This is the best video i've seen on chain damascus. I can see how the alcohol flux and general patience made all the difference. almost no shattering, no inclusions, just a good billet. Nice work! I have enough confidence in this technique to try it myself. All the others i've seen looked like a crapshoot.
Thought I'd mention something about the brake cleaner, as well as any other solvents, always make sure it's NON-Chlorinated!! Chlorinated solvents decompose with high heat to form deadly phosgene gas!! I noticed the label on your can was Non-Chlorinated. Just thought I'd share that since some don't know this. Really cool stuff! Thanks so much for sharing your work!
Nice work. I've never welded motorcycle chain but I have done cable. I heated the cable to a black heat to get rid of the grease. After a couple of sessions in the forge it is pretty clean. After cooling, I soak the cable in a simple saturated solution of borax and water. My tap water is pretty pure, but you'd want to use distilled H2O if yours has a lot of scale in it. I let the cable soak overnight, then gently warm it in the forge to drive off the water. Of course i still sprinkle borax on during welding, but I've always got good welds with the water based flux and I don't have to worry about flammable liquids. You've got me inspired now and I just acquired a box of old chainsaw chains at a garage sale. Time to make a billet and see what I can do with it. Keep up the great videos and forge on!
Tim, your presentation is excellent. I like your 'matter of fact' style, it is so enjoyable to watch. The Motorcycle chain Damascus is brilliant. Well done old Mate!
Been doing some forge welding lately. It's tough using a coal forge, hammer and anvil. You are the first person I've seen teach the lesson of patience so clearly. Thanks, I needed that.
Hello Lou, Damascus is much more difficult in a coal forge you need quite a large fire with a large neutral layer in the center. It makes things a lot easier that way. But my hat's off to you Damascus in any coal forge is difficult to say the least. Thanks for watching and take care.
BIG DOG FORGE in the interest of clarity and honesty.... I'm forge welding in my coal forge but not pattern welding. I'm just doing stuff like making chain. I've managed fluxless forge welds because I use a side blast forge and can get that neutral layer a bit easier I think. But Damascus? I'd be afraid to waste the good steel right now. I intend to do it with coal but I already have the old air compressor tank waiting to turn into a propane forge.
Thank you thank you thank. I have been watching hundreds of these videos from different people. And always wondered if there is a pre flux to soak in. Thank you for answering that long awaited question.
That Ukraine guy dips his billets in kerosene. As the kerosene burns off in the forge it prevents oxygen from oxidizing the metal and aids in clean forge welds. He also uses a sand and borax flux. Great video!
Tim - that billet is incredible!! As always, I learned a lot - you have a wealth of knowledge and appreciate you sharing to help us laymen. One thing that stands out is the high risk of error in forge welding chain, but you take it slow and smart - step by step - not hurrying or forcing it to better ensure success - congrats mate - cheers!
Hello Rick, thanks for all a kind words my friend. I will send you a message very soon regarding the other thing I'm almost ready to go. Thanks for taking the time to check it out and take care brother.
Tim that billet came out awsome I super saturate borax with water it steams away but leaves more borax in between works great on cable too thank for sharing brother
Wow Tim, I've watched this video several times, and I can't get the whole piece to forge weld... but I'm having a blast trying. Only Difference is I'm forging all by hand... thank you so much for being you Tim and doing all the awesome videos. Your in the best brother.
@Steve Syncox thanks Steve. I've been there lots. Lol. Borax solution, plus the 2 you mentioned, thinner, gun cleaner(auto body supply), hahaha I finally got a good weld after a few fails. Lol. Thanks again Steve.
Hey big dog. I started forging and knife making a little while ago and wanted to say thanks for the inspiration and guidance. I started to make something similar with bycycle chain so the pattern is smaller and ran into a few issues with delamination but after watching this I think I might have it beat
Hi Tim, Great work there - I didn't think you would be able to do it with all the gaps. Using BORAX seems to get into all the nooks & crannies but you had the patience to follow it through, resisting going right to the press. Great Video as always Dave (UK)
Hello Dave, thank you so much for the kind words. And I also have a package to send out to you it should be going out with all of my tong orders early next week, I get a better price on shipping if I ship in bulk. Thanks for tuning in and take care.
Tim you are awesome! I wanted to make some Motorcycle Damascus awhile ago and was not sure how to go about it. So thank you great info and content the billet turned out super nice!
