£289 DIY Gutter vacuum

Panther Gutter Vac - guttervacuumsystems.co.uk/pro...
Gardiner WFP - gardinerpolesystems.co.uk/clx...
Gardiner Backpack - gardinerpolesystems.co.uk/gar...
(Hypo) Nu-clear pro - puresealservices.co.uk/produc...
Industrial Sprayer - puresealservices.co.uk/produc...
Broom - www.diy.com/departments/magnu...
Dustpan - www.diy.com/departments/magnu...
Sacks - www.screwfix.com/p/site-heavy...
Water tank - www.tanks-direct.co.uk/250-li...

[@ChrisAddis]

Great idea with the hose. The best fixes are often the most cost effective ones.

[@joevilas5196]

Mate I appreciate all you do and this video has helped me massively I'm not a fan of ladders and I bought the same vac and poles. What I did do is get a camera system bought from amazon and attached it to the top end. Been a while since I last messaged you. My update is this I'm in full swing of my business pressure washing and gutter cleaning and even conservatory roof cleaning all thanks to you thanks again. 😊

[@SMOUT_]

That's amazing Joe, I'm glad it's going well 💪🏼 pressure washing season is upon us!

[@ripvanwincle2258]

I had no idea gutter vacuum's were so useless thanks for showing mate.

[@thegadgetemporiumaustralia8509]

Got a solution for ya. I have a similar DIY gutter vac ive built here in australia. We also get some very thin gutter gaps with tiled roofs too. Go get some PVC pipe and a heat gun. Measure your gap and then make a variety of different attachments by heating the ends of the pvc pipe and making duckbills using grips or a vice. Thay way youll have a variety of duck bill attachments in the van ready for different sized gaps.

[@leebryantravels]

There's more to gutter cleaning than yiu can think.
Set up and pack up, cleaning the machine, access, over hang of tiles, putting up a camera or drone to survey and check how much debri and how thick debri is.

[@fensterputzernuernberg]

Use an wet old cloth and a screw driver to get into that tight guttering mate !! a lot quicker... push it down into the gap and use the screw driver to move it where you want once the cloth is in there.. In fact a wet cloth is really great for pushing debri and cleaning along the gutters...

[@SMOUT_]

Thanks for the tip!

[@noahnixon541]

Cool... I'm about to start making my gutter vac... so appreciate your video...
Not spending a grand on one when I can make one for a couple of hundred...
Will be very good for getting into the channel at the back of a conservatory where it meets the house 😅

[@leebryantravels]

Can be a bit awkward , ie if not much room behind you so you can't bring the pole back and getting the right angle but doable

[@davidkearin3622]

Maybe try one of those radiator paintbrushes, the long ones with the angled head

[@robertleedham2157]

great vac idea!

[@waynebreier1682]

Good job

[@SuperOlivier2008]

Nice cheap gutter vacuum well done

[@SMOUT_]

Thanks buddy, cheers for subbing

[@mazman8343]

Hi friend you can get fittings from aliexpress they screw on then use a heat gun

[@adornwindowcleaning7739]

Hose cuff - screws on anti clockwise - will then fit in the screwfix vac

[@SMOUT_]

I'll look into it thanks

[@adornwindowcleaning7739]

Shop around though!

[@craigbrassington8766]

What was the hose diameter please? Also I can’t see it in the links. Thanks.

[@SMOUT_]

50mm, the links are definitely in the description, you may have to expand the drop-down just under the video 👍

[@DiamondJoe_]

Just found your channel 👍 🍕

[@SMOUT_]

Welcome 😊