Navigating VPX Bliss: Table Installation Guide & Best Practice Tips! POV, PUP, Media/PinupPopper
ฝัง
- เผยแพร่เมื่อ 26 ก.ค. 2024
- Visual Pinball X - Install Best Practices to customize your experience on the ALP
Table : Black Knight (Williams 1980) by: bord (3.0)
Music, Mp3 files go in the following folder:
VPinball/VisualPinball/Music
Some require the pre-named music folder 📁 in its entirety to be pasted into Music 📁, some tables have you copy and paste the mp3 files directly into VPinball/VisualPinball/Music. If you receive a music error, this may be why.
Do not unzip Roms, place unzipped file in VPinball/VisualPinball/VPinMame/roms
UltraDMD files go in VPinball/VisualPinball/Tables
Same folder your tables.exe go
Thank you for watching, comment below if this video was helpful and / or informative. Like and subscribe for more content.
Under no circumstances will John Paul’s Garagecade be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether through John Paul’s Garagecade TH-cam Channel or a third party, in no event shall JPG be liable for any special, indirect or consequential factors beyond the control of JPG. JPG cannot guarantee against improper use or unauthorized modifications of this information. John Paul’s Garagecade assumes no liability for property damage or injury incurred as a result of any of the information contained in this video, Use this information at your own risk. JPG recommends safe practices when performing any do it yourself repairs and of with tools seen or implied in this video. Due to factors beyond the control of JPG, no information contained in this video shall create any expressed of implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment or information contained in this video is the sole responsibility of the user and not John Paul’s Garagecade. - แนวปฏิบัติและการใช้ชีวิต
Excellent Tutorial! Your knowledge of this topic is impressive and appreciate you taking the time to share it.
Thank you, sincerely appreciate the kind words and feedback ❤
Hi, great tutorial, I'm just starting out, have about 10 tables that I can now tweak a little better with your tutorial. Going to change my joytokey setting to match yours too, i was hoping someone already went through that so I didn't have to. big thumbs up!!
Greatly appreciated 🙌🏼
Thank you so much, this is EXACTLY what I needed!!
You’re most welcome.
Appreciate your help. I'm just diving in!
You’re most welcome. Appreciate the feedback. It’s a lot to take in at first but it starts to make sense once you dive in.
thank you so much this was a huge help!!
You are most welcome. Thank you for the feedback!!!
Bro, you taught me more in this video watching you do it, than i have learned reading the last 2 months!!!! !!! Thank you !!!
Appreciate the feedback brother. I feel your pain, figured I’d make a video once I figured out the how-to’s. Much easier to understand demonstrated over reading. You’re most welcome.
@@JohnPauls I have a table i downloaded and it had backglass and table ..and thn a media folder 📂 ..where does the media folder go ??
Media folder is usually used for customizing PinUp Popper
I.e. Wheel Icon, Backglass Image, Logos, Side Skirts, etc.
@@JohnPauls Hardest part ..finding roms ..😔
Great video. The part on adjusting the tables really helped. Is there a way to map the alp plunger directly to use it?
Yes, I’ll be making a video soon. Not overly complex to do but takes a few steps.
I never get anything on my downloads on pup could windows be blocking something what would I look for?
What guide did you use to map the keys for the alp to vpx? I'm using the LegendsPB-WTT joy2key profile and I am trying to map them in the vpx preferences menu. It doesn't seem to register my changes.
A lot of trial and error, couldn’t find a decent guide.
@@JohnPauls I think I have everything but the plunger working now.... I just dont see how they are porting it over in joy2key.
Plunger comes up as Z axis in Windows.
I’m struggling with some of the pup packs. It works perfect on some tables. Currently having an issue on Iron Maiden where it loads up but crashes as soon as I hit start to begin a game.
Rom might be the cause.
hi, can you upload ur joytokey profiles.
I believe it’s on one of the videos. Yes I’ll try
@@JohnPauls PLEASE DO :)
Is there a source of pre-configured POV files for the ALP?
I’ve seen a few files tossed around but they still need tweaking as it primarily based around user preferences and table graphics limitations. Too many variables. Learn to adjust them yourself, tweak to your preferences.
@@JohnPauls Thanks for the helpful video. I do love tinkering (perhaps more than playing) but VPX has been a huge time sink! Finally got the menu media setup only to find there's yet another layer to tweak. One day . . .
It certainly is a time sink, worth it IMO. Enjoy tinkering!!
i used to use joytokey not anymore i use pinup popper and vpx controls settings .
I’ve thought of switching however, if it ain’t broke, don’t fix it. Experiencing bare minimum lag with no issues, leaving it as-is. Glad to know popper and vpx are working for you. Thanks
Hey David, I’ve tried it out and can say there’s definitely a slight improvement. Minimal but worth it. Thank you again!
Were you able to get the ALP joystick working in Pinup Popper? Only thing I couldn’t get to function.
@@JohnPauls i used to when i had my first ALP but i sold it ..and got a new ALP i haven't got a new ALP control penal yet for my 2nd ALP . yeah atgames firmware updates really messed up my first ALP that why i have to buy a 2nd ALP never do a firmware update again .
@@JohnPauls yeah i was using joytokey for pinup popper and vpx i thought i was getting little lag but someone on Facebook told me to use pinup popper and vpx controls setting seem like it little better .i want to use FX3 controls but i been having problems on steam setting up my ALP controls ..after i do all the buttons setup on steam i don't get a save button and i don't know why it doing it either to me seem like it a glitch or something