Homemade PIPE BENDER !?
ฝัง
- เผยแพร่เมื่อ 14 พ.ย. 2020
- My INSTAGRAM : / . .
MAX TOOLS :
www.kozul.hr/services/max-alati/
DASSY WORK CLOTHES :
www.dassy.eu/en-gb/
EINHELL :
www.einhell.hr/hr-hr.html
Unior Tools :
uniortools.com
If I have helped you and if you liked this creative video sure to subscribe and like the video;) I'd much helped me ...;)
...
Ako sam vam imalo pomogao i ako vam se svidio ovaj kreativni video obavezno se pretplatite i lajkujte video ;) PUNO BIH MI POMOGLI... ;)
Za poslovne upite: dadoskrbo16@gmail.com
For business inquiries : dadoskrbo16@gmail.com - ยานยนต์และพาหนะ
I think it’s a great built even if it’s not 100% it will work only thing I would add is interchangeable wheels for bigger sizes
Excelente forma de trabajar voy a ordenado muy ordenado muy limpio tienes muy buena herramientas todo excelente lo único que faltó fue una base de cemento en el patio para colocar la curvadora saludos desde Colombia
Apesar de ser tão jovem, porém muito sábio e incrível a tua sabedoria além de ser super organizado. Está de parabéns você é um excelente profissional.
I make this sort of thing but I make sure the pry bar swings up and down for leverage. Plus there should be absolutely zero wobble, jiggle, so that all your kinetic energy goes into the bend. Also I use a really Stout long pry bar lever, makes it a cinch no struggle. Especially when you have to do hundreds and thousands of bends,💥 that's my two cents. Great job by the way. The next one I'm building, bends to solid bars at once.
Very good. Then thinking of adding a big bottle jack with corded drill instead of a lever. Wanting to build my own exhaust system. Again thanks for posting.
You've got every tools every piece wow 👍
Nice build. Only concern I have is the welded center pivot. The plating on those commercial bolts makes welding them sketchy. Make the center pivot 5mm longer and pass it through the baseplate, then weld the head from the other side. That will send the bending forces through the shank of the bolt into the baseplate, instead of through the welds on the sides of the bolt head.
No pues... tienes un buen de herramienta.
¡ Tienes una ferreteria!
Yo a luchas tengo unas pinzas ☹ .
Pero exelente trabajo 😀.
Me gustó lo que hiciste.
Domaca pamet kad proradi iz radionice drago mi je kad vidim da neko radi sa apetitom vidi se da si perfekcionista nista ne prepustis slucaju.👍
Pozdrav iz Srbije
Potpuno se slazem da je veliko zadovoljstvo gledati mladog momka kako ima zelju i znanje za rad.
Ali od ovog momka bolji je momak na kanalu peChoO
Queria eu ter a metade das ferramentas que ele utilizou. Mas é inegável a habilidade do rapaz. Ficou muito bom o trabalho. Parabéns!!! Congratulations!!
Boa tarde! Gostaria de ter muitas ferramentas assim... parabéns pra você!
Straight onto business. That's what I call a workshop
Exelente maestro, no le doy un aplauso sino un millon, felicidades
Como de llama ese material redondo que esa para doblar los tubos??
Where did you get the roller dies frome i cant find those any where! Help!!!
CHECK A SCRAP METAL YARD, ALWAYS CHEAP FINDS! 🇺🇲👍✌️
Awesome! Im new to metal work... and would love a pipe bender... Gonna have to wait a whil longer before I can do anything like that!
The video was quite cinematic as if someone had written the screenplay. Didn't skip a second like I do with most videos. A very interesting and informative one. Keep it up bro. GBU
a very useful video, as long as people watch it, the more God's reward flows for you.
Very nice work!
Excellent!!! 😁👍Although, you might have to heat it with a torch to make it easier.
Отличная работа! Спасибо за видео!
Intelligent. Boss. Realy
Where can I get the pulleys?
The first construction of the new workshop, it is so much more rewarding to make your own tools 🛠
Ррр
П
Amigo buen trabajo gracias por subirlo
1)la chapa de 6 mm es fina de 1/2 para arriba
2)los tornillos no sirven ejes de 40mm para arriba
3) perfora la chapa de 1/2 la que pongas de base los clavas y solas por debajo
Te mando un abrazo muy buena intención mejora algunas cosas el concepto lo tenes 🇺🇾
Smart and effective!
O
hello where did u get those bender dies/wheels please?
Great little project, nice finish. Great video, thanks. 😊
This is fantastic, I wish to have a work shop like this with all these machinery, thanks for your good education. Watching from GH,
ฟฃฃวฃ
GOOD IDEA SO MUCH
Good videos tutorial next time boss 👍👍👍
good idea, the only bad thing is the axis of the main mold welded to the plate and of greater diameter, the best would be past and thicker, it is observed how it moves by the applied force.
nice but does it work properly on hollow pipe??. I mean clean bend??
I wasn't going to say anything, but with 7 million views, you have some responsibility to the people to be honest and point out that this does not work well and that it is far from idea. You are going to motivate people to purchase dies and materials to make this tool, and it will be a waste.
I can see from the video that the bends are not consistent (the radius is changing) and the bends are damaging the pipe, unlike a properly built bender. This was a fail, and should have been labeled as such... or at least pointed out that this was NOT idea and the results were not great. Instead you hyped it up like it all went to plan.
People. If you are going to bend different size pipe, you should be using the appropriate size die and follower. If you are going to bend more than one size of pipe with one bender, you need to have an adjustable follower or keep your follower close to the die to avoid kinking and other issues.
This would be a good video IF it didn't end giving the audience the idea that you can repeat this process and be happy with the results.
