The cheap small hand pumps for oil bottles are super handy, you can put a flexible hose into both ends of the pump for flexibility and also use it for removing fluids from power steering reservoirs and such.
It amazes me how many car friends with good recourses you have around you like painters tuners alignment racks all that. So blessed man. Keep up the great content
Yea man, Mikey helped me through some serious shit after my accident, it was shortly after his, and while learning to walk again i was watching his progress, and have been addicted since.
The G is sounding way better then before. personally I want to get a z1 touring catback exhaust with a resonator for my 350Z. I like the sound clips they have posted on their channel.
One little trick for pumping fluid into a diff, or haldex, or transmission etc, is to poke a little hole in the cap where you can jam in a hose that you then route to the fill hole. Then poke a hole in the bottle big enough for an air compressor nozzle, then slowly throttle the air to force it to flow through the hose in the cap. Just be careful with airflow as if you go too much at once, the bottle will explode lol
your vids always give me motivation just had my first drift event yesterday and linked the whole course in my stock miata. Your s13 drifting videos totally introduced me to drifting and made me find love for cars. Love your content keep it up. I love your positive outlook on everything and am now listening to this video while i wrap my miata.
The G is just like my A8 which is a luxury car I'm quite surprised that a g has the electric steering wheel and the same seat thing tim puts his phone in lol
Fun hack for removing old control, arms or ball joints before you break it loose from the conical seat just trim the cotter pin flush, hammer a socket onto the castle nut, and impact it off it'll just shear the cotter pin like its not even there. That way you don't have to worry about hammering cotter pins out. If you are reusing the ball joint for whatever reason it's very easy to drill the cotter pin out of a balljoint once it's separated from the knuckle.
Fun fact! PTFE or Pipe thread tape doesn't actually seal anything, it was designed for tapered pipe threads which seal on the thread taper and allows you to get a little more engagement. Because the tape is Teflon and has a low coefficient of friction, its actually classified as a lubricant to stop threads galling from contact.
They make adapters for 3in exhausts to adapt a standard flange to work with a donut flange. I have one made by grimmspeed on my Subaru. I’m sure they make something very similar for vq’s
Hey dude just a heads up, Harbor Freight sells a ball joint seperator tool I used to pull those cones off my stock ball joints (06 G35). Its about $20 but absolutely worth it not not use the aftermarket ones the new ball joints come with.
14:41 how i felt when i first got my g. buddy had a muffler delete and test pipes😂 took me and my buddy 9 hours to make a custom 3 inch y back, sounds great now
All you guys have too much fun - I'm jealous 😉. I'm an older guy of ** - won't say that right now, but to give you a hint my first car was a "Vauxhall viva estate hc" from GM in the UK. It was painted in beige with a brown plastic interior. On a hot day it would smell like burning plastic inside. Just Google this car name and see the pictures - it was horrible.
@prizzamike heres a great video idea for the gloria. Profile how its the perfect date car, take out franzy somewhere uber fancy, whole thing will be a writeoff cuz its for da channel 😀
I have a led just like tim, Except mine are purple (bc its a better color :P) I love watching your vids, It also helped me install springs on my honda fit, since you always advise to "Never Give Up)
I just have some questions. Do you do TH-cam full time or do you have a different job. ? I love your content and what you put out and that you do your own work and show you doing it. Keep up the work
U should try the power steering pump trick put a pipe in the bottle and one in the diff and spin the pump and it pumps it in 😂 did it once or twice and it worked ngl
I love the 4door G35, thanks Tim for Making G's Great Again!!
13:21 That transition was as smooth as D1 drift.
holy fucking shit, i didn't even notice it....
The cheap small hand pumps for oil bottles are super handy, you can put a flexible hose into both ends of the pump for flexibility and also use it for removing fluids from power steering reservoirs and such.
When does the paintjob come???
When views and subs go up,
Funds for the builds go up
Just working with what is available 🫡
Drop more merch!
@PrizzaMike u gotta do a 2g dsm build man
TH-camrs don’t just have all the money in the world they just like us too, nice things take time and effort and love
And matching wheels...un-match wheels looks rather jank...
