the fuse taps that double up fuses for 2 sources are better. I wasn't prepared. Lol ordered some too keep in stock tho
From what I’m seeing on my car, these are the same hose. I could be wrong but it looks like the hose just passed through a retainer or clip and continues under the manifold.
There is 2 hoses with a valve in the middle.
Look up intake manifold removal video. Dorman has one. Get a look of under the intake manifold and you'll see.
Good video but you created a shit ton of boost leaks
How?
I have a boostleak test kit. Professional mechanic for 10 years. This is my profession and my hobby. It held 30 lb no leaks.
How did you get that boot to push in
@@agautoworx5346 I need you to find my boost leak😂 I made a makeshift boost leak tester but can't seem to pinpoint where I hear the air coming from. I replaced the o-ring on the pcv and replaced the intake manifold gasket but I still hear leaking from somewhere back there😅
@@tylertherien1558 just pushed in on it hard