Just installed a mini split in my garage/mancave this weekend, I'm sitting here looking at this remote in my hand wondering who the heck designed this thing. Everything is backwards
why would there be? these machines only cost thousands of dollars, why would you expect such an incredibly basic convenience out of their control interface?
Symbols are hard to differentiate & not user-friendly. Heat (sun) looks too much like Cool (a snowflake, which really looks more like a sun). They should universally standardize these.
The fact that none of Mitsubishi's remotes include a basic light to read the display at night is bonkers. Keep these units out of your bedrooms unless you want to wake your spouse every time you turn on the bedroom light to adjust the air conditioner.
After you change the battery, you need to reset the clock. To do this, there are two tiny black buttons next to the battery icon. Use a thin stick (almost the size of a big needle) to press the reset button. Then use the stick to press the clock button. Adjust the time by pressing on the time buttons. On mine there is a time button with an arrow pointing to the right and another one with an arrow pointing to the left. These buttons will increase or decrease the time on the clock. When the right time is set, press the clock button again with the thin stick. The clock panel will stop flashing indicating the clock is set. It took me a long time to figure all this out. Enjoy.
I agree, the interface was designed by mental patients. The "snowflake" icon resembles a ring of barbed wire, not any snowflake that I know off. There is an additional whirlygig icon, not covered by this video. I guess this icon means connect to tumble drier, who knows!
I did the same. Made sense to me...sun = hot right? I finally figured out how to get cool to come on. I shut all 3 units off then turn on #1. Not immediate gratification but within10 minutes it’s cooling. Then I turn on #2 and wait for it...yup. #3 just walk away and forget it . You might be waiting awhile
I’ve had this thing for over a year now and just found out it has a heater and dehumidifier. Wow. Thanks so much this is a life changer for me and my girl!
1) switch it on in the dark 2) start sweating because it's on the wrong mode 3) try to light up the display with your phone to find the cool mode 4) try to go back to sleep but instead wait till the room is cool 5) switch off Aircon and go back to sleep
@@danriver12345 I think these 3rd party control systems like advantageair in Australia found that gap in the market. Just because these Aircon manufacturers can't design proper remotes.
most frustrating unit of all time, at its super expensive price. so many problems. starting with the super dumb remote. not blaming the video here; it actually helped.
We have 5 Mr. Slims in our all wood "cabin". With the three different radiative barriers in the walls roof and floor plus three more under the crawl space the highest the light bill gets is $38. We also have tankless propane water heaters and glass top propane/electric stove and dual propane/electric ovens. Most people cry when I tell them our electric bill in the hottest months.
I cannot discern the "snowflakes" (AC) fro the "sun" (heat). The icons are soooooo tiny! They look the same. Very user UNfriendly! The low fan speed is stronger than the high fan speed. What? Designed by idiots.
First of all - if you have to make a TH-cam video for a flippin remote then you have already failed. I live in condominium - owner lady has long since tossed the manual - this Mitsubishi AC remote -has four main modes called I feel, cool, fan and dry. What the heck I “I feel” care to explain why poetry phrase on a remote ? And “dry” mode - will this Dehumidy while cooling or not? Because I live on hot n humid Bangkok and it does not cool in this mode then it’s no useless - but can’t tell and not waiting to do trial and error while I cook inside the condominium Then there is another “Fan” button - how is this fan button different that the Fan mode ? Shldnt this be called “Fan speed” button? Then there are three more buttons Vane, Wide Vane and Long. What’s the difference between vane and wide vane it terms of cooling and airflow ?? What’s “ Long”? Care to add another word behind just so I know if “Long” means I have a “long” way to go to before I figure out this idiotic device? This is precisely why Japanese manufacturers have lost their edge in recent years - product quality can only take you so far - They never hire outsider who would bring better product development and user experience. I would fire the guy who designed this remote. It has to be simple - so simple that a low tech grandma can use. Did I tell you that I am hardware systems design engineer!!!
I'm sorry you are dealing with this. I am in the same position but I laughed at your comment. Laughed because it's so true and worded perfectly. Hope you figured it out. I've been spending hours pushing buttons and staring at it noting what the difference is. Lame. The builders on my home picked the wrong unit. I have this downstairs and forced air upstairs by the same company as a whole unit BUT you cant run both at the Same time. Like what the hell?!!! I gotta pick one floor to be comfortable on?