It amazes me how many car friends with good recourses you have around you like painters tuners alignment racks all that. So blessed man. Keep up the great content
Really glad to see the ka getting some love from someone who’s competent, it’s one of my favorite blocks.
Thank you Mike and Tim for being wonderful human beings! I really wish to meet you guys one day.
same
Yea man, Mikey helped me through some serious shit after my accident, it was shortly after his, and while learning to walk again i was watching his progress, and have been addicted since.
always a good time when tim comes out!
Mike, all your crew is awesome but Tim has got to be my favorite you have in the videos. He's got some chill vibes. Love the content bro.
The G is sounding way better then before. personally I want to get a z1 touring catback exhaust with a resonator for my 350Z. I like the sound clips they have posted on their channel.
Z1 has got to be one of the nicest sounding exhausts for the VQ! great choice
if you wanna go single exit ISR is the move
I also have a p1 large in my miata and i swear its the most comfortable bucket seat ive ever been in! Good choice tim 👍👍👍👍
I love the funnel to hose to diff strategy. I always struggled with filling the diff even with a pump!
ive been yearning for you to drop a video
Dude you are dropping everything today 🤣
bro when you were showing tim’s seat i really thought you were talking ab that couch for a second😂😂
Shows how bright you are
You'll need to get a rubber pad between the jack and the car so the paint stays protected. Because the rear subframe looks a mint🔥
new merch drop with shiny chrome painted parts that says "so fresh and so clean" is something i think this community needs
I have a new appreciation for the g37 sedan I dig Tim’s car and never realized how rare of a spec his car is. Very cool.
One little trick for pumping fluid into a diff, or haldex, or transmission etc, is to poke a little hole in the cap where you can jam in a hose that you then route to the fill hole. Then poke a hole in the bottle big enough for an air compressor nozzle, then slowly throttle the air to force it to flow through the hose in the cap. Just be careful with airflow as if you go too much at once, the bottle will explode lol
It’s insane how much better an RB sounds.
Paint those two drift cars!💯🔥
The back of the Z looks so sick cant wait to see this thing finished
Yeah, I noticed on your last video that I was not subscribed anymore 😮 why it's happening? Thank you for your videos ❤
13:15 When i say this transition made my jaw DROP. Good Edits as always
Time for a shop for all you guys to share Mike.
Ownership is a good feeling.
your vids always give me motivation just had my first drift event yesterday and linked the whole course in my stock miata. Your s13 drifting videos totally introduced me to drifting and made me find love for cars. Love your content keep it up. I love your positive outlook on everything and am now listening to this video while i wrap my miata.
The G is just like my A8 which is a luxury car I'm quite surprised that a g has the electric steering wheel and the same seat thing tim puts his phone in lol
Man the 2040sx will be back guys
Sounds really good with the new exhaust
Fun hack for removing old control, arms or ball joints before you break it loose from the conical seat just trim the cotter pin flush, hammer a socket onto the castle nut, and impact it off it'll just shear the cotter pin like its not even there.
That way you don't have to worry about hammering cotter pins out.
If you are reusing the ball joint for whatever reason it's very easy to drill the cotter pin out of a balljoint once it's separated from the knuckle.
You can also try doubling up the gasket to get rid of that gap and add washers to the bolts
man this channel makes me want to get friends who like doing this shit too. i need a spotter to take my last words just in case.
Fun fact! PTFE or Pipe thread tape doesn't actually seal anything, it was designed for tapered pipe threads which seal on the thread taper and allows you to get a little more engagement. Because the tape is Teflon and has a low coefficient of friction, its actually classified as a lubricant to stop threads galling from contact.
Interesting!
@@PrizzaMike ✨ The more you know 🌈✨
They make adapters for 3in exhausts to adapt a standard flange to work with a donut flange. I have one made by grimmspeed on my Subaru. I’m sure they make something very similar for vq’s
Much love from Maine 🌲 Mike and all the boiz
love tims g35🙂
We would take and roll up magazines to stick between the jack stands and the car to protect paint/coatings.
I recommend a air hammer with the punch or also called drift punch attachment for stuck or rusty cutter pins , comes out every time 😅
You got great cars AND great music taste! You always make some off the best vids!