Man that really turned out beautifully! That's one heckuva big billet too! I may have made mention of this in the past, but another thing you can use to forge weld is kerosene, which is known as a hydrocarbon 'flux'. It's not good for dirty Damascus jobs like this, but it can be great for normal damascus billets. Basically you let the billet soak in kerosene, then when you put it into the forge the kerosene burns off and leaves a layer of carbon that encases the billet. I have read that it sorta acts like a carbon 'canister', like when you canister weld materials. Apparently you need to be careful not to move or shake the billet too much before you get it to the hammer or press to set the weld, as the carbon 'case' can break and fall off, thus exposing the layers to the oxygen. It's also important to have a reducing atmosphere in your forge. I have also seen master smith Kyle Royer here on TH-cam soak the billet in kerosene simply for the purpose of acting like a 'glue' for the borax to stick to on the cold billet, this way it never has a chance to form scale as it can while pre-heating it for the flux to stick. The kerosene is best because it the purest hydrocarbon with no additives to leave behind when it burns off. FWIW, here is a short thread on bladeforums that talks about it if you're interested: www.bladeforums.com/threads/is-it-a-flux-or-a-can-in-liquid-form.888292/ Anyway, this one was definitely a pleasure to watch. You're quickly become a forge welding pro 👍. Also, congrats on just about reaching 5000 subs, you've definitely earned them. Take care and give big dog a good belly rub for me! 😉
Hello Paul, thanks for all the great info sir I'm definitely going to be giving kerosene to try in the near future it sounds as if it may work better than alcohol, and thanks for the link to the blade forums there's a lot of good information there much appreciated, anyway I hope things are going well in your world and big dog says hi. It's good to hear from you my friend take care and be safe.
that was an awesome forge welding of a drive chain. i have seen it done in person and on youtube but never in that way with that stock as the cutting edge and a stabilizer for the chain. Thank you BIG DOG. great 💡. awesome.
Have watched a lot of shurap's videos; the guy makes beautiful knives. Would have loved to have seen the finished knife/knives from the billet made in this video. I intend to try this if I can find the old chain to work with; would really like to make a big bowie out of this material.
the guy from Ukraine use kerosene. and his flux powder contains - Borax 90% + quartz sand 5% + powder of charcoal 5%. his own formula. sorry my english.
Thanks for the information that makes a lot of sense, I've been experimenting with quite a few things lately I'll have to give this a try. Take care and thanks for tuning in.
Thank You Both for this. I have been Trying to figure out a good pre flux slurry recipe. Why I didn't think of the rubbing alcohol before... Dear God, I run an instructional channel here on TH-cam and I suddenly feel a drooling ear biter.
i think the addition of a bit of charcoal in the powder flux is a great idea when using a gas forge, but neither the sand nor the charcoal are going to disolve in kero.
Hello Big Dog! The guy in the. Ukraine was using kerosine and his flux powder contained 90% borax quartz sand and 5% charcoal! To do his motorcycle chain Damascus! Been watching your videos for bout five weeks now! I've learned a lot as I'm just getting started in the business! Really enjoy it as a sideline! I'm disabled so it helps me with filling my time with something to do that keeps my interest and creativity growing! Thank you for all your doing it really does a lot for us all!!
Another awesome video Tim. I followed your tips and turned out an amazing chainsaw damascus knife. Thanks heaps for making the world a better place with sharing such amazing knowledge.
..Great Job Tim !! You ought to call your projects "Wonder Damascus". we wonder what it will look like and you show us. I like the steel you put in the edge, Brilliant!!...
Greetings from England, just wanted to say that you are an awesome bloke, love your videos, so good to see an artisan art work. Keep up the outstanding projects and I will see you on my computer screen! TTFN.
I always enjoy watching you create a beautiful piece of art from a pile of "scrap". you are a true credit to the art of blacksmithing Tim. keep up the great work!!!!! and you should make a square circle hammer like the one you got from Aec Steele for the 5k give away.
Hello Brandon thanks for all the kind words, I have only made small hammers in the past about 1 1/2 pounds is the largest I've ever done but I would like to give it a try, you may have something here, will have to see if time permits. Thanks for the input and thanks for watching.
Dmitry.. The guy from Ukraine use kerosene to clean all the oil and grease and as fluks, I asked him a few months ago And his answer: “I sprinkle flux (90% borax + 5% quartz sand + 5% charcoal powder) this is necessary for forging (forge) welding. The flux is alloyed with scale - the formed substance is sufficiently fluid and is easily displaced by deformation. In addition, the flux protects against oxygen and charcoal, carburizes the surface layer of metal - which lowers the welding temperature”.
Not much I can say that others have not pointed out or said. But I'd like to tell you a big THANK YOU! for making these informative vidios. you rock man!!
