IKON MOTORSPORTS REAR DIFFUSER!!! Camaro SS Rear Diffuser Install!
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2021
- In this video I unbox and install the 3-piece gloss black ikon Motorsports Diffuser for the 2016-2022 model Camaro. This is an ikon Motorsports part but I ordered it through Next-Gen Speed. Don’t miss My funniest blooper caught on camera at 20:23 mark. Also, I want to thank each and everyone of you for commenting and liking my videos and for super smashing that subscribe button and helping the channel get to the biggest uphill challenge for any TH-camr, the first 1,000. To celebrate, I’m launching my website where you can further support the channel by purchasing a fully customizable JCS-CUSTOMS logo shirt! These are like the shirts you see me wear in almost all of my videos! You can also purchase vinyl stickers in multiple colors. Link to my site is down below. Also link to this product being installed is down below. Video times are listed below for specific video parts. Once again, thank you all! Road to 2,000 begins....NOW!
My Website:
www.jcscustomsshop.com/
Part Link:
nextgenspeed.com/shop/exterio...
Time Stamps:
00:38 Thank You/Website Announcement
2:11 Unboxing
6:14 Start of Install/How to Remove Bumper
15:22 Assembling New Diffuser
20:04 Reattaching Bumper
20:48 After Install Pics
#ikonmotorsports
#reardiffuser
#camarodiffuser
#camaross - ยานยนต์และพาหนะ
Thank you for your how to video, I bought the same for my 17 2SS that I’ve been waiting to install. ❤
You’re welcome! Awesome!
Real Dope vid! I’ll be tackling this install this month
Thanks! Good luck!
Glad to know everyone else is struggling with this install. Trying mine without removing the bumper. Not easy😐
Brooo that is a sick lookin diffuser 😃! Nice job Josh, BREHHH💪💪
Thanks man🔥
@@JCSCUSTOMS I gotchu brotha mane BREHHH 💪💪💪🔥🔥😃🤣
Solid video thanks for the help 👌🏼
Glad I could help!
Well done 👏
Thanks!
thanks for the video going to do this soon
Nice! Thanks for watching!
Did this install yesterday. So damn hard but in the end it worked out and looks good
Yes it is! One of my least favorite installs to do but totally worth it!
Congrats on the 1K!
Thanks man!
Looks good. Im going to order one now. Lol
Thanks! Do it you won’t regret it! Lol
Thanks for this video, I bought this exact diffuser for my 2020 1LT and as soon as my quad Borla Atak exhaust comes in I’m gonna attack this project with my boyfriend.
You’re welcome! Thanks for watching! Sounds fun!
Man, that was a Terrific Install.
Can’t wait for my 2SS 1LE to arrive before the close of June. I will be using this upload as a guide. Thank you
Thanks man! Glad I could help. Great buy by the way, you’ll love it!🔥
did ur 1Le arrive
I broke a connection on right side
behind tire , but was able to install. BECAREFUL.
@@harshanbajwa yeah picked it up July 6th last year brand new 4 miles on it. Reached 10k miles as of last week. Great fkn car dude love it
Thanks so much for this video. I was thinking of getting one for my 2023 2SS. Does it fit the way it should, no gaps or visible slots for the tabs? I read some reviews so I wanted to ask for your input. Thanks again, love your content!
Glad I could help. Mine fits perfect. There have been a few that have gaps, think it’s just luck of the draw
If the right side of my back bumper looks a little loose what could be the problem?
There are 2 versions of the IKON rear diffuser. You have the more aggressive of the 2 which I am leaning towards. Have you heard if one version sits better on the bumper than the other? Really want this to fit clean with no gaps.
I’ve had both versions, used the other on my old car. This one looks better, mine fit perfect but have heard a few people say they can’t get rid of the gaps in theirs. The other one fit pretty snug against the car, but in my case, this one did as well
Would be possible to install a new deflector without removing the fascia? Great video and thanks for helping us on this!
You can, but run the possibility of breaking something
Hey brother, great video. Do you know if it would fit a 2019 ZL1 1LE? im stuck on this diffuser and gotta have it for my maro!
Hey man, thanks! Unfortunately it will not fit the Zl1 or zl1 1le
Sick bro, I love what you’re doing with the car. What’s next?? Side skirts?
Thanks man! I really do want to do side skirts, don’t want to go the cheaper route this time though, the skirts I’m looking at are about 3x the cost of the ones I put on my other car😅
@@JCSCUSTOMS Lol what brand are you thinking? I’m gonna put some on mine too
@@jordanedwards35 I’m currently looking at the Extreme online store ZL1 style
@@JCSCUSTOMS it’s gonna look amazing bro. Good looks on the response. See ya on the next vid
@@jordanedwards35 yes it will man! Appreciate the support!🔥
Nice video bro. I wonder if you used stainless washers if it would keep those screws from piercing through
Thanks! Great idea!
Can you send the link where you plan on getting the smoked tail reflectors
nextgenspeed.com/shop/chevy/chevycamaro/2019/lighting-2019/smoked-clear-rear-reflectors-16-19-camaro/
Has anyone bought the Ikon motorsports Grille for the Camaro? I have to replace my lower grille insert debating the aftermartket grille vs stock grille?
Did u put those alligator clips back on? Mine just fell off and I didn’t even know what they were. I don’t think they’re crucial to have on but just curious.
I put a few back on, some wouldn’t go back on
Finally put mine on last night. Was a nightmare. Major problems at the part of putting the new one on the bumper couldn't get the tabs on the far left and far right sides to apply the alligator clip thru that big center plastic peice.