Thanks so much! Just moved into a new apartment with three of these and absolutely no instructions from the super. Thanks to you, I'll be able to keep cool without running my bill up 😅
Any idea why my indoor unit sometimes blows cool air on the heat only setting. I have 2 indoor units and we wake up in the middle of the nigh in winter time because the house gets too cold from the units even though the temperature at the remote is set at 75 F
HOW TO SET FROM FAHRENHEIT TO CELSIUS AFTER CHANGING BATTERY: press up and down and reset (with a toothpick etc.) all at the same time. You're welcome.
We have a Mitsubishi model from like 15 years ago. In the Mode function there is an image above the sun picture (heating) what is this? It's not in the instructions and even you didn't explain what this does?
I just want cold air!! I hit cool and crank up the fan so I can hear when it runs. It blows about 5 seconds and shuts off then nothing. I have 3 units and 3 remotes in my house and they all do this. I've checked the symbols to make sure it's not on heat. I know there's a wait period for it to start up but it's been an hour. When it works it's great but it's a hit or miss. I give up :(
@@EddyG0rdo make sure it’s in the right mode. The first icon is square with arrows. That’s auto, 2nd is a sun it will cool the room, 3rd is a rain drop and dehumidifies, last is a snowflake and will warm your room. Put fan on 4 bars and set the temp a few degrees from what you want and it will warm (or cool) faster. It doesn’t turn on until it’s a few degrees from set temp so set it to 80 if you like it 75. Look at the green lights on bottom of unit. If one is blinkin it’s thinkin. It takes 10 minutes to think about it before it turns on. If the unit is doing it’s thing like it’s supposed to they are both solid green. Don’t expect immediate gratification. They don’t work that way. Hope this helps!
I set my mode to cool fan full blast.it beeps each time I push a button. The light on it light up, but it doesn't cool. It did once for 30 seconds the closed up. Help
my units are working fine, but I can't get a hold of anyone to help me. My units are on the main floor, 1 story home, the basement has none. But it's not super warm downstairs & I want to know how to fix this problem, help!
I have had mine for 3 years now and serviced. I just want to sh××× it. It won't heat when it's cold like really cold. It won't cool either. It's only a bonus room. Yes this was designed by mental patients. It also seems to run when it wants.. I'm about to just get a window unit.
Shucks. I've had this AC onlyunit 3 months now and was trying to figure out where it says automatic for cooling and fan. You say how to do it, but you didn't show it done, or how to do it. This didn't help.
Are you kidding! "Purpose of Video" to SHOW how to operate the control...so you skip over demonstrating the Fan...Why??...you say what it can do but you don't SHOW it, you don't demo. what the symbols mean?? What are you thinking?? Anyone can read the label "FAN" it doesn't help with the symbols. Don't you people have someone there that reviews a HOW-TO video before you put it out on TH-cam? Thanks for what you gave us, half of.... Now I've got to continue my search for someone who actually knows what they're doing.
I’ve set the clock but can’t figure out how to disable the start and stop timers! The on/off button is not doing anything, I just want to turn it on and off manually 😭. I’ve set the start and stop time both to 00:00 and the unit can’t be turned off!
Ok but how do i get the remote to actually turn the thing on. Press the timer button and the vane goes down blows air out for 5 seconds and then shuts off
@@spacecadet5859 ok so i figured it out after like 4 hrs lmao. Apparently, if you have multiple systems running at the same time with different settings (one blowing ac, other blowing warm) it wont work. I turned off the ones i wasnt using and finally got it to work
Two questions, 1) When using the dehumidifier, are the heating /cooling functions also still in play? For example, is the temperature setting relevant when using dehumidifier or not. 2) is there a way to raise or lower the strength of the dehumidifying, or is it just on or off, with no range in between. Thanks!!
Me too. I live in a humid environment and drive a semi. The purpose of the until was to help with humidity so the items I store Don't get messed up. I have left mine on the humidifier and came home 11 days later to a room at 55 degrees not 65? Please help!