Thanks for your time and effort to make sure you give us a great videos . Awesome pattern, maybe a hammer for the give away and congratulations on being so close well earned Tim
Thank you Rick I appreciate the kind words, a couple of people have asked about a hammer for the giveaway, I'm not sure but I think I may give it a try and see how it goes. Thanks for the input and thanks for watching take care.
Thanks Tim, really enjoying your video's, very instructional. My home made coke forge works well enough for knives, but after watching your damascus video's I'll have to have another go at damascus.
Beautiful pattern and your skill with it is amazing.. I've seen so many people fighting the whole way. You were able to use so much of the steel its amazing. Adding the high carbon edge was brilliant and the "Flux soak" is such a creative solution! Bravo sir!
Awesome video, very informative and answers a lot of questions about why some people may have trouble with trying to forge weld chains. Really seems to be that inspections of the chain and cutting the chain is crucial. Might be the reason why I've seen the links just pop off when forging, I've also seen them not cutting the chain and just rolling it up and tack welding it. Great video as always bud! You should get something in the mail by next week! With the drawing, you could do a small kneck knife giveaway or something that I don't believe that you've done before. You could make a Damascus bottle opener or a Damascus leaf to put on your car keys.
Hello Phillip, sorry about the late reply it's been very busy here, I love your suggestions for the giveaway I'm thinking about a neck knife but I haven't quite decided yet. Thanks for all the kind words talk to you soon brother.
BIG DOG FORGE No worries! I watched your video this morning at 4AM, trying to sleep. You definitely have been busy! You have tong making down to a mini assembly line! The jigs you Come up with are so damn impressive! It was fun watching the tongs come alive! Dr. Frakentong!!! You will have a few things to pick up at the post office this week :) I think you'll like it!
Enjoyed the video, makes total seance to me! Me and my boss are in a composition to see who can make Damascus first. He's really struggling so I've just shared this video with him. I dont think he is getting it hot enough or cleaning the materiel properly first...
It sounds like an awesome competition, it's good to hear about this kind of thing these kinds of exercises really improve our blacksmithing skills. Good luck and thanks for watching.
Hey Tim, thinking of a giveaway idea. Some ideas I thought of were: a good chunk of a really neat Damascus pattern for someone to create their own project, a Damascus set of tongs, Damascus knife, or if there is another item you are pretty good at, do that as the giveaway. I think tongs are what folks really know you for at the moment. I follow Alex Steele and obviously he does hammers and similar tools for his giveaways.
Thanks for the input Bryan do appreciate it so much, I was thinking of a pair of usable Damascus tongs but will have to see. Thanks again and take care.
Tim,The Ukranian, Demitri, used 5% nitric acid for the chain and he said he uses Kerosene for cable Damascus. Either way, he seems to be consistently susccessful!Thanks very much for this, I have a few ready to forge for a couple weeks now. When work subsides, I'll post my process. Cross your fingers.Ron
Thanks for the information I've been experimenting with quite a few things and this gives me more to go on, and good luck with your forging I hope that goes well for you. If you'd like to send along some pictures I can show off some of your work in a video if you'd like. Thanks for tuning in take care.
Im thinking that timing chain might be easier to forge weld together as it has more links stacked together with less gaps. great video it came out fantastic.
Flux helps with bonding and also gives the molten metal something to follow as its being smooshed helping seal and complete welds...a good example to watch on a big scale would be copper pipe flux then attatch it to another copper pipe but use a soldier...if you look inside youll see the flux as its melting and travelung give the soldier a path to follow as it travels and fills all gaps....same concept for forging steel it also clenses too helping remove impurities.
I guess Im asking randomly but does someone know a trick to get back into an Instagram account..? I was stupid lost the password. I would appreciate any tips you can give me
@Phillip Jaxson I really appreciate your reply. I got to the site thru google and I'm in the hacking process now. Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
Great video. Patients is tuff to teach. Never thought about alcohol. No forge of my own yet but appreciate all your work. Wonder how that billet would look as motorcycle handle bars or levers. Thanks again
Thanks for tuning in Zane, I hadn't thought about motorcycle levers but that sounds like an awesome idea. Thanks for the kind words I do appreciate it, take care and be safe.
Tim, I think the Ukrainian is Shurap, and, according to Google Translate, he uses kerosene as a pre-soak. Borax is very soluble in hot water. You might try dumping borax into boiling water until it quits dissolving (making a super saturated solution), and then soak the chain/wire rope in that.
Thanks for the info, I've been experimenting with quite a few new things lately I'll have to give this a try. Much appreciated and thanks for watching.
