Hi I'm in the USA I brought the machine but can get the hang of it with putting the balloons on the rim how much would you charge me to make this machine for me thanks
Awesome video so easy to follow I have made this it works too haha. I really struggle getting the balloons over the opening though any tips. Thank you for the video xx
No it will not be greasy. The tire shine works but I actually don't use it anymore because I found a better solution. Rinse the balloon inside and outside with lukewarm water, let it dry and your balloon will be super clear! You will be shocked
Air is coming out somehow. You have to find out where the air is escaping from and seal it. If you can't find it than you will have to leave the valve open and leave your vacuum on while you stuff your balloon
I realize this is a 2 year old video but your telling people to melt plastic without wearing a mask. You don't need to use a soldering iron at all a utility knife will cut a bucket easily a hole saw on a drill will cut a perfect circle without toxic melted plastic. Use a little sand paper for rough edges. Silicone caulking will be soft and air tight. 2 part epoxy putty will also work. There's a 4 inch slip cupling no cutting needed or a few inches of 4 inch pvc pipe sand edges a little Silicone or 2 part epoxy putty don't need the scrap fabric. Washing balloons isn’t necessary you washed off the powder decreasing the balloons longevity. Its a cup-ling not coop-ling its fishing line not wire. You can get a slip cupling instead of threaded. This is a cool concept for less expensive machine just needs some refinement so people aren't breathing toxic fumes from glues and melting plastic.
No, I wouldn’t recommend melting plastic all day every day breathing it in but to make a hole not a problem not gonna die you breathe more poison in walking outside every day. A utility knife can cut the bucket but. Force is necessary and dangerous not everybody can use utility knife.
I remember this too LOL I bought them in 2000. Some people have $700 machines and some people use 18 inch balloons and stuff them without one. I'm thinking about giving it a go. Just forgives or whatever not trying to make a business.
I love the video and I was quite impressed how you managed improvising with those tools If I may make a recommendation... You could use a 1-inch hole saw and move your coupler directly to the bottom of the bucket, near the perimeter. Using a hole saw will give you a much cleaner rounder hole; putting the hole on a flat surface on the bucket (instead of the curve on the bucket) will allow you to seal it much easier and cleaner also and then you will only need to hang the side of your bucket off the edge of a table to compensate for the dangledoo. Anyway like I said it was a beautiful DIY build and I will be making one of my own thank you for the inspiration!!
This is what I needed. I'm am so grateful. Because I had a plan but not 560 for the machine. This helps me get some protypes before I actually get an order.
your resourcefulness and creativity is amazing. i subscribed within the first minute of viewing this video. keep doing what you are doing the way you are doing it ! looking forward to seeing more of your videos.
This is an awesome idea thank you for the concept! Very informative! Wish you much success! I was thinking maybe using a bendy flexy glass to make a window in the bucket and seal it with adhesive to see whats going on inside! Keep up the good ideas!
Do I have to use my vacuum? Or can I use my electric balloon pump? I was going to order a stuffer bucket off of someone and then heard I had to use my vacuum after I already bought an electric pump.
What do you do with the balloon shine, for the balloons do you spray it on the inside of the balloons as well it won't bust the balloon ?? And do you still sell the stuffed balloons and how much are you charge. I need to get my pricing right I'm in a small City so for Valentine's Day
you are brilliant. Thank you for this hack! I used to work in a balloon shop in high school and we had the industrial stuffer we could only use with the 40 inch balloons.. I like this so much..
Hey, how’s it going? I wanted to give you a shout out for your video. All I was doing was talking about stuffing balloons and TH-cam. Send me your video after watching it. I upgraded your bucket and put a window in front of it because I couldn’t find the 5 gallon clear bucket, I’ll send you photos when I’m done.
Hi I am actually in the process of making mine too. just waiting for my ballons to come in, s washing the ballons a must, will that prevent it from popping?
5 gallon bucket with a lid 1 or 1/2 inch pvc ball valve 1 coupling to match the ball valve Plastic bond glue 2 pieces of old cloth Hot glue gun Hot glue sticks Scissors Anything with a 4 inch opening. A cup will do or you can get a 4 inch coupling from the hardware store.
The air is sucked by the vacuum which causes the balloon to expand instead of being blown open, it's sucked open from the vacuum on the outside of the balloon.