@@tflo6198 set your normal heat/cooling temp normally and then Turn on the dehumidifier setting. It’ll dehumidify and once the temperature in the room starts to cool down or heat up (depending on what you put it on) it’ll turn the air or heat back on to essentially reset the temp in the room then it’ll start to be a dehumidifier again once it gets back to the og temp you set it on
HOW TO SET FROM FAHRENHEIT TO CELSIUS AFTER CHANGING BATTERY: press up and down and reset (with a toothpick etc.) all at the same time. You're welcome. I did that, but it does not work. Any other option? Thanks
Cannot adequately see the symbols, never mind use them. Totally frustrating. Even insane. Had to buy an electric radiator for heating and a tower fan for cooling. And still have this new totally ugly and massively expensive unit sticking out of the wall. No wonder it doesn't come with an instruction book. You're on your own.
Woke up feeling like I was sleeping in the actual outdoors like Leonardo Dicaprio in 'The Covenant", grabbed my faux fur and got layers on I'm so flipping cold. I don't like this unit smh. People could be getting frostbite before this stuff starts working. My place is very spacious makes no sense. I'm about to heat up some coals im a steel barrel in my own bloody bedroom it's that brick!!!
Not sure if anyone is monitoring this channel but I'll try anyway. I just received a replacement remote and the "Area" control button does nothing when pressed. I'v tried different combinations of features and nothing. Also, what is the i-see hole used for? I pressed it in with a wide tipped pen and nothing happened. I know I'm doing it correctly b/c I was able to set the time with no problems.
How do you set the system so by default the system will turn back on after a power surge or power failure? We get a lot of power surges and if we are on vacation, we come home to a HOT house because the mini splits stay off after the power surge. No technician can solve this problem for us.
Hi, I know it’s been 2 years but I know how to solve this for you. All you need is a backup/surge protector battery like this one www.dell.com/en-us/work/shop/apc-back-ups-650va-ups-battery-backup-surge-protector-be650g1/apd/a5547002/power-cooling-data-center-infrastructure?gacd=9646510-1024-5761040-266380031-0&dgc=st&ds_rl=1282786&gclid=EAIaIQobChMIt6T3jsDC8AIVpf_jBx177QpyEAQYBSABEgIKj_D_BwE&gclsrc=aw.ds If the power goes out, this will continue to power the unit until the power comes back on. Cheers
i ha te not have manual box on my wall and power switch a real one on unit just do not like the way crap is thought threw or lack of i need a unit made in 1986..oh be aware any thing with word econo is just that bs lol ill have fun making a custom control box fer this things
Mitsubishi Air Conditioners are Inferior quality products. It’s easy to breakdown due to fragile parts. I bought a Mitsubishi Air Conditioner MXY-3G28VA2 on Jan 2018. Now it's Cooling Fan, Control PC Board spoilt. The seller said it's natural damage. If a human die at his 70s, 80s years old, it’s natural ; but if he die at his 7 or 8 years old, it’s not natural, it’s abnormal. Obviously this is due to the poor quality of Mitsubishi Air Conditioners.
I bought a house w 6 of these beasts and the 3 older ones work great. The three newer ones work when they feel like it but refuse to do any AC work. Anyone know what the icon of a split unit with a funnel pointing down from it means? I can’t get it to go away on the three that don’t work for AC.
Ah nice! A comment that isn’t 2 years old that I can help with! I believe the symbol you’re referring to is the left/right direction control. That little unit symbol and the little black icons beneath it control wether you want the air to be directed to the left, center, off-center, right, and the “funnel” with the arrow between it means you want it to keep sweeping back and forth from left to right. Keep in mind it’s based on when you are FACING the unit. So if you are facing the unit, and you want it to blow to the left of you, change the setting on the remote so the little black lines below the “unit” symbol are to the left. Hope this helps!
@@tflo6198 Thanks for the reply! I found out the symbol that made no sense was a Smart Sensor that changed the setting if there wasn’t anyone moving around in front of the split. I am still battling these splits. And losing badly. I think the remotes may have been mixed up but they seem to have the right serial numbers. Frustrating. I use Mitsu splits in probably half of the places I stay when I am on vacation and never have a problem. In my own home they are a disaster.