Hello Philip, Thanks for the suggestions I do appreciate that, I'm not sure that I'm quite good enough to do a Bowie knife for someone yet but I definitely have a few tongs laying around, thanks for watching my friend take care.
I'd love to just have the bilit you made in this video!! It turned out so amazing that I think I'm going to have to start putting together stuff so I can try to do this but, with me being disabled due to spinal injuries, not sure if I'll be able to...
They put oil proof O rings in motorcycle chains to seal out the dirt from getting into the moving part of the chain. they are called sealed chains and are expensive 3 times the price expensive. but they really dont last much longer than a good chain. you just dont have to lube them
This is the best video i've seen on chain damascus. I can see how the alcohol flux and general patience made all the difference. almost no shattering, no inclusions, just a good billet. Nice work! I have enough confidence in this technique to try it myself. All the others i've seen looked like a crapshoot.
Thanks Joseph, I hope you have good luck with this, thanks for watching and be safe.
Tim, I think Fred would have been proud of the job you did. The alcohol and borax is new to me and a slick idea.. Great job and thanks for sharing.
Thought I'd mention something about the brake cleaner, as well as any other solvents, always make sure it's NON-Chlorinated!! Chlorinated solvents decompose with high heat to form deadly phosgene gas!! I noticed the label on your can was Non-Chlorinated. Just thought I'd share that since some don't know this.
Really cool stuff! Thanks so much for sharing your work!
Very important info, thanks for mentioning that.
Nice work. I've never welded motorcycle chain but I have done cable. I heated the cable to a black heat to get rid of the grease. After a couple of sessions in the forge it is pretty clean. After cooling, I soak the cable in a simple saturated solution of borax and water. My tap water is pretty pure, but you'd want to use distilled H2O if yours has a lot of scale in it. I let the cable soak overnight, then gently warm it in the forge to drive off the water. Of course i still sprinkle borax on during welding, but I've always got good welds with the water based flux and I don't have to worry about flammable liquids. You've got me inspired now and I just acquired a box of old chainsaw chains at a garage sale. Time to make a billet and see what I can do with it. Keep up the great videos and forge on!
Thank you so much for watching.
Tim, your presentation is excellent. I like your 'matter of fact' style, it is so enjoyable to watch. The Motorcycle chain Damascus is brilliant. Well done old Mate!
Thank you Ned, I do appreciate all the kind words. Thanks for tuning in and take care.
That's probably the nicest billet of chain Damascus I've seen. Beautiful! I like the "no rush" approach. Great job, Tim.
Thanks James, take care and thanks for watching.
Been doing some forge welding lately. It's tough using a coal forge, hammer and anvil. You are the first person I've seen teach the lesson of patience so clearly. Thanks, I needed that.
Hello Lou, Damascus is much more difficult in a coal forge you need quite a large fire with a large neutral layer in the center. It makes things a lot easier that way. But my hat's off to you Damascus in any coal forge is difficult to say the least. Thanks for watching and take care.
BIG DOG FORGE in the interest of clarity and honesty.... I'm forge welding in my coal forge but not pattern welding. I'm just doing stuff like making chain. I've managed fluxless forge welds because I use a side blast forge and can get that neutral layer a bit easier I think. But Damascus? I'd be afraid to waste the good steel right now. I intend to do it with coal but I already have the old air compressor tank waiting to turn into a propane forge.
Thank you thank you thank. I have been watching hundreds of these videos from different people. And always wondered if there is a pre flux to soak in. Thank you for answering that long awaited question.
Glad it was helpful!
I love how "the guy in the Ukraine" is no other than Shurap. Lol
Amazing technique to get that forge welded into a solid bar. The pattern is spectacular. Would love to see a Tanto made from that billet.
I've been thinking about doing a Tonto for quite some time I think you're right it would look awesome. Thanks for tuning in take care.
I absolutely love that pattern. Easily top five ever. I need a piece of Damascus like that
Best chain Damascus I've ever seen.
Thank you Larry, and thanks for tuning in, take care.
That Ukraine guy dips his billets in kerosene. As the kerosene burns off in the forge it prevents oxygen from oxidizing the metal and aids in clean forge welds. He also uses a sand and borax flux. Great video!
Tim - that billet is incredible!! As always, I learned a lot - you have a wealth of knowledge and appreciate you sharing to help us laymen. One thing that stands out is the high risk of error in forge welding chain, but you take it slow and smart - step by step - not hurrying or forcing it to better ensure success - congrats mate - cheers!
Hello Rick, thanks for all a kind words my friend. I will send you a message very soon regarding the other thing I'm almost ready to go. Thanks for taking the time to check it out and take care brother.
