How To Remove Your 2006-2010 Dodge Charger Front Bumper Assembly
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- This video shows how to remove your 2006-2010 Dodge Charger Front Bumper Assembly. The only tools you'll need are: 10mm ratchet, socket & extension, and a flathead screwdriver or pry tool.
Here is a link for replacement push pins for the bumper: amzn.to/3Ag1gpH
Here's a link to an inexpensive pry tool set: amzn.to/3MQ5dXl
If this video helped, be sure to leave a thumbs up and subscribe to our channel for more videos. Thank you!
Our website: www.martinsuse...
Facebook: / martinsusedcarsllc
Twitter: / martinscarsllc
DISCLAIMER: WE MAKE NO WARRANTIES, RESPONSIBILITY OR LIABILITY, EXPRESS, IMPLIED OR OTHERWISE, REGARDING THE ACCURACY, COMPLETENESS OR PERFORMANCE OF THIS VIDEO. ALL VIEWS EXPRESSED IN THIS VIDEO ARE OUR OWN AND DOES NOT GUARANTEE RESULTS. ANY ACTION YOU MAKE FROM THE INFORMATION IN THIS VIDEO IS STRICTLY AT YOUR OWN RISK.
Thank you! I got new headlights without thinking twice and I saw the bottom bolt hole. I said bad words and didn't have a clue how to take the bumper off. After watching, I feel more confident that I can and also replace the grill for easier access for that too without needing special tools. Thank you!
About to add a halo kit to my head lights so thank you for this!
I'm missing bolts and nuts when I took it apart lol.
Lol me as well
I’m having to repair my front bumper and hood as well as the radiator. I’m not sure what all got damage but I hope I’m able to do most of it on my own.
Sorry to be off topic but does anyone know of a trick to get back into an instagram account??
I was stupid forgot the password. I love any tricks you can give me.
@Duke Gannon Instablaster =)
@Hezekiah Troy i really appreciate your reply. I got to the site on google and I'm in the hacking process now.
Seems to take quite some time so I will get back to you later when my account password hopefully is recovered.
@Hezekiah Troy It did the trick and I now got access to my account again. I'm so happy!
Thanks so much, you saved my account!
@Duke Gannon Glad I could help =)
Great video, just got one for my 2007 and never did it before
I'm bout to replace my headlights, so this video is helpful. Thanks a lot. Like and subscribed.
im doing my headlights and fog lights
I’m a new sub thank you for the great video sure helped me a lot thank you definitely coming back to you guys bless your hearts my brothers
Thanks a lot brotha it helped a lot
Thanks for the video! Helped a lot!!
Thanks
Thats great ...I have to sand and paint mine clear coat chipping away
Excellent video! Thank you. I got a question. I replaced my old bumper for a new one in a shop. Since they changed it, I think my bumper moves a little. It feels like if the bottom is loose. Is that possible? Thank you
I would check all of the places that the bumper attaches. Especially the bottom corners in the wheel well.
Thank youuu Sir!
I have 2 screws rusted in place that refuse to move and 2 screws that broke apart from rust.
Great job wonderful video
Do you think it is possible to put a 2014 bumper on a 2008 if I changed the hood and fenders?
This just to much work to get a bumper off🤦🏽♀️
I agree. I’m having second thoughts to just went to change out my grill and I have to take off bumper….😂😂😂
Hondas and chevys are so much easier then this!
Good work possible and communicate
Thank you
Can a 2007 bumper fit a 2010 charger bumper??? Asking for a friend!
Yes, it should fit.
This video didn’t show how to actually take off the last nut! I’m very annoyed right now because it’s really no access to that last nut without taking off the tire.
We didn’t take the wheel off. You can get to the last nut trough the wheel well like we did.
yea it just switched to the middle of it being screwed off
That last bolt Is a beast if not jacked up!!
for a second i was so confused why the intake manifold was backwards, before i realized it was the v6 model.
I crashed my entire front end and need to replace both fenders, hood, and bumper. And I need to replace the whole part that holds the radiator and the lights plus I have to either reconstruct the front frame because it's bent to one side or I need to saw it off on the points where it's bent and get an used new one and weld it on straight..now I have a 2010 dodge charger and found a 2008 from where I can get the parts from..I saw the video you made on the fenders and the hood should be easy.so should putting on the bumper and the lights..but can you give me some tips or advice on the front frame that holds the radiator and lights.also with the frame being bent to the side.what should I do? Im lost.I feel like it will be too hard.anything will help.thanks
Frame damage is very difficult to repair as a DYI project. Depending on the amount of frame damage, you may want to consult a repair shop that specializes in frame restoration. Everything else in your project is mostly bolt-on replacement.
So I bought a 10mm extension for my 10mm extension and it doesn't fit ???//
Next time bring the extension with you and make sure the ends fit while you are at the auto parts store. It will save you a trip back to return if it doesn’t fit.
Hello.. can you do a video on installing rail supports for the 2007 dodge charger srt8 front bumper cover? Thanx
where can i buy the 10mm bolts?
Try Amazon. They have all sorts of 10mm bolts.
@@MartinsUsedCarsCollectiblesLLC can they be any 10mm bolts?
When I put back those stupid nuts on the inside of the fender, I just finger tightened them for next time as they are a pain to remove.