Five months later…. If anything, I now hate the new Mitsubishi remote control even more. I did something that got the remote to turn on the AC last spring. It took approximately 70 or 80 tries spread over three days, but the AC finally started working! Not sure if I did anything differently when I got it to work, maybe I just exhausted the obstinate thing? Now I am trying to turn the heat on and my first 30 attempts yesterday and today have failed. My three old splits are working fine. My new ones are not. This time I can’t get the clock to set, it keeps blinking no matter what I do. Maybe the blinking means the clock is the issue? Mitsubishi is garbage. They had good remotes for decades and now they are trash. On edit: A couple hours later and 20 more attempts to get it to work, the split heat kicked in and started working like it was good to go. So I am set until next spring when I get to go through this again. Argh. The capricious nature of this thing is beyond irritating.
Removing humidity is the purpose of the dry mode. If I leave my unit in that mode it will get down into the liw sixtys in my home so i make a alarm clock set for one hour to turn the unit back to normal cool. I use the dry mode in the morning when the humidity is often above 90%.
I have the same remote and Mr Slim A/C but how come I do not have Heating Mode! is it possible that my unit does not have heating option although it is a new unit
Engineers always build stuff to make Maintainers learn new cuss words while fixing it. Usually it was McDonell Douglas ,Boeing ,and Lockheed Martin Engineers after 20+years on Aircraft and 4 years teaching young Airmen. Currently it’s a damn Mitsubishi slim unit the trouble shooting manual says see Dealer, who of course are out of business. Learning much more from TH-cam University
The only reason to watch a video like this is to know how to change setting that are NOT show directly on the remote... like HOW TO CHANGE FROM FAHRENHEIT TO CELSIUS ... and you fail at this ....
Alex Gauvin RIGHT?!?!? watched this boring video only to learn nothing that wasnt in the user guide. thanks. seriously thanks for making this useless video
The interface was designed by mental patients.
You might be right.
I’d say it’s quite possible
Just installed a mini split in my garage/mancave this weekend, I'm sitting here looking at this remote in my hand wondering who the heck designed this thing. Everything is backwards
Lol.
Bing bong
Thanks for showing what the fan button is for. Like we wouldn't figure that out for ourselves. What we need, it how to switch from dumb F to Celsius.
Is there any option to light up the display, it is really hard to operate during nights
why would there be? these machines only cost thousands of dollars, why would you expect such an incredibly basic convenience out of their control interface?
Symbols are hard to differentiate & not user-friendly. Heat (sun) looks too much like Cool (a snowflake, which really looks more like a sun). They should universally standardize these.
I have had this unit for seven years, love performance, above average intelligence but hate the symbols that are so hard to read and discern.
Had to watch this while at an Airbnb in Portland. Lol
Watching this at an Airbnb in bend
@@unlimitedshrimps it's as if it's the universal air conditioners for the Pacific Northwest. Lol
Is there a way to make it just a fan?
I needed this video. Thank you
The heat option pumps heat out extremely slow is there any way to speed that up?
How do you keep the system on...the vents keep closing and not blowing cool air.
Hi ..I change my remote battery but i want know how i change Fahrenheit to Celsius please show us to how to change this
My partner wasn't home and I accidentally put it on cold coming into winter 🙃 thank goodness for youtube huh
How to set the vane to stop moving on itself?? I'm so annoyed to awake with sweat all over my head
Mistubishi electric Wf eorr parbelm
When I set my mode to automatic it gives me to adjust from -6 to +6. Can you shed some light on what this does?
Joshua Masangcay my new ac remote has no light in display why ?
This is the worst remote I’ve ever used in my life. Useless.... just useless
Thanks for the vid, this remote is NOT intuitive!
The fact that none of Mitsubishi's remotes include a basic light to read the display at night is bonkers. Keep these units out of your bedrooms unless you want to wake your spouse every time you turn on the bedroom light to adjust the air conditioner.
Yea all I need is a "cool for 15mins" button. Try and do that in the dark.
Yes its the absolute worse. Turn on the lights to use the remote. Weird
Remote aside, I did not expect to find such a high quality video for this remote!