I have one with a 1 inch and another one with a 3/4 inch pvc pipe amd both work the same. You just have to keep the vacuum on suctioning while you stuff the balloon😊
Great video !! Thank you but no one going to address the way you pronounce “coupling “ as far as I know it’s pronounced “cupling” Not “coopling”. Am I wrong? My point is to inform you for your own benefit , there’s absolutely no negative intentions!! Hey maybe I’m mistaken !! Either way we appreciate your detailed instructions!!!
This design was great thanks it works really well and practical also very economical thanks
U really did a good job with showing how to do everything...good job honey
Thanks alot!
@@warmheartfamily can I paid u to make me one please please please
Thanks for this vid! Was looking for alternatives to paying $300-400 for stuffer machine!
I was doing the same thing cause good Lordddd $300-$400 🤦🏾♀️
Great idea! Thanks for sharing 🙏How much did you spend on each of your supplies? What was your total cost for this project?🤔💭
Very creative Sweetie!!!
Beautiful
Hi I'm in the USA I brought the machine but can get the hang of it with putting the balloons on the rim how much would you charge me to make this machine for me thanks
Hi Danielle, have you found anyone that's willing to make one for you? If you have, can you let me know? I would love to buy one.
Can you please provide a list of the supplies used
She tells you in the video.
How did you remove the inside of the 4 inch PVC drain?
Did you ever do a new video on this ?
I would pay you to make this for me!
Awesome video so easy to follow I have made this it works too haha. I really struggle getting the balloons over the opening though any tips. Thank you for the video xx
I know I'm kinda off topic but do anybody know of a good site to stream newly released tv shows online?
@Gunner Gideon Meh try flixportal. you can find it through google:P -miller
@Miller Cory Thanks, I signed up and it seems like they got a lot of movies there =) I really appreciate it!!
@Gunner Gideon happy to help xD
Hey did you ever find out how to get the balloon over the opening
wont the outside of the balloon now be greasy due to the tire shine
No it will not be greasy. The tire shine works but I actually don't use it anymore because I found a better solution. Rinse the balloon inside and outside with lukewarm water, let it dry and your balloon will be super clear! You will be shocked
Do yu have any idea why mine is not holding the air in the balloon once I close the valve
Air is coming out somehow. You have to find out where the air is escaping from and seal it. If you can't find it than you will have to leave the valve open and leave your vacuum on while you stuff your balloon
Ok thank you so much!
Video was great! I couldnt do it, my lazy ass would just buy the $20 stuff-a-loon machine 😂😂😂
Lol...you can do it🤣
I realize this is a 2 year old video but your telling people to melt plastic without wearing a mask. You don't need to use a soldering iron at all a utility knife will cut a bucket easily a hole saw on a drill will cut a perfect circle without toxic melted plastic. Use a little sand paper for rough edges. Silicone caulking will be soft and air tight. 2 part epoxy putty will also work. There's a 4 inch slip cupling no cutting needed or a few inches of 4 inch pvc pipe sand edges a little Silicone or 2 part epoxy putty don't need the scrap fabric. Washing balloons isn’t necessary you washed off the powder decreasing the balloons longevity. Its a cup-ling not coop-ling its fishing line not wire. You can get a slip cupling instead of threaded. This is a cool concept for less expensive machine just needs some refinement so people aren't breathing toxic fumes from glues and melting plastic.
Thanks for the helpful info. You do need to wash them if you want your balloon to be crystal clear.
@@warmheartfamilywhat do you wash them with and how?
@@tameshaberryman2943 just water. You just want to get the powder off.
No, I wouldn’t recommend melting plastic all day every day breathing it in but to make a hole not a problem not gonna die you breathe more poison in walking outside every day. A utility knife can cut the bucket but. Force is necessary and dangerous not everybody can use utility knife.
Need the list
She says everything in the beginning in detail
Hi. Thanks for making this video. Love it and also on Amazon they have 5 gallon bucket with its on vile. Between 35$and 60$.
Link please
I didn't no they still had these things. I remember buying my mom a huge stuffed balloon for mother's day back in 1994.
Same thing I was thinking. I remember getting these in high school
I remember this too LOL I bought them in 2000. Some people have $700 machines and some people use 18 inch balloons and stuff them without one. I'm thinking about giving it a go. Just forgives or whatever not trying to make a business.
Great job can you lit everything you used please and when will you do the 2.0 video ?
I love the video and I was quite impressed how you managed improvising with those tools
If I may make a recommendation...
You could use a 1-inch hole saw and move your coupler directly to the bottom of the bucket, near the perimeter.
Using a hole saw will give you a much cleaner rounder hole; putting the hole on a flat surface on the bucket (instead of the curve on the bucket) will allow you to seal it much easier and cleaner also
and then you will only need to hang the side of your bucket off the edge of a table to compensate for the dangledoo.
