2019 Dodge Challenger 1320 (Passenger seat/rear lower removal)
ฝัง
- เผยแพร่เมื่อ 24 พ.ย. 2019
- Lets take out the passenger seat and rear seat bottom. Now your airbag light will come on with the passenger seat out but it is OK. Once you put it back in it will go away.
- ยานยนต์และพาหนะ
Up north here we race in much colder weather then 60 hahahaha - you can get that beast in the mid 11's w/ the right DA
Actual instruction starts at 2:00
Thank you for making this video. I found a few videos about removing the back seat but this was the only one I could find about removing the passenger seat.
Thanks for watching, plenty more tips and tricks on here. Glad it helped out
In my experience the vynal piece would need to extend from the lowest part of the black portion of the bumper cover up to approximately 6 inches above the bottom of the quarter panel. I recently installed Spohn adjustable control arms and had camber set to zero. Now the tires have much better contact and a small amount of rubber from the burnout even lands on top of the trunk lid. BTW, the back seat bottom weighs about 11 lbs and the top weights about 39 lbs. but removing it makes for a noisy ride. Hope you get to race soon we are done until March 😪
Thanks for the info!👍🏼
Great vid brother
Cool,great for my dogs😁
The 1320 package comes with the rear and front passenger seat already deleted.
Is there a noticeable difference in driving without the seats, spare tire setup and rear tray cover?
Not really, I did not notice enough of a difference to do it again. Effort Vs Gain is not there for me.
Thanks
Just for the info in my Charger the front pass seat was 60# and the rear seats were 45#.
Thanks bud
Let me know if you have any questions, thanks for watching!
Quick question if I wanted to run the passenger seat out all the time will the airbag light be on or is there a way to buy pass it
Yes you can buy a bypass, scavenger1320 on TH-cam has a video with a link to purchase. Hope that helps
Hey brother, would it be safe to put a cold intake on my challenger v6. Not for race or show, just so it could breathe better?
Yes
The top portion of the rear seat weighs the most
Destroyer 1320 you can do a lot more weight reduction on these cars I have a 392 charger and have pretty much weighed everything I could take off lol . Another huge gain is the battery you can save well over 40lbs there . Also dragpack on my car was worth 80lbs , driveshaft was 13 lbs list goes on lol . I’ll be watching the channel hope you get some good times with the car .
Do the airbag lights go back off when you put the seats back in? Or does it need a reset?
Yes they do
@@Destroyer1320 yeah I removed the passenger seat, kept the rear bench since its 9lbs and rear right upper bench panel, replaced driver with rci poly 8000 with a cover and race harness, ordered schroth pads to go over them so cops leave me alone haha. , it will bolt to the top of the stock slider on the passenger seat, all in all saved 145lbs. Spent only like 150 on seat, cover and harness! Best bang for the buck. Passengers ride in the back, haven't had a complaint :)
@@xhamilton91x Kick ass man!!
@@Destroyer1320 so far the sxt project. : passenger seat delete, driver seat swap for rci 8000 using passenger side slider and bracket and fabing up a top bracket with steel square sign tubing. Used cheaper matrix 4 point harness and ordered schroth seatbelt cover pads so if I get pulled over. I can drop the schroth belt logo and name to avoid a ticket haha.. "-125 lbs". Rear bench left passenger and cup holder delete "-21lbs". Rear tire tray and tool "-50lbs". Muffler and res delete "-60lbs" "added flowmaster super and dc sport resonated 9 tips.7 10"+10lbs" and yes sounds great. Backpressure is adequate. Will be doing a high flow cat or full cat delete since I can here in indiana. Already did spoiler delete. And yes my cars black so I wire taped the holes. So what haha 😂
Waiting 2 days for my pcm, already got diablosport Intune 3. "+20-30hp on various band lengths".
Drop in knn filter
Next will be doing aluminum driveshaft -30-50lbs I read.
But just a few days ago I was cruising down the highway with my window down. A deer jumped into my driver window. Front quarter panel is trashed. Needs replaced will be ordering painted one soon. Driver door has 2 dents needs pulled. The major one is gone. And the roof has 2 small dents that need popped out. And need a driver side view mirror. My ded is 1000 so I will be fixing out of pocket "$350" all in all for replacement . Maybe a few hundred more for dents later. Will be doing bumper support deletes "-50lbs" when I replace my front driver fender it's all screwed up but bumper needs pulled for that so,
But also have 20 stitches in my face had to pull both my upper lips back together it split me too nose to lower lip all the way open. That was fun. Stitches come out in a week. Will be uploading my videos here soon.
With good tune estimating 350hp and only weighing in at 3500 aiming to get my 0-60 to 5 flat from just a tick over 6 stock. :) if calculations go well.
When I can will be changing out hood to fiberglass and hood pins and saving the 15 lbs. whenever I got $350 to blow. And anything else weight wise
@@xhamilton91x Wow glad your ok, that thing should rip! Can't wait to see the videos!
Happy Veterans day!. I have some questions boss!?
What's your questions?
Put your back it to it!l 😂Thanks
So I did the passenger seat delete,which is very awesome for my dogs. I love the car but now airbag lite shows,as of no heater or ventilation for my drivers seat. Anyone with ideas.
They sell a piece that plugs in and turns off the light. Go to challenger 1320 groups on FB and ask they have the part number.
Thanks!!!