After you change the battery, you need to reset the clock. To do this, there are two tiny black buttons next to the battery icon. Use a thin stick (almost the size of a big needle) to press the reset button. Then use the stick to press the clock button. Adjust the time by pressing on the time buttons. On mine there is a time button with an arrow pointing to the right and another one with an arrow pointing to the left. These buttons will increase or decrease the time on the clock. When the right time is set, press the clock button again with the thin stick. The clock panel will stop flashing indicating the clock is set. It took me a long time to figure all this out. Enjoy.
Roderick Tang thx
Thanks couldn’t find this anywhere
Thanks! don’t know why they didn’t include this in the vid?
THANKS
Setting the clock was the only reason I was watching these videos. Thank you so much!
Love how I’ve pressed every button and nothing works lol
omg, you dont explain in the FAN mode what is the meaning of icon of the dude holding his ear?!?
Thanks for this video, it clearly explains all the options on this absolutely obtuse interface
Thank you! We moved into a new house and couldn't find the operating manuals, this was perfect
I agree, the interface was designed by mental patients. The "snowflake" icon resembles a ring of barbed wire, not any snowflake that I know off. There is an additional whirlygig icon, not covered by this video. I guess this icon means connect to tumble drier, who knows!
so true
@@FloatsOnSatellites Yes horrible graphics. Who dreamed them up ?
I been pressing the SUN mode for when its HOT, and cranking the heater. Blooooooody spewin. Thanks for video
akz SYD I l have been doing the same! 😅
Omg dumb
I did the same. Made sense to me...sun = hot right? I finally figured out how to get cool to come on. I shut all 3 units off then turn on #1. Not immediate gratification but within10 minutes it’s cooling. Then I turn on #2 and wait for it...yup. #3 just walk away and forget it . You might be waiting awhile
Cindy Z Sun = Hot = Heat = Die
I agree. The sun symbol does not obviously symbolise heating - something like a log fire with flames makes more sense to me.
I’ve had this thing for over a year now and just found out it has a heater and dehumidifier. Wow. Thanks so much this is a life changer for me and my girl!
i’ve been pressing too warm for when it’s freezing DUDE
1) switch it on in the dark
2) start sweating because it's on the wrong mode
3) try to light up the display with your phone to find the cool mode
4) try to go back to sleep but instead wait till the room is cool
5) switch off Aircon and go back to sleep
@@danriver12345 I think these 3rd party control systems like advantageair in Australia found that gap in the market. Just because these Aircon manufacturers can't design proper remotes.
Econo cool Raises the temp 6-8 degrees (that makes sense ?)
Eco no cool
He probably meant decreases temp by 6-8 degrees
Saves your money using that mode adding on only using cooling mode, normally used while sleeping.
most frustrating unit of all time, at its super expensive price. so many problems. starting with the super dumb remote. not blaming the video here; it actually helped.
Got 3 Mitsi air cons ,(best there is in my opinion) Still trying to figure those small symbols after 7 years ..each season I forget which is which.
We have 5 Mr. Slims in our all wood "cabin". With the three different radiative barriers in the walls roof and floor plus three more under the crawl space the highest the light bill gets is $38. We also have tankless propane water heaters and glass top propane/electric stove and dual propane/electric ovens. Most people cry when I tell them our electric bill in the hottest months.
I cannot discern the "snowflakes" (AC) fro the "sun" (heat). The icons are soooooo tiny! They look the same. Very user UNfriendly! The low fan speed is stronger than the high fan speed. What?
Designed by idiots.
Great explanation. The hotel I'm staying at has a wall unit with those silly controls
First of all - if you have to make a TH-cam video for a flippin remote then you have already failed. I live in condominium - owner lady has long since tossed the manual - this Mitsubishi AC remote -has four main modes called I feel, cool, fan and dry.
What the heck I “I feel” care to explain why poetry phrase on a remote ?
And “dry” mode - will this Dehumidy while cooling or not? Because I live on hot n humid Bangkok and it does not cool in this mode then it’s no useless - but can’t tell and not waiting to do trial and error while I cook inside the condominium
Then there is another “Fan” button - how is this fan button different that the Fan mode ? Shldnt this be called “Fan speed” button?