Tim that billet came out awsome I super saturate borax with water it steams away but leaves more borax in between works great on cable too thank for sharing brother
Thanks wade and thanks for the info, take care.
You're the coolest. Thank you so much for sharing your hard earned skills with us young fellas. You have a great channel. I appreciate you.
Thank you very much. And thanks for taking the time to check out the video.
Wow Tim, I've watched this video several times, and I can't get the whole piece to forge weld... but I'm having a blast trying. Only Difference is I'm forging all by hand... thank you so much for being you Tim and doing all the awesome videos. Your in the best brother.
Soak your billet in diesel or kerosene before first heat. It burns off any oxygen, flux after it gets hot then tighten, flux, soak, then set it.
@Steve Syncox thanks Steve. I've been there lots. Lol. Borax solution, plus the 2 you mentioned, thinner, gun cleaner(auto body supply), hahaha I finally got a good weld after a few fails. Lol. Thanks again Steve.
Hey big dog. I started forging and knife making a little while ago and wanted to say thanks for the inspiration and guidance. I started to make something similar with bycycle chain so the pattern is smaller and ran into a few issues with delamination but after watching this I think I might have it beat
Thanks for watching.
Hi Tim,
Great work there - I didn't think you would be able to do it with all the gaps. Using BORAX seems to get into all the nooks & crannies but you had the patience to follow it through, resisting going right to the press.
Great Video as always
Dave (UK)
Hello Dave, thank you so much for the kind words. And I also have a package to send out to you it should be going out with all of my tong orders early next week, I get a better price on shipping if I ship in bulk. Thanks for tuning in and take care.
Many thanks - I'm chuffed,
let me know if you require anything sent over from my side of the pond
That billet reminds me of a diamondback rattlesnake skin. Nice looking pattern!
Thanks, and thanks for tuning in.
Tim you are awesome! I wanted to make some Motorcycle Damascus awhile ago and was not sure how to go about it. So thank you great info and content the billet turned out super nice!
Thanks for the kind words Stephen, good luck with your Damascus I hope it turns out well. Take care and thanks for tuning in.
I think that is the most beautiful piece I've seen so far. The only thing I liked more when the darth Vader thing.
I bet the shop smelled awesome with all that brake cleaner yum.
It's one of my favorite things it's quite good on toast, thanks for watching Cal take care of yourself my friend.
Man that really turned out beautifully! That's one heckuva big billet too!
I may have made mention of this in the past, but another thing you can use to forge weld is kerosene, which is known as a hydrocarbon 'flux'. It's not good for dirty Damascus jobs like this, but it can be great for normal damascus billets. Basically you let the billet soak in kerosene, then when you put it into the forge the kerosene burns off and leaves a layer of carbon that encases the billet. I have read that it sorta acts like a carbon 'canister', like when you canister weld materials. Apparently you need to be careful not to move or shake the billet too much before you get it to the hammer or press to set the weld, as the carbon 'case' can break and fall off, thus exposing the layers to the oxygen. It's also important to have a reducing atmosphere in your forge.
I have also seen master smith Kyle Royer here on TH-cam soak the billet in kerosene simply for the purpose of acting like a 'glue' for the borax to stick to on the cold billet, this way it never has a chance to form scale as it can while pre-heating it for the flux to stick. The kerosene is best because it the purest hydrocarbon with no additives to leave behind when it burns off. FWIW, here is a short thread on bladeforums that talks about it if you're interested: www.bladeforums.com/threads/is-it-a-flux-or-a-can-in-liquid-form.888292/
Anyway, this one was definitely a pleasure to watch. You're quickly become a forge welding pro 👍. Also, congrats on just about reaching 5000 subs, you've definitely earned them. Take care and give big dog a good belly rub for me! 😉
Hello Paul, thanks for all the great info sir I'm definitely going to be giving kerosene to try in the near future it sounds as if it may work better than alcohol, and thanks for the link to the blade forums there's a lot of good information there much appreciated, anyway I hope things are going well in your world and big dog says hi. It's good to hear from you my friend take care and be safe.
That alcohol flux thing is ingenious. Not something I'd ever have thought of, but it makes perfect sense.
Thank you and thanks for watching.
that was an awesome forge welding of a drive chain. i have seen it done in person and on youtube but never in that way with that stock as the cutting edge and a stabilizer for the chain. Thank you BIG DOG. great 💡. awesome.
Thanks for the kind words Todd, and thanks for watching be safe.
absolutely amazing. I wish I could watch your videos all the time. thank you.
