I can help speed you on the downspout build, first without getting on the ladder, build your top right back with elbows, one screw in very top elbow…. And connect right back to 10’ pipe… from there you can check your right back length without getting on the ladder. Straps should be on the wall already…then Flip over the down spout and place the top elbow about 1 foot to 18” from the ground against the wall, then whack the pipe on the gutter… the dent is where you cut and now you have an almost perfect downspout… The key to being efficient is building downspouts before you hang gutters, so when you hang your gutter, downspout is ready and when you put your gutter hangers in near the downspout, your straps are up and downspout is sitting next to the outlet.. and this minimizes your up and down the ladder and going around the house Hope this makes sense
@@user-pi5xo4og9dIt went well. Once I got started, and recall the notes I took from this video, it was easy peasy. Things fell into place as he described. Many thanks.
I like it all except those straps. I use straps cut off a scrap of downspout and 45 the edges. When I wrap it around the front of the downspout it matches the exact profile of the downspout and fully covers the connection seams. Imo it looks much nicer.
Thanks for the tips , great video. Could you tell me in this case the size of gutter and downspout you used ? Also the x cutout pattern hole , is that a tool for that ? or you did it based on the downspout size?
Interesting to see other "styles" of doing things. THANKS for your video. (thumbs up) I would have liked you to show us how you fabricated those wall brackets... out of downspout scrap, or flat metal, or???
You just gave me a great idea... The hell with the downspouts,just put on 2-3 ft. ext. and no more clogged gutters. Who cares what it looks like. It only has to work!
So I’m hooking up a gutter from the house into a IBC water tank using the original down spouts the installer man put in. One side is ribbed the other is not. Well the down spout angle doesn’t fit the angle to put into the tank, my question is ....do all ribs need to be the same ?? Meaning we need the extra angles?? (Curved) Cause the existing angles will not fit the down spout into the tank. Please help us resolve this issue.
If you penetrate siding… always caulk. Just in case. Wood rot is inevitable without it. This is the guy who attaches shit to your house crooked and calls it a day.
We used Nashua waterproof tape on ours and it hasn’t peeled back at all. Also used it on a water trough for the cattle due to a winter heater that rested next to it and it’s still holding after 3 years. Great Product!
Do you have to worry about the weight of the downspout on the siding? I want to redirect my downspout diagonally across the side of my house so it isn't going into my basement/neighbors basement (there's like a 2 ft gap between houses 😬). It's aluminum siding so it feels like it should be strong but I'm not sure if I also have to worry about moisture going in via the mounting?
Thank you for making this look easy. How would you turn it to the side of the house? I’m planning to install a deck across the back of my house. I’d like the down spout to spill on the side of my house. Will my connections hold well enough to the pipe? Are there better elbows to make turns? Like ductwork?
My downspouts are installed like this and it causes clogs at the downspout. Leaves get caught on the sharp part of the screws that were used to attach the elbow to the gutter opening. Anybody know of any alternate methods to install? I'm tiered of clearing clogs during rainstorms.
Good info, but never install gutters with screws the leafs catch on them and eventually completely block the downspout, Use rivets work so much better.
If your going to be on TH-cam please take time to reply to people’s needs with the questions they ask. We are up in years and are trying to do this project ourself. Blessings in your work young man.
Nice to see Pinkman straighten himself out after all he’s been through. Fantastic job Jesse!
LOL
That's so funny, I'm binging breaking bad right now.
I was thinking the same thing! Nice video.
I like your zero bullshit approach to TH-cam. You get it.
You fighting with the ladder is what makes this special
Haha right! 🤣👌
Ladders can be treacherous bastards. I had one tried to kill me a few years back.
@@scottholley4712lol
well done. pro. the angle idea itself on the extension was worth the watch.
Thank you! Glad it was helpful!
I had to do a repair on my downspout and had no idea...this was very helpful. Thanks.
Any video that you learn something new, is a good video. I learned something new today.
What type of screw are you using to attach the strap to the siding? Great video!
I can help speed you on the downspout build, first without getting on the ladder, build your top right back with elbows, one screw in very top elbow…. And connect right back to 10’ pipe… from there you can check your right back length without getting on the ladder. Straps should be on the wall already…then Flip over the down spout and place the top elbow about 1 foot to 18” from the ground against the wall, then whack the pipe on the gutter… the dent is where you cut and now you have an almost perfect downspout…
The key to being efficient is building downspouts before you hang gutters, so when you hang your gutter, downspout is ready and when you put your gutter hangers in near the downspout, your straps are up and downspout is sitting next to the outlet.. and this minimizes your up and down the ladder and going around the house
Hope this makes sense
can you make a video about it? didnt undertand
Thanks bro...that took less than 15 minutes.
Now, it time for me to tackle mine.
You got it!
How did it go?
@@user-pi5xo4og9dIt went well. Once I got started, and recall the notes I took from this video, it was easy peasy. Things fell into place as he described. Many thanks.
I like it all except those straps. I use straps cut off a scrap of downspout and 45 the edges. When I wrap it around the front of the downspout it matches the exact profile of the downspout and fully covers the connection seams. Imo it looks much nicer.
Reply to Jeff Abercrombie....was trying to figure out sequence...thanks for sharing
What screws are you using for the X out, and what svrews are you using for the joints?
Thanks for the tips , great video. Could you tell me in this case the size of gutter and downspout you used ? Also the x cutout pattern hole , is that a tool for that ? or you did it based on the downspout size?
When you attach the elbow to the gutter drop, do you you make pilot holes first? What's the best when in drilling that? Thanks!