Well done, in my opinion, you just needed to make a 90-degree fold and another 180 to see how the curves will be.
llllllll
7
Cho tôi hỏi ! Vì sao khi tôi uấn ống kém lại bị gẫy mà không giữ được độ tròn của ống ạ ...
@@cuongnguyenduy8141 .
i follow Leandro Torneiro, an brazilian maker doing this project and must tell, this tool is awesome!
Trebas ga malo preraditi,jer ovako mozes savijati cevi samo do odredjenog precnika(fi). Jedan roler si trebao napraviti da se moze štelovati pa tako da mozes savijati i deblje cevi. Inace korisna stvar. Pozz iz Srbije 👋
Step 1 - have all the key expensive components of a retail bender tool...
Where did you get the wheels?
Good job. Did the steel need any hardening? Is it ordinary steel?
Hey man great job but I see a problem it’s flexing needs more reinforced and needs to be mounted to concrete not a wooden workbench
Very nice
Thanks 👍 Alhamdulillah
Good workshop..good work
It looks like it's made for 1 size of Pipe only.The rear anchoring back U shaped plate should have been made to accomodate several different sizes.
Otherwise I like how it has degree markings capabilities.
Dobra ideja,pravio sam sebi nesto slicno,ide to mnogo lakse uz grejanje
th-cam.com/channels/6ioKYOovUi9r8h4orOQ8pQ.html
alguien q m proporcione el precio y en dónde la pueda conseguir vivo en Chalco estado de México x favor
What happen to measure twice cut once?
Good idea! Thanks for sharing. Keep safe. Watching here in Canada
Looks like it would kink some thinner walled stuff though.. maybe if you took another pulley any cut it in half to use as the support part..
Where can someone by the round dye pieces at!!!???
welding on a wooden table is a bad idea bro!!! great bender
🙏Sir Excellent your job keep your blessing us 🙏 i from mumbai india
Genial, excelente tutorial
Fantastic!. But where to get those wheels?
Were you able to find any
@@johnnymcclurg9672 in a F1 race car?? 😋
Google Rollers with U Groove
where did the round discs / pullys come from?
They come from either working or having connections in the steel manufacturing industry.
Were those galv'ed bolts? I am no expert but I've heard it's dangerous to weld directly on zinc coating; you might want to grind it off and clean w/acetone prior to weld on anything zinced.
Excellent work,where did you get the pullies?
ALI JE LIDL PRAKSIDE PLAZMA DOBAR PRODUKT ALI GA VI PRIPOROČATE PROSIM odgovor i stvarno lepo delavnico imaš pozdrave iz Slovenie
How do you make the dies?
the tools are complete.. thank for sharing
Muito bem explicado. Parabéns
👍👍👍👍💯
LOOKS AND WORKS GREAT, THANKS FOR SHARING. CAN YOU MAKE A METAL ROLLER TO ROLL FLAT METAL PIECES? 🇺🇲🌞👍✌️
9oooo
you need thicker plate and a more solid handle. a few more bends and its going to bend or break
Boa tarde amigo
Pena que não é aqui no Brasil
Gostei muito do seu trabalho se fosse aqui eu ia mandar fazer uma dessa pra mim
Susesso no seu trabalho merece mil likes
Is this guy working inside a hardware store? 🤔
dads gonna be pissed ha ha bending his pipes up lol jp
from Algeria the first
Красава , просто быстро и эффективно !!👍👍👍👍
you prolly dont give a damn but does someone know of a tool to get back into an instagram account..?
I stupidly lost the password. I would love any tricks you can offer me
@Jairo Jake instablaster =)
Keep up the good work 👍
How're Parkside plants?
Muy bueno y muchas gracias por este video maestro.
11:38
11:38
Nice bender... Good job sir.
What is the name of that pulley sir..how can i buy that....thank you
If you want a pipe bender, you can contact me or watch my video.
love it your tools sir
Extremely good. Very beneficient.
.
Ottima costruzione, molto robusta, 👍👍
Nice work idol
Nice job.....would like to have one ...with variable clutches...
Excelente información gracias👍👍👍
Great work
Excelente...mis sinceras felicitaviones...desde Nicaragua.
00
Nice, where do I get the wheels ?
Roller with U Groove
Greetings, you can add a little bit of oil to make it easier to slide
Compro qual o valor?
Good fabricator nice job.
Yet another DIY'er who uses a vernier gauge as a scriber... puts me off straight away.
Guess what.
There are cheap ones... you cannot believe how "common" this practice has become. Yes buy a cheap caliper instead of a scriber compass.
Easy when you got All the tools 😂
Hello Doctor D S.
I'm Jessie from Philippines.
Nice work and video.
Will try to make this.
Useful for the beginners in DIY things.
Thank you for the informative video.
Great Job sir!
🙂👍
❤
Exelente maestro muy bueno
Well done 👍🏻
Nice uploaded frends
Excelente ideia , grato.
beautiful, thank you for sharing
My greeting from iraq
where do you get the pulleys from?
Thats exactly what I need to know I looking everywhere I can’t find it
@@panolatile3968 Nós temos muito dessas polias aqui no Brasil.
We have a lot of these pulley here in Brazil. And they are not even very expensive.
Do you really need one
@@cadinhoeumesmo2993 give me a model number I’ll try to find it online thanks
Un verdadero maestro ordenado y muy didactico
Interesting! But if I need to bend a pipe of 1/2 inch. Etc.?? What do I have to do?
Gool🔥
😍😍😍😍
MY HOUSE CONTAINER th-cam.com/video/9PX1Msrp2NA/w-d-xo.html ,,,,,,, BRAZIL ,,,,,,,,,,,
Thank you so much for this bender making technical education
Tooo samo tako nastavi imaš moju veliku podršku