Thank you for the kind words Ed, and thanks for watching.
You have the funnest videos.
Nice work and a great finished product. Thanks for the video!
Thank you very much and thanks for watching.
Thank you for sharing this with me. Just got some scrap chain from work, and was going to try some chain Damascus
Have watched a lot of shurap's videos; the guy makes beautiful knives. Would have loved to have seen the finished knife/knives from the billet made in this video. I intend to try this if I can find the old chain to work with; would really like to make a big bowie out of this material.
Thanks 👍
the guy from Ukraine use kerosene. and his flux powder contains - Borax 90% + quartz sand 5% + powder of charcoal 5%. his own formula. sorry my english.
Thanks for the information that makes a lot of sense, I've been experimenting with quite a few things lately I'll have to give this a try. Take care and thanks for tuning in.
Thank You Both for this. I have been Trying to figure out a good pre flux slurry recipe. Why I didn't think of the rubbing alcohol before... Dear God, I run an instructional channel here on TH-cam and I suddenly feel a drooling ear biter.
i think the addition of a bit of charcoal in the powder flux is a great idea when using a gas forge, but neither the sand nor the charcoal are going to disolve in kero.
Hello Big Dog! The guy in the. Ukraine was using kerosine and his flux powder contained 90% borax quartz sand and 5% charcoal! To do his motorcycle chain Damascus! Been watching your videos for bout five weeks now! I've learned a lot as I'm just getting started in the business! Really enjoy it as a sideline! I'm disabled so it helps me with filling my time with something to do that keeps my interest and creativity growing! Thank you for all your doing it really does a lot for us all!!
thanks for the info.
Another awesome video Tim. I followed your tips and turned out an amazing chainsaw damascus knife. Thanks heaps for making the world a better place with sharing such amazing knowledge.
Very cool. You're a true artisan.
Great video and nice pattern on that billet. Look forward to the next one.
Thanks Trevor, and thanks for watching.
..Great Job Tim !! You ought to call your projects "Wonder Damascus". we wonder what it will look like and you show us. I like the steel you put in the edge, Brilliant!!...
Hello my friend, thanks for all the kind words and thanks for tuning in, take care of yourself.
Learned a lot as always. Patience being the key. Much appreciated !!
Thanks for watching Alex, take care.
Thank ya Mr. Tim. That was awesome!
Thank you and thanks for tuning and take care.
you are the great boss in this business, I love how to look at how you work with metal Greetings from Poland martin and emilia
looks like fried eggs lol awesome skills to forge chain. incredible stuff
Thanks 👍
That pattern is really great!
Greetings from England, just wanted to say that you are an awesome bloke, love your videos, so good to see an artisan art work. Keep up the outstanding projects and I will see you on my computer screen! TTFN.
Thanks Mark, I hope things are going well in England, thank you for all the kind words I do appreciate it take care of yourself my friend.
The Ukraine guy uses kerosene he has a weird way of doing things butt is a badass blacksmith. Awesome job sir
That's awesome beautifully done
Thank you very much!
Ended up looking fantastic the flux makes sense I learned quite a bit of thank you for sharing
No worries Greg, thanks for watching take care.
another awesome billet. really enjoyed that. I bet the chain would also look great in a powder steel can billet
Hello Ron, I agree it would look awesome and a canister Damascus, that's for an upcoming video. Thanks for tuning in.
I always enjoy watching you create a beautiful piece of art from a pile of "scrap". you are a true credit to the art of blacksmithing Tim. keep up the great work!!!!! and you should make a square circle hammer like the one you got from Aec Steele for the 5k give away.
Hello Brandon thanks for all the kind words, I have only made small hammers in the past about 1 1/2 pounds is the largest I've ever done but I would like to give it a try, you may have something here, will have to see if time permits. Thanks for the input and thanks for watching.
I will have to agree, your skill set has really improved! Awesome job!
Thank you vernon, and thanks for watching.
Dmitry.. The guy from Ukraine use kerosene to clean all the oil and grease and as fluks, I asked him a few months ago And his answer: “I sprinkle flux (90% borax + 5% quartz sand + 5% charcoal powder) this is necessary for forging (forge) welding. The flux is alloyed with scale - the formed substance is sufficiently fluid and is easily displaced by deformation. In addition, the flux protects against oxygen and charcoal, carburizes the surface layer of metal - which lowers the welding temperature”.
Not much I can say that others have not pointed out or said. But I'd like to tell you a big THANK YOU! for making these informative vidios. you rock man!!