Interesting to see other "styles" of doing things. THANKS for your video. (thumbs up)
I would have liked you to show us how you fabricated those wall brackets... out of downspout scrap, or flat metal, or???
Cut a 2-4 inch piece of downspout, you should now have a aluminum bracket, cut the seam on one side and you've made yourself a gutter strap
Great way explaining step as you go. Do you have to seal at all where the screw attaches to the house?
There will be rot later. Shoulda just used the same holes.
You just gave me a great idea...
The hell with the downspouts,just put on 2-3 ft. ext. and no more clogged gutters.
Who cares what it looks like.
It only has to work!
What do you mean
THANK YOU. Very thorough!! I am ready to pull this off on my own :)
I liked the idea of measuring horizonal then taking off the five inches.
Thanks for the video. Do you like the clips better than the straps?
Great video. Is that a special screw that has a white cap?
Thanks! Good detail, well explained! Thanks for sharing.
Thanks for sharing. Is the pipe a 45 degree angle elbow from the rain outlet and another 45 degree elbow down on the wall?
great in a perfect scenario how about the downspouts are two long? or two short?
Thanks for the great video! You make it look so easy.
Can you cut the downspouts with a regular 40 tooth carbide saw blade?
Yes just run it slow tell you get a feel for it! Also keep your hands away👌
So I’m hooking up a gutter from the house into a IBC water tank using the original down spouts the installer man put in. One side is ribbed the other is not. Well the down spout angle doesn’t fit the angle to put into the tank, my question is ....do all ribs need to be the same ?? Meaning we need the extra angles?? (Curved) Cause the existing angles will not fit the down spout into the tank. Please help us resolve this issue.
how did you cut all these stuff?? the whole up at the gutter and down the end of the pipe?? thanks.
what do you use if you wanted your run at the end to go towards the closest corner so that run off goes in a different direction?
What size and type of screw do you use??
What about the old screw holes in the house that you put plate over? Not worry about water getting behind the siding and rotting over time?
Ive definitely never hear of it happening. I have had homeowners ask me to caulk them, to there request I did.
If you penetrate siding… always caulk. Just in case. Wood rot is inevitable without it. This is the guy who attaches shit to your house crooked and calls it a day.
We used Nashua waterproof tape on ours and it hasn’t peeled back at all. Also used it on a water trough for the cattle due to a winter heater that rested next to it and it’s still holding after 3 years. Great Product!
I really liked this video!
What screws do you use for the entire job?
Inch and a half for the hangers and zip screws for Downspouts
@@onegutterguy560 thank you
@@onegutterguy560 some recommend 1.5" screw to attach to house instead of 1". Would that work too, or is it too long for vinyl siding?
@@domilion2008 that's what I use for the Downspouts straps and hangers!
You want it long for vinyl siding so you can catch some wood behind the siding.
What time of screws did you use?
They are call zip screws with a 1/4 nut driver
Really great video man, thank you so much
No problem. Glad it helped!
Do you have to worry about the weight of the downspout on the siding? I want to redirect my downspout diagonally across the side of my house so it isn't going into my basement/neighbors basement (there's like a 2 ft gap between houses 😬). It's aluminum siding so it feels like it should be strong but I'm not sure if I also have to worry about moisture going in via the mounting?
Your fine. I screw into vinyl siding all the time.
Thank you for making this look easy. How would you turn it to the side of the house? I’m planning to install a deck across the back of my house. I’d like the down spout to spill on the side of my house. Will my connections hold well enough to the pipe? Are there better elbows to make turns? Like ductwork?
Yes the elbows i used were A elbows B elbows turn to the side
I also have another video about Downspouts if you want to check it out!
How did you do the whole punch? please show
Great video. Thanks for sharing
Are those screws or rivets that you use to bind the downspout to the gutter?
Rivets or screws do not matter. Screws are easier for diyers.
great video. Thanks!
You're welcome!
My downspouts are installed like this and it causes clogs at the downspout. Leaves get caught on the sharp part of the screws that were used to attach the elbow to the gutter opening. Anybody know of any alternate methods to install? I'm tiered of clearing clogs during rainstorms.
Are they the smaller downspouts 2x3? Rivets are a alternative
Very nice
Thanks
Thanks man. It was helpful
Glad it helped
So very helpful, thank you
This was great thanks man
No problem!
Outstanding
Thank you!
Minus 5 inches on PVC too?
Good info, but never install gutters with screws the leafs catch on them and eventually completely block the downspout, Use rivets work so much better.
Did you use drywall screws to mount the straps?
No drywall screws
I used inch and a half 1/4 nut screw
That hole punch is cheating. Haha, nice work.
Cool, ty
Your welcome
Nice!
Thanks
FINALLY! Some one measuring it our way 😪
Thanks
Thanks, you just made me 600.00...LOL
How does he not strip the screw hole when he's hitting the impact each time, lol.
Jesse? That you?
Haha nope
👍✅
If your going to be on TH-cam please take time to reply to people’s needs with the questions they ask. We are up in years and are trying to do this project ourself. Blessings in your work young man.
Use the right you're if you're going to criticize someone.
I would run the downspout down the trim board
1;10
Lol
Is this a joke? None of this was done correctly?
😂420th
This guy putting screws into wrong place . Leafs will get stuck and clogged up fast 😂
Well the ones at top will prevent larger objects like small broken section off shingle from getting stuck further down inside elbow of pipe
🤣
Where do you recommend the screws?
Where else would you put the screws? You criticize this guy then offer no solution. Ill trust the guy who does it for a living
What screws are you using to screw it into the X out and the remaining joints?
WWG1WGA 🇺🇸♣️❤️🔥🌬💯🖖🐸🤳