Then there are three more buttons
Vane, Wide Vane and Long. What’s the difference between vane and wide vane it terms of cooling and airflow ??
What’s “ Long”? Care to add another word behind just so I know if “Long” means I have a “long” way to go to before I figure out this idiotic device?
This is precisely why Japanese manufacturers have lost their edge in recent years - product quality can only take you so far -
They never hire outsider who would bring better product development and user experience.
I would fire the guy who designed this remote.
It has to be simple - so simple that a low tech grandma can use.
Did I tell you that I am hardware systems design engineer!!!
I'm sorry you are dealing with this. I am in the same position but I laughed at your comment. Laughed because it's so true and worded perfectly. Hope you figured it out. I've been spending hours pushing buttons and staring at it noting what the difference is. Lame. The builders on my home picked the wrong unit. I have this downstairs and forced air upstairs by the same company as a whole unit BUT you cant run both at the Same time. Like what the hell?!!! I gotta pick one floor to be comfortable on?
Thanks so much! Just moved into a new apartment with three of these and absolutely no instructions from the super. Thanks to you, I'll be able to keep cool without running my bill up 😅
Who else is on here bc this system is CRAP. THIS REMOTE DOES NOT WORK
Ours don’t even keep our home cool
I want to know, how to mute the beeping sound, quite annoying control it at night.😂
this is the most moronic, unintuitive remote I've ever owned. great machine, remote designer should be fired.
I can’t turn the unit on and my remote is flashing ‘Mon - clock 0:00’. I cannot reset it or work out why this has happened all of a sudden. Any ideas?
this remote is the biggest piece of crap I would never buy another system like this because it just won't work right
خوفك من التايهات
nz rockdj You’re*
nz rockdj you’ve gotta be some special kind of fucktard to be defending this garbage
@@thesenate4070 the remote's garbage but only dumb fuckers can't figure it out
@@nzrockdj Nice grammar. Ballsy comment, considering.
is it possible to remove the beep sound? every function i do, it beeps.. i want that off.
you think you can customize such remote controls like you can a computer?
There is NO "sun" on mine. Only the snowflake, dew drop and then 4 arrows in a a square shape with the arrows pointing counter-clockwise.
Any idea why my indoor unit sometimes blows cool air on the heat only setting.
I have 2 indoor units and we wake up in the middle of the nigh in winter time because the house gets too cold from the units even though the temperature at the remote is set at 75 F
Mohamed Maataoui yeah man these suck ass super hard!
The fan works but the heating dosent work why?
Naira Gatsby u have to let it run for about 30 mins before the heat gets hot. Kinda like water in the sink.
Im fucking freezing and if it doesn’t turn on right now I’m be fucking dead by the time it heats up
Cesar Carrillo SAME OMFG
Naira Gatsby I can’t t get the fan to work?
Go
HOW TO SET FROM FAHRENHEIT TO CELSIUS AFTER CHANGING BATTERY: press up and down and reset (with a toothpick etc.) all at the same time. You're welcome.
We have a Mitsubishi model from like 15 years ago. In the Mode function there is an image above the sun picture (heating) what is this? It's not in the instructions and even you didn't explain what this does?
I just want cold air!! I hit cool and crank up the fan so I can hear when it runs. It blows about 5 seconds and shuts off then nothing. I have 3 units and 3 remotes in my house and they all do this. I've checked the symbols to make sure it's not on heat. I know there's a wait period for it to start up but it's been an hour. When it works it's great but it's a hit or miss. I give up :(
You sound exactly like me right now!
I’m 1000 miles from home right now at an Airbnb. It’s 2am and I’m having the same issue. Can’t sleep. It’s keeping me up. Did you ever figure it out?
Do you want hot or cold?
@@EddyG0rdo make sure it’s in the right mode. The first icon is square with arrows. That’s auto, 2nd is a sun it will cool the room, 3rd is a rain drop and dehumidifies, last is a snowflake and will warm your room. Put fan on 4 bars and set the temp a few degrees from what you want and it will warm (or cool) faster. It doesn’t turn on until it’s a few degrees from set temp so set it to 80 if you like it 75. Look at the green lights on bottom of unit. If one is blinkin it’s thinkin. It takes 10 minutes to think about it before it turns on. If the unit is doing it’s thing like it’s supposed to they are both solid green. Don’t expect immediate gratification. They don’t work that way. Hope this helps!