Thank you very much Brian, and I do appreciate you taking the time to check out the video. Take care of yourself and be safe.
absolutely beautiful! Awesome job Tim.
Great stuff Tim, very instructional.
you do outstanding work, I learn a lot from you.
Thanks Hugh, and thanks for watching I do appreciate it.
i really enjoy your videos! I appreciate your narratshtion a LOT! you explain what's going on well thank you and please keep them coming your greate!
Thanks Ricky I appreciate that very much, and thank you so much for watching, take care of yourself.
That press you made is bad ass!
Thanks Shane. And thanks for watching.
Thanks for your time and effort to make sure you give us a great videos . Awesome pattern, maybe a hammer for the give away and congratulations on being so close well earned Tim
Thank you Rick I appreciate the kind words, a couple of people have asked about a hammer for the giveaway, I'm not sure but I think I may give it a try and see how it goes. Thanks for the input and thanks for watching take care.
Thanks Tim, really enjoying your video's, very instructional. My home made coke forge works well enough for knives, but after watching your damascus video's I'll have to have another go at damascus.
Beautiful pattern and your skill with it is amazing.. I've seen so many people fighting the whole way. You were able to use so much of the steel its amazing. Adding the high carbon edge was brilliant and the "Flux soak" is such a creative solution! Bravo sir!
Thank you very much I do appreciate that. And thanks for watching take care.
You are doing a great job
That is beautiful my friend. I immediately thought of a peacock feather when I saw the pattern but "Peacock Damascus" just doesn't sound tough 😂
Thank you very much!
Great job friend i love your work hopefully one day i can be as good as you.
Thanks Jay. And thanks for watching.
Tim
Best pattern I have seen. Good job. Now make something to insure no voids.
Ralph
Hello Ralph, I'm on it, thanks for watching take care.
Awesome video, very informative and answers a lot of questions about why some people may have trouble with trying to forge weld chains. Really seems to be that inspections of the chain and cutting the chain is crucial. Might be the reason why I've seen the links just pop off when forging, I've also seen them not cutting the chain and just rolling it up and tack welding it.
Great video as always bud! You should get something in the mail by next week!
With the drawing, you could do a small kneck knife giveaway or something that I don't believe that you've done before. You could make a Damascus bottle opener or a Damascus leaf to put on your car keys.
Hello Phillip, sorry about the late reply it's been very busy here, I love your suggestions for the giveaway I'm thinking about a neck knife but I haven't quite decided yet. Thanks for all the kind words talk to you soon brother.
BIG DOG FORGE No worries! I watched your video this morning at 4AM, trying to sleep. You definitely have been busy! You have tong making down to a mini assembly line! The jigs you Come up with are so damn impressive! It was fun watching the tongs come alive! Dr. Frakentong!!!
You will have a few things to pick up at the post office this week :) I think you'll like it!
I've used weathered membrane cleaner as a solvent. It's used on flat roofs work like a charm
Great teaching video, enjoyed every minute.
Enjoyed the video, makes total seance to me! Me and my boss are in a composition to see who can make Damascus first. He's really struggling so I've just shared this video with him. I dont think he is getting it hot enough or cleaning the materiel properly first...
It sounds like an awesome competition, it's good to hear about this kind of thing these kinds of exercises really improve our blacksmithing skills. Good luck and thanks for watching.
Hey Tim, thinking of a giveaway idea. Some ideas I thought of were: a good chunk of a really neat Damascus pattern for someone to create their own project, a Damascus set of tongs, Damascus knife, or if there is another item you are pretty good at, do that as the giveaway. I think tongs are what folks really know you for at the moment. I follow Alex Steele and obviously he does hammers and similar tools for his giveaways.
Thanks for the input Bryan do appreciate it so much, I was thinking of a pair of usable Damascus tongs but will have to see. Thanks again and take care.
Tim,The Ukranian, Demitri, used 5% nitric acid for the chain and he said he uses Kerosene for cable Damascus. Either way, he seems to be consistently susccessful!Thanks very much for this, I have a few ready to forge for a couple weeks now. When work subsides, I'll post my process. Cross your fingers.Ron
Thanks for the information I've been experimenting with quite a few things and this gives me more to go on, and good luck with your forging I hope that goes well for you. If you'd like to send along some pictures I can show off some of your work in a video if you'd like. Thanks for tuning in take care.
wow! sick looking billet. great video. thanks
Thanks Michael, and thanks for watching.
Great video, beautiful outcome.
Thank you
Thank you very much and thanks for watching.
Beautiful job bro it will make a beautiful knife can't wait to see what you do with the billet
Thanks for sharing
Thanks Scott much appreciated, thanks for tuning in take care.