Awesome video again dude keep up the good work 😎 I enjoy watching all your videos please keep it up and going 😊
always good to see ur vids in my sub box
Hey dude just a heads up, Harbor Freight sells a ball joint seperator tool I used to pull those cones off my stock ball joints (06 G35). Its about $20 but absolutely worth it not not use the aftermarket ones the new ball joints come with.
More car rides with Tim❤️
14:41 how i felt when i first got my g. buddy had a muffler delete and test pipes😂 took me and my buddy 9 hours to make a custom 3 inch y back, sounds great now
All you guys have too much fun - I'm jealous 😉. I'm an older guy of ** - won't say that right now, but to give you a hint my first car was a "Vauxhall viva estate hc" from GM in the UK. It was painted in beige with a brown plastic interior. On a hot day it would smell like burning plastic inside. Just Google this car name and see the pictures - it was horrible.
@prizzamike heres a great video idea for the gloria. Profile how its the perfect date car, take out franzy somewhere uber fancy, whole thing will be a writeoff cuz its for da channel 😀
That bug looks like a crane fly
Man the zee REALLY needs some paint now :D
I have a led just like tim, Except mine are purple (bc its a better color :P)
I love watching your vids, It also helped me install springs on my honda fit, since you always advise to "Never Give Up)
I use 90-140w in VLSD it helps it lock up more consistently once hot.
I just have some questions. Do you do TH-cam full time or do you have a different job. ? I love your content and what you put out and that you do your own work and show you doing it. Keep up the work
That’s a cool G. I thought it sounded good before and after
looking great! you inspire me to also post my e46!
transitions so good haha
157 k subs and i still feel like this channel is underrated
The nicest g I’ve ever seen W
HE ACTUALLY MADE A G35 SOUND GOOD 😮
Love it Mike ❤❤ keep it up
The bronze wheels are just right on the 240zx
It is pretty crazy in a month it'll almost be a year since the one ole guy side swiped the z
12:50 is that a CRX in the background 😱🧐
ive got an aunto v35 coupe and have a manual swap just waiting for my mate to come back from holiday to put it in
U should try the power steering pump trick put a pipe in the bottle and one in the diff and spin the pump and it pumps it in 😂 did it once or twice and it worked ngl
When are you gonna fix the RHD integra? Love your videos keep it up!
will u keep the green color for the KAT-Z?
That’ll happen on them big jobs 😂 I say that all the time.
17:58 doubke up the gasket!
Or even puta good bead of high temp silicone
I wonder if a smaller diameter muffler tip would help get rid of that raspiness
❤ keep them coming bro 👌
Tim is getting a flame tune now
Perhaps a crackle pop tune? 😅
@@PrizzaMike AK47 choon
great vid dude
Way to cool I'm early love a Saturday morning with PizzaMike
Ohhhhh i need them stock G seats i hate my grey ones in my 6mt sedan
He need the resonated test pipes to make it sound good.
I think that now the G sounds similar tone-drone wise to a stock GTR in the mid of the rev range
Use heat for those ball joint cones they just fall off
How do you dispose those old engine oil?
Dang! Coulda just did a bit of heat and a flathead for the ball joint cone.
Uh oh I just put GL-5 in my evo 8, and I was wondering why I couldn't heel - toe so well anymore 😢, would it even help me to drain it and buy gl4?
Nice
GG
Sick Video
Thank You
That muffler got move like 5” inches
Is the Infiniti seat up for grabs?
have you ever considered getting some kind of muscle car id love to see that one day
Is Tim telling those black seats?
Stg every video u got some random fella interested in what ur doing
Does that diff oil have LSD additive? Didn't look like
The Car need some Rust repairs soon🙂
Drill broken cotter pins!
Does anyone know what website he uses for buying parts from japan???
crx in nate’s driveway?
peace !!!
A achieve the sound you guys want, get rid of the lth and put in some high flow cats
G35 with a 37 front?
i think that was a robber fly
My guy, I work on my car all the time
bit of a randome question but would prizzamike give me some music reccomendations
Check the Spotify playlist in the description!
@@PrizzaMike oh wow, never noticed that, thanks tho 😃
Might’ve been a robber fly
Iso na miata shell. Im in Illinois
Should’ve titled it tims episode