@@zapyawhereithurts this is wrong lol. The sun is for HEAT, the snowflake is for AC.
how to stop it from going up every hour
Does the temperature have to be at a certain degree for the fan to run on heat mode
Good question
Anyone knows how can I stop the Air conditioning in a concrete hour? Help
can you program multiple operating windows e.g. cool from 11 pm to 1 am and then cool again from 3 am to 5 am ?
Need light in remote no screen on blowr
Same pbm. Is there any lcd display light option in the mitsubishi remote? Not able to operate it during night time...
how to" reset"?
Because , the. Intruction said, after.changing the. battery. press reset button, but our remote control dont have reset button
I set my mode to cool fan full blast.it beeps each time I push a button. The light on it light up, but it doesn't cool. It did once for 30 seconds the closed up. Help
Thank you so much for the simple instruction video! Much needed,was using the system wrong.
my units are working fine, but I can't get a hold of anyone to help me. My units are on the main floor, 1 story home, the basement has none. But it's not super warm downstairs & I want to know how to fix this problem, help!
I have had mine for 3 years now and serviced. I just want to sh××× it. It won't heat when it's cold like really cold. It won't cool either. It's only a bonus room. Yes this was designed by mental patients. It also seems to run when it wants.. I'm about to just get a window unit.
Shucks. I've had this AC onlyunit 3 months now and was trying to figure out where it says automatic for cooling and fan. You say how to do it, but you didn't show it done, or how to do it. This didn't help.
How do I knlw what the current room temp is?? Not the temp I’m setting it at…
Why would a cooling button raise the temperature?
Thank you for this, such an easy video to follow. Hope your company is doing well wherever you are located
covid probably put them out of business
i got an a ir conditioner and i have a question. how do i put the clock working?
The heater is shit its 20 degrees outside and I turn the heat up to 75 then 80 and it's still freezing my balls off
Are you kidding! "Purpose of Video" to SHOW how to operate the control...so you skip over demonstrating the Fan...Why??...you say what it can do but you don't SHOW it, you don't demo. what the symbols mean?? What are you thinking??
Anyone can read the label "FAN" it doesn't help with the symbols. Don't you people have someone there that reviews a HOW-TO video before you put it out on TH-cam?
Thanks for what you gave us, half of....
Now I've got to continue my search for someone who actually knows what they're doing.
All I wanted to know was how to use the timer. Terrible directions/ instructions. Terrible.
Perfect, simple and straight forward information. Thank you ❤
CHANGING TEMPERATURE UNITS AS PER THE MANUAL. REMOTE TYPE: KM09E.
Press RESET while the temperature buttons are pressed (both down and up arrows)
My remote is showing the timer only no mood or anything else appearing on the screen how can i fix that
I’ve set the clock but can’t figure out how to disable the start and stop timers! The on/off button is not doing anything, I just want to turn it on and off manually 😭. I’ve set the start and stop time both to 00:00 and the unit can’t be turned off!
Ok but how do i get the remote to actually turn the thing on. Press the timer button and the vane goes down blows air out for 5 seconds and then shuts off
Lol same here
@@spacecadet5859 ok so i figured it out after like 4 hrs lmao. Apparently, if you have multiple systems running at the same time with different settings (one blowing ac, other blowing warm) it wont work. I turned off the ones i wasnt using and finally got it to work
@@potatopotato9131 oh im going to try that too lol, mine still won't work :/
My remote skips over the heat mode. Why is that?
Thanks
16/7/24
You say the vane can be locked at a particular angle. Do you know how? We would love to lock it at the down angle.
How to use VANE option to lock ac flap in any certain direction ???
No backlighting
Thank you for this amazing video. I think it needs more autotune.
Two questions, 1) When using the dehumidifier, are the heating /cooling functions also still in play? For example, is the temperature setting relevant when using dehumidifier or not. 2) is there a way to raise or lower the strength of the dehumidifying, or is it just on or off, with no range in between. Thanks!!