Awesome work mate. Love the pattern.
Sorry if this is inappropriate...but that billet is "wet dream beautiful". Nice :)
No worries man I get that special feeling every time I look at it myself, lol take care and thanks for watching.
Im thinking that timing chain might be easier to forge weld together as it has more links stacked together with less gaps. great video it came out fantastic.
Thank you Steve and thanks for watching.
Tim, great info on this video . I will be trying this again thanks for the great video.as always keep on forging, Sincerely, Martin Moldovan
That's one pretty billet. I'm going to have to try that
Hello Justin, have fun with it, thanks for watching and take care.
Flux helps with bonding and also gives the molten metal something to follow as its being smooshed helping seal and complete welds...a good example to watch on a big scale would be copper pipe flux then attatch it to another copper pipe but use a soldier...if you look inside youll see the flux as its melting and travelung give the soldier a path to follow as it travels and fills all gaps....same concept for forging steel it also clenses too helping remove impurities.
Thank you for sharing Tim!! Excellent work as always! :)
Hello Black Beard thank you so much and thanks for watching, take care brother.
I guess Im asking randomly but does someone know a trick to get back into an Instagram account..?
I was stupid lost the password. I would appreciate any tips you can give me
@Vincenzo Ayaan Instablaster :)
@Phillip Jaxson I really appreciate your reply. I got to the site thru google and I'm in the hacking process now.
Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
@Phillip Jaxson It worked and I now got access to my account again. I'm so happy:D
Thank you so much, you saved my ass !
Never thought of using the alcohol and borax method. I tried with wd-40 and got horrible results. Thanks!
Hello Ernest, alcohol and borax always seems to work for me. Thanks for tuning in and take care.
That is awesome! Very inspiring and I learned a lot. Thanks for sharing!
Thank you very much and thanks for tuning in.
great video! Thanks for all the great info!
Thank you very much sir I do appreciate that. And thank you for watching take care.
Great video. Patients is tuff to teach. Never thought about alcohol. No forge of my own yet but appreciate all your work. Wonder how that billet would look as motorcycle handle bars or levers. Thanks again
Thanks for tuning in Zane, I hadn't thought about motorcycle levers but that sounds like an awesome idea. Thanks for the kind words I do appreciate it, take care and be safe.
That is amazing. I really appreciate you sharing this, wonderful....
Tim, I think the Ukrainian is Shurap, and, according to Google Translate, he uses kerosene as a pre-soak.
Borax is very soluble in hot water. You might try dumping borax into boiling water until it quits dissolving (making a super saturated solution), and then soak the chain/wire rope in that.
Thanks for the info, I've been experimenting with quite a few new things lately I'll have to give this a try. Much appreciated and thanks for watching.
That's a really beautiful pattern. I just came across your channel....fascinating stuff. Thanks for sharing. :)
Seriously nice billet! I look forward to whatever you make with it...
(Sheffield Bowie!)
Hello Euel, thank you and thanks for watching.
thats badass tim! and thanks for teaching me something.
Thanks Jared and thanks for watching.
Nice another good view love the channel
Thank you sir, and thanks for tuning in.
Really great job !
Thank you so much and Thanks for watching.
Great results! Impressive.
Thank you sir, and thanks for checking out the video I do appreciate it.
Very cool work as always!!
Thank you very much. And thanks for tuning in.
Idea for the 5k subscribers - give away a set of tongs or a Damascus Bowie knife. Have a great day, Tim.
Hello Philip, Thanks for the suggestions I do appreciate that, I'm not sure that I'm quite good enough to do a Bowie knife for someone yet but I definitely have a few tongs laying around, thanks for watching my friend take care.
Just the fact that you don't wear gloves while welding tells me you've done these sorts of things for a long time!
I would burn my hand off xD
Can this be done without a power hammer? This turned realy nice, thanks for sharing...
As always very informative and damn nice work on that pattern. I had not seen anyone do the additional piece of steel on the end yet pretty cool. J
Thanks J. And thanks for watching.
I'd love to just have the bilit you made in this video!! It turned out so amazing that I think I'm going to have to start putting together stuff so I can try to do this but, with me being disabled due to spinal injuries, not sure if I'll be able to...
Really dig the commentary
great pattern in that bar
Thank you and thanks for tuning in.
Tq brp..nice content..May God bless you..
They put oil proof O rings in motorcycle chains to seal out the dirt from getting into the moving part of the chain. they are called sealed chains and are expensive 3 times the price expensive. but they really dont last much longer than a good chain. you just dont have to lube them