You could get flight for darts ( the type played in pubs) you can get them in many designs and colours quite cheaply priced from sports stores. Also I noticed you blocked off the bottom of the handle - if someone was to use this device in outdoor setting you could store things in there, fishing hooks, line, batteries for a torch all sorts of things. them have it secured with a threaded pipe and cap end. Just an idea fella, good VT.
Neat and effective design. :) Also, just as a bit of constructive criticism, do you have access to surgical rubber or pallet bands for wood piles or any large, thick rubber like that? Bigger than a regular rubber band but still very flexible. Like on a regular slingshot. Stronger and longer lasting. Great video.
Why didn't u just slide a long metal cone casing onto the arrow tip ? Then u wouldn't have to worry about dislodging the nail. I think heating a nail, slicing the arrow, using glue and tape, is just....
That would work better if you were using primer b4 u use the cement especially bc ur putting a lot of stress on it and when pipe fitting primer is essential to getting a proper seal 🦭 lol
That is the next slingshot in the pipeline. I did make one about a year ago out of metal hangers. This time I'm aiming for PVC. You can check out that one here: th-cam.com/video/4C-csShbHNI/w-d-xo.html
I totally agree with you but for these two projects my aim was to make it from stuff I can easily find anywhere. In future projects, I plan to use something stronger.
Enes Coskun I have made one but it is not functioning properly. Will try to change the elastic band and will try again. But it appears that it will work. Many thanks for the idea.
Thanks for sharing. This does have some potential to be stronger. I think with some exercise bands this could very well be very powerful. You can also by spear gun bands that could be as high as two hundred pounds of draw weight. Thanks very much for sharing.
@@bryanyee7 I guess you could just make a hole in both side just big enough to slip the bigger band through then insert them far enough in and out the front or back of the PVC pipe and tie knocks in each of the bands so they are too big to fit through the hole when they need to be replaced or what ever reason you want to remove them either cut the knocks and pull them back through the holes or you could insert something into the hallow in of the bands to make them bigger then when you need to replace them just pull out the thing you got stuck through the hallow end of the tubes if you want this type of setup. There is better ways than this way I have fount. th-cam.com/video/FTCCSMOz3-o/w-d-xo.html
+unknown unkown That is exactly what I did in the following slingshot video. Check it out to see what happened: th-cam.com/video/6HTw2X63mTQ/w-d-xo.html
![[LIVE] นาทีนี้ต้องพี่ทนาย | ทนายแก้ว vs ทนายไพศาล | #คุยให้เด็กมันฟัง EP.47 (02/11/67)](http://i.ytimg.com/vi/HmquaO-PL_M/mqdefault.jpg)
You could get flight for darts ( the type played in pubs) you can get them in many designs and colours quite cheaply priced from sports stores. Also I noticed you blocked off the bottom of the handle - if someone was to use this device in outdoor setting you could store things in there, fishing hooks, line, batteries for a torch all sorts of things. them have it secured with a threaded pipe and cap end. Just an idea fella, good VT.
I just ran across your videos and I really enjoy them. Keep up the great work.
Thanks.. That means a lot :)
I used a longer pvc and added more attachments to make it look like a rifle
U can use exercise bands instead of rubber bands for more power
The bottom stopper in the handle, it is better not to seal it. Then the handle can be used as a pencil case. And to make a stopper with a carving
Awesome job! You're so talented
Your explanation is excellent. Thank you.
Thanks.. Highly appreciate that. :)
Neat and effective design. :) Also, just as a bit of constructive criticism, do you have access to surgical rubber or pallet bands for wood piles or any large, thick rubber like that? Bigger than a regular rubber band but still very flexible. Like on a regular slingshot. Stronger and longer lasting. Great video.
That's not criticizing That's a idea to help
Turn the nail around to make glass breaker the blunt end needs to hit the glass or use a screw with the blunt end hitting the target
Use a 45 degree angle on the handle it will make your grip much better. Good video, Thank you.
That is a good idea. I think heating up the T joint and then molding it into 45 degrees will do the trick. What do you think?
MiiBooth could u show the result in 45 deg
Dont heat the T joint, try WYE. See the link below :
www.clearpvcpipe.com/clear-pipe-fittings/wyes.html
Turn the nail around to make "glass breaker" arrows. The large head will hit and not bounce or slide.
That seems like something I should try.. watch out for my next video, you might find your comment highlighted in it..thanks for the suggestion.
Cristos Palabras niec
this is a rly rly rly nice idea !!
I'm thinking additional PVC on either side equal of the T and a smaller "barrel" end may improve accuracy, although pretty accurate as you have it
Why didn't u just slide a long metal cone casing onto the arrow tip ?
Then u wouldn't have to worry about dislodging the nail.
I think heating a nail, slicing the arrow, using glue and tape, is just....
Very very nice keep it up
That would work better if you were using primer b4 u use the cement especially bc ur putting a lot of stress on it and when pipe fitting primer is essential to getting a proper seal 🦭 lol
I'm so glad I got a power drill now! :D
That is fucjin cool!