Anyway like I said it was a beautiful DIY build and I will be making one of my own thank you for the inspiration!!
Where’s the list?
This is what I needed. I'm am so grateful. Because I had a plan but not 560 for the machine. This helps me get some protypes before I actually get an order.
Amazing! I hope everything is going well
Thank you for this! When does the 2.0 video come out? Want to make one but will wait for that video to do so!
Your DIY tutorial is wonderful thank you so much for sharing and be blessed in the Lord Jesus
It is so confusing as to how the balloon gets inflated
Im lost!
Air is sucked out of the container
your resourcefulness and creativity is amazing. i subscribed within the first minute of viewing this video. keep doing what you are doing the way you are doing it ! looking forward to seeing more of your videos.
Thank you. Those are very encouraging words😊
I did it and the balloon fills up but then inflates do you know what I could be doing wrong?. How does the balloon not inflate?
This is an awesome idea thank you for the concept! Very informative! Wish you much success! I was thinking maybe using a bendy flexy glass to make a window in the bucket and seal it with adhesive to see whats going on inside! Keep up the good ideas!
I just made one for someone... what type of balloons exactly? Or i should ask for a link to order them?
Qualatex stuffing balloons
I want one made lol I’ll pay
How much?
Do I have to use my vacuum? Or can I use my electric balloon pump? I was going to order a stuffer bucket off of someone and then heard I had to use my vacuum after I already bought an electric pump.
What do you do with the balloon shine, for the balloons do you spray it on the inside of the balloons as well it won't bust the balloon ?? And do you still sell the stuffed balloons and how much are you charge. I need to get my pricing right I'm in a small City so for Valentine's Day
Where do you buy your balloons?
Same 🥲
I'm not seeing your items used list is there anyway you can give me a list what what you used
She says it in beginning of video
you are brilliant. Thank you for this hack! I used to work in a balloon shop in high school and we had the industrial stuffer we could only use with the 40 inch balloons.. I like this so much..
Great video and so creative! I'm gonna try to make one! Thanks for posting
Great Video...even my man had a compliment to give.🥰
Really? Wow! Thanks
Do you sell these ?
What size ballon is this ?
Can i pay u to make mine and ship to me?
I don't see the product list, am i missing it?
She says it in beginning of video
She says it in beginning of video
Hey, how’s it going? I wanted to give you a shout out for your video. All I was doing was talking about stuffing balloons and TH-cam. Send me your video after watching it. I upgraded your bucket and put a window in front of it because I couldn’t find the 5 gallon clear bucket, I’ll send you photos when I’m done.
very creative. Thank you for sharing.
This is Amazing....!! Great tips too
Could you glue the coupling on the top of the lid with the edge on the bottom flush with the lid?
Can I ask why do my balloon keeps popping when I stretch it over the opening. It’s as of it’s too much stress. I have a 3 inch pvc pipe
Omg mines keep doing the same thing like are they to thick or something
Isn't that a bit un healthy putting auto detailing spray on it then giving it to a child? That stuff is toxic
It's polish... Like pledge. No I wouldnt recommend licking or ingesting the balloon, but it's not radioactive or anything.
Kids shouldn’t be eating balloons soooooo … and truly small children shouldn’t even be playing with balloons due to choking risks.
That was awesome! Brilliant way of doing this without an expensive machine. Great job!!!
Thank you. This was a great video!
Now that's genius!!!
Can't wait to try this! Thanks for sharing!
What kind of armor all did u use to shine balloon
Would deeply appreciate if your video was louder can barely hear you.
It’s cup-ling not coop-ling. Lol. Good video!
It’s coupling 😭😭
Hi I am actually in the process of making mine too. just waiting for my ballons to come in, s washing the ballons a must, will that prevent it from popping?
🧡🧡🧡
Wow!! This is so detailed and intricate, that’s so
Dope that you know
How to do
This Desi!
Wow!! This is so detailed and intricate, that’s so
Dope that you know
How to do
This Desi!
Hey. I missed the list of things to make this . Can you please tell me what do i need ?
5 gallon bucket with a lid
1 or 1/2 inch pvc ball valve
1 coupling to match the ball valve
Plastic bond glue
2 pieces of old cloth
Hot glue gun
Hot glue sticks
Scissors
Anything with a 4 inch opening. A cup will do or you can get a 4 inch coupling from the hardware store.
I’m struggling to find a 5 gallon bucket I’m in Australia they seem to do only the tall thin buckets at 20 litres
@@warmheartfamily will a 3/4 inch pvc ball valve work?