I just received mine today. Going to try and install tomorrow lol. I hear it’s a pain to install but I plan on removing bumper
@@iceduppatriot3856 oh... yea I removed the bumper and it was still a pain. I have no idea how much trouble it must have been with the bumper on
Yeah it is. My least favorite install for cosmetic mods
I just finished installing mine I did how ever noticed a slight gap after installing the bumper back onto the car. All clips are in place but the gap is still there on the corner of the bumper closer to the tail light. Has this happened to anyone one?
How and where exactly did you shave the clips for the new diffuser? I’m running into the same issue
The small clip located on the ends of the diffuser that slide into the pieces you have to attach, just shaved it thinner with an exacto
I just installed my diffuser, I was wondering were you able to reinstall all the alligator clips back on? I could not install two. One on the far left and one on far right. Behind the new design moulding, could not push diffuser back.
My old car I wasn’t able to, this car I was able to. I’ve seen where some people have left off the plastic OEM piece that slips over the metal bumper, and is attached to the back of the plastic bumper and it fits better. I done that as well
Are you telling me they didn't reinstall the Fascia Energy Absorber ?
Did toy crmeramic coat you car .?. the color is popping
Do you have the link to buy it brother.
I installed same one but little gap on both side
A lot of people seem to have that problem. Think it’s just luck of the draw as far as the mold of the part. Mine hasn’t had any gaps yet
How was fitment on your mine has a small gap where bumper curves ?
Mine fit surprisingly well considering the other one I put on my last car had small gaps. This one fit like a glove, no gaps
Luckily mine is black so kinda hides the gap , lol it bugs me but love the look
We’re you able to get all the alligator clips back on only two of mine seemed to line up
@@venomous4479 it would bug me too but it does look so good!
@@venomous4479 I only got two of mine back on as well
Did you ever get the Smoked Rear Diffuser Reflectors
No I just tinted mine
They sent me my reflectors ahead of the diffuser and I don't like the way they look. They don't look smoked Red and they look like more white to me.
At 18:57 looking at the edges, you can see that it isn't flush with the bumper (you can see the clips and see through to the other side, barely). This is the issue most people (myself included) have with the bumper not being a perfect flush fit. Did you ever manage to get it a more snug fit? To where you can't see through at all. Or barely (less than the mentioned timestamp).
I did get it to sit flush, it looks almost perfect now
@@JCSCUSTOMS What adjustments did you make to better the fitment around the edges?
Is there anyway to find out what size screws go on the side peices that connect it to the main piece? They were left out of mine and no one will respond to me by email or phone
Don’t think I know of one. They were tiny self tapping and maybe a centimeter long if that
Where did u order yours?
@@new_york_n_june-lll1543 I bought thru auto addicts terrible customer service. Buy from someone else. Ikon motorsports makes it and sells thru several sites
I found u on the road and sea red up ur youtube
Nice! Thanks for looking me up
Hello friend. I have a problem installing my diffuser. I tried to install but it stays that way. Do I have to remove everything to make it look good
I have found that removing the bumper can give the best fitment
@@JCSCUSTOMS Ph. Ok. Thanks friend. Greetings from Austin TX
Hi, would you be willing to sell your old diffuser? I’d like to purchase it! Great video also!
Thank you! Yes I’m selling it!
@@JCSCUSTOMS great! I Sent you a pm on Instagram!!
I feel like Chevy should’ve done better with the body style for the camero especially if your gonna keep the same style body at least make the bumper look good so when people pull up behind the car they’ll know your in a 2SS or better just like dodge got some what different looks for the scats and cats
Did they charge you shipping for your diffuser ?
Doesn’t look like it on my invoice, but they did charge a $4 shipping protection
thanks
@@glasser620 no problem!
I ordered rear louver from IKON and they jacked up the price after I ordered them.
Sounds like you got it just in time!
Thanks for sharing, I was gonna order one from them until I saw your comment
@@albertoguerra3995 and they do not answer there phone.
Did you notice a gap on the back when plugging it up?
No gap on mine but I’ve had multiple people ask the same because theirs did
@@JCSCUSTOMS sweet I’ve been thinking about adding the diffuser to mine but I saw in a review that there was a gap. I’m thinking they probably didn’t put it on right or they didn’t remove their bumper and tried to install it with the bumper on
@@SLEEPERtvOFFICIAL with all my research every person with a gap did the non bumper removal install
Just ordered one of these BUT they TAKE forever to Process and Ship! Will not be buying anything else from them 😒😒 are they short staffed?
You’ll like it! I don’t really know. Anything I’ve ever bought from them was at my house within a week. Could be the time of year being that they probably just had a big amount of orders come through during Christmas
@@JCSCUSTOMS thanks man!
You’re welcome!
Where located? Mine next
Alabama
Ummm, bro… why don’t u do any horsepower mods???
Hey man do you still have the stock diffuser? Would you be willing to sell?
i just took mine off, i’ll sell it to you
Yes and yes
I wish there was an easier way to be able to install one without the removal of the bumper. Bummer
You can still take it off without removing the bumper, but you do run a risk. I’ve seen people do it👍🏼
@@JCSCUSTOMS what’s the risk? your running a risk pulling your body parts out
I got the same one from Auto addicts. Terrible company. They didn't wrap the smaller side peices and they slid back and forth in the box during shipment. They will not respond back to me
Ahh hate to hear that.. I ordered some taillights for the 2019+ back In March and still haven’t received them. My first time ordering from them
As much as you’ve spent… you’d b halfway to a procharger or whipple…
Looks good however, im n I t brave enough to make all that effort and work ..
Thanks man, it’s not too bad!