Simple and cool
man is load it from the rear so that your not warping the fetching
good idea
Ótimo vídeo 🇧🇷👏👏👏minha única dúvida é como faço o nó no elásticos de maneira correta
Thank you for replying back to my comment,but can you please make a slingshot also that fires rocks or ball bearings.
That is the next slingshot in the pipeline. I did make one about a year ago out of metal hangers. This time I'm aiming for PVC. You can check out that one here: th-cam.com/video/4C-csShbHNI/w-d-xo.html
This guy sounds Polish. good video
Do you supply also... If yes, I wish to have one... Thnx.
Why don't you use stronger rubber for both of projects, like theraband it will give you better performances.
I totally agree with you but for these two projects my aim was to make it from stuff I can easily find anywhere. In future projects, I plan to use something stronger.
Enes Coskun I have made one but it is not functioning properly. Will try to change the elastic band and will try again. But it appears that it will work. Many thanks for the idea.
You should have made a targeting sight for the bow
hey look at taterwaynes sling rings it's pretty cool!
nice work !
Thanks.
miibooth, black tube bands would be stronger, then u could regular arrows !!!
Thanks for sharing. This does have some potential to be stronger. I think with some exercise bands this could very well be very powerful. You can also by spear gun bands that could be as high as two hundred pounds of draw weight. Thanks very much for sharing.
How would you even attach the exercise bands to the sides though in a way where they could be easily removed and replaced?
@@bryanyee7 I guess you could just make a hole in both side just big enough to slip the bigger band through then insert them far enough in and out the front or back of the PVC pipe and tie knocks in each of the bands so they are too big to fit through the hole when they need to be replaced or what ever reason you want to remove them either cut the knocks and pull them back through the holes or you could insert something into the hallow in of the bands to make them bigger then when you need to replace them just pull out the thing you got stuck through the hallow end of the tubes if you want this type of setup. There is better ways than this way I have fount. th-cam.com/video/FTCCSMOz3-o/w-d-xo.html
nice
Mii booth please tell me the diameter of the sticks u r using
مصاحبه دیدنی و فوق العاده سید محمد حسینی در شبکه کلمه kalameh tv راس ساعت چهار بعد از ظهر 20 بهمن. لطفا پخش کنید⬆️⬆️⬆️⬆️
.
Muy bueno
How is the pouch affixed to the ands?
Dip the tip in lethal poison
Thx sir i will try to make it by own
thanks to you I'm becoming a ninja🇺🇸
its amazing
Thanks :)
mind blowing
HEY TAKE A LOOK AT TATERWAYNES SLINGRING,IT'S A ARROW SHOOTER AND A HIGH POWERED SLINGSHOT....😊😊😊😊😊😊😊
What if you go hunting how are you going not to hurt anything but if you go hunting your going to hurt some animals
dont make it it is dangerouse i shot my self in my hand with a arrow fom it the effects was not good
that cool
In germany we call this: "läppsch"
What's the arrow speed and pull weight of the slingshot bow?
Wow..mantap.. I like that..
Best bro I love it bro
use flat head nails with the flat part out to break glass its the glass breaker
+unknown unkown That is exactly what I did in the following slingshot video. Check it out to see what happened: th-cam.com/video/6HTw2X63mTQ/w-d-xo.html
Top👍🏼👍🏼
amazing work
makes a video by marrying in the water with that harpoon
I like really
it's very good
awesome
Thanks
#makeyoutubegreatagain
Amazaing
Interesting, next make a semi-automatic airsoft gun please :)
That is an interesting idea..
Tq i wnt try it
Yes
nice video reminds me of that one video i made
Nice
Thanks.
thx
vary good
o h i just i want
U paint the tiles
Where we can get the skewer sticks
At any supermarket at barbeque section.
Thanks
Good Job God Bless!! try a flat head
Thanks.. flat head is a good idea. Seems like I've got a plan for my next PVC crossbow. Thanks.
Best of luck be safe.. God Bless!! :D
Could you just use slingshot bands
俺と同じ思考パターンかな、似たようなスリングショットだわ
Great job bro make pore🙏
Looks like a mini
uzi
Good
go to king of random he yoused the back of a bult for the glass
What's a wice
U r really awesome
Thanks :)
HEY IT REALY WORKT
good
Am I right guys and girls
واضح انك في السعوديه
சூப்பர்
Ok keren dan kreatif tentunya
very good night
iam buy
make a stronger one
I'm working on a stronger one now. I'll probably use surgical tubing for the bands and real arrows. Maybe even a whisker biscuits from a real bow.
MiiBooth k.
hi
Da um trabalho da porra mais fica bom
Nd I mean khan
Nice
ಎ ಮಸ್ತ
เท่
th-cam.com/video/2LL9prVdV3c/w-d-xo.html check this is also good
lousy
крута
Дякую :)
it's very good
Good