Thank you I made one today.
What a great idea ❤ thanks a lot for sharing your knowledge with us.
Where did you purchase the stuffing balloon from?.. do you have a Facebook group?
Awesome job.
GREAT VIDEO….!!!!
Where do you get the base from
I thought maybe it was just a long, skinny balloon tied into a circle. The small styrofoam wreaths may work too.
You did an excellent job explaining everything and what to purchase….I’m definitely trying this….thanks for sharing ❤️
Thank you!
Awesome idea,, ❤️❤️❤️
Hi there how high does the bucket need to be I can only get short ones
Great informative video one of the best so far Godbless keep safe xxx
What size balloon can fit on this?
That’s too much work. Just got buy a stuffer
Absolutely if you have the money to do so.
I wanted to just buy one but couldn't find anywhere to buy from that seemed legit and good quality online. So I'm here lol
It’s not. It took me 10 min to do this
@@ednishalee5272 do you have a supply list for the items
She says everything she uses on detail in beginning of video
Very clever young lady...
Can you make me one😊
You are a genius girl!!
Great job and thanks. I want to make one now
Wat size is the water valve
can you make one for me and sell it please
Great video
GENIUS
Wonderful video 💕
Has the 2.0 been loaded?
Mines not blowing up my balloons what am I doing wrong
You have air escaping
🎉❤
How does the air from the inside of the bucket get into the stuffed balloon?
Pulling air out of the bucket makes the balloon inflate.
The air is sucked by the vacuum which causes the balloon to expand instead of being blown open, it's sucked open from the vacuum on the outside of the balloon.
Love it where do you purchase your balloons?
Bargain balloons and amazon. Qualtex 18 inch stuffing balloons
@@warmheartfamily yay thank you!!
What kind of balloon should I get for this
She has a video previous to this one showing how she makes the balloon and shares links where you can purchase
Nice video!
Hey mom!
Thank you for posting! This is easy to follow!
Why do you wash the balloons?
You don't have to wash them at all. I do it because it takes the powder off and makes them even more clear
What are you using to melt the plastic
She used a soldering iron.
Is anyone watching the same video? She says everything she used in detail in the beginning. And u can see what she is using
Great video. Would you use a 1” pvc pipe if you wanted to go that route?
Yes you can use 1 inch
@@warmheartfamily thank you
I have one with a 1 inch and another one with a 3/4 inch pvc pipe amd both work the same. You just have to keep the vacuum on suctioning while you stuff the balloon😊
@@warmheartfamily ok thank you very much
When I keep the vacuum on my balloon pops every time
If you keep the vacuum on won’t the balloon burst
can u tell me everything u used in the video i can’t really hear
@@dominiquebraswell2800 turn on closed captioning
No. The balloon cannot get larger than the bucket.
mine bust
Feel around to see what's sharp in there. It only bursts if there's something sharp
I dpnt have a regular house vacuum. How can I make this machine to use with my electric balloon pump?
You need suction not inflation.
sighhh...ok thanks much
Buy a small & cheap vacuum from goodwill
@@mikeg2504 thanks I'll work something out lol
@@warmheartfamily can I pay you to make this for me
May I ask what are the sizes of the coupling, ball valve & pipe? I called myself reading everything, but don’t recall seeing it. Thank you in advance
Yes I hope she respond back because I need to know lol
Go 3/4 ball valve and 1/2 inch coupling
@@klizzyykicks1712 thank you. That what I ended up using.
@@MegaTlicious u got it 👍🏾
She says it all in the beginning
where did you get the balloons ?
Great video!! I’m super excited to learn how to make the 2.0 version. Subscribed
Will it be shown soon? 😅 excited to try it out
Im trying to do it really soon. Im still recuperating from easter. And mothers day is coming up.
Would love to see it. I would love to make balloons for mother's day
How long do it take the glue to dry before you can use it?
If you use the jb weld plastic bonding glue you can use it after an hour
Hi does the tire shine actually dry or will it stay greasey? Ty
No it doesn't dry. You don't need it. Wash your balloon inside and out with water and than let it dry. That's really all you need
Great video !! Thank you but no one going to address the way you pronounce “coupling “ as far as I know it’s pronounced “cupling” Not “coopling”. Am I wrong? My point is to inform you for your own benefit , there’s absolutely no negative intentions!! Hey maybe I’m mistaken !! Either way we appreciate your detailed instructions!!!
Thanks for that!
Do you have a fb or ig ?