Im wondering about this too..cant seem to find the answer anywhere..can someone help with this question..the number 1..
Me too. I live in a humid environment and drive a semi. The purpose of the until was to help with humidity so the items I store Don't get messed up. I have left mine on the humidifier and came home 11 days later to a room at 55 degrees not 65? Please help!
Anyone have any answers for this yet?
I'm just a dude not an HVAC expert but saw on a different video that the dude said NO the dehumidifier does NOT cool or heat.
@@tflo6198 set your normal heat/cooling temp normally and then Turn on the dehumidifier setting. It’ll dehumidify and once the temperature in the room starts to cool down or heat up (depending on what you put it on) it’ll turn the air or heat back on to essentially reset the temp in the room then it’ll start to be a dehumidifier again once it gets back to the og temp you set it on
"Econo Cool" raises the temperature by six degrees?
HOW TO SET FROM FAHRENHEIT TO CELSIUS AFTER CHANGING BATTERY: press up and down and reset (with a toothpick etc.) all at the same time. You're welcome.
I did that, but it does not work. Any other option? Thanks
The lock wane dosen't work. After an hour it rest to default
why is my remote not showing the temperature of the A/C on screen
Cannot adequately see the symbols, never mind use them. Totally frustrating. Even insane. Had to buy an electric radiator for heating and a tower fan for cooling. And still have this new totally ugly and massively expensive unit sticking out of the wall. No wonder it doesn't come with an instruction book. You're on your own.
Thank you so much, a child touched all the buttons and I didn't know how to set it...
Woke up feeling like I was sleeping in the actual outdoors like Leonardo Dicaprio in 'The Covenant", grabbed my faux fur and got layers on I'm so flipping cold. I don't like this unit smh. People could be getting frostbite before this stuff starts working. My place is very spacious makes no sense. I'm about to heat up some coals im a steel barrel in my own bloody bedroom it's that brick!!!
Not sure if anyone is monitoring this channel but I'll try anyway. I just received a replacement remote and the "Area" control button does nothing when pressed. I'v tried different combinations of features and nothing. Also, what is the i-see hole used for? I pressed it in with a wide tipped pen and nothing happened. I know I'm doing it correctly b/c I was able to set the time with no problems.
Thanks for the advise.. but you left out a lot of information about how to set the fan to different modes you mentioned, the time and other options.
Because it's a terrible and confusing system
THIS REMOTE IS DEISGNED SO BADLY ITS FUCKING FRUSTRATING
How do you set the system so by default the system will turn back on after a power surge or power failure? We get a lot of power surges and if we are on vacation, we come home to a HOT house because the mini splits stay off after the power surge. No technician can solve this problem for us.
Hi, I know it’s been 2 years but I know how to solve this for you. All you need is a backup/surge protector battery like this one
www.dell.com/en-us/work/shop/apc-back-ups-650va-ups-battery-backup-surge-protector-be650g1/apd/a5547002/power-cooling-data-center-infrastructure?gacd=9646510-1024-5761040-266380031-0&dgc=st&ds_rl=1282786&gclid=EAIaIQobChMIt6T3jsDC8AIVpf_jBx177QpyEAQYBSABEgIKj_D_BwE&gclsrc=aw.ds
If the power goes out, this will continue to power the unit until the power comes back on.
Cheers
Thanks for that
i ha te not have manual box on my wall and power switch a real one on unit just do not like the way crap is thought threw or lack of i need a unit made in 1986..oh be aware any thing with word econo is just that bs lol ill have fun making a custom control box fer this things
Mitsubishi Air Conditioners are Inferior quality products. It’s easy to breakdown due to fragile parts.
I bought a Mitsubishi Air Conditioner MXY-3G28VA2 on Jan 2018. Now it's Cooling Fan, Control PC Board spoilt. The seller said it's natural damage.
If a human die at his 70s, 80s years old, it’s natural ; but if he die at his 7 or 8 years old, it’s not natural, it’s abnormal.
Obviously this is due to the poor quality of Mitsubishi Air Conditioners.
I bought a house w 6 of these beasts and the 3 older ones work great. The three newer ones work when they feel like it but refuse to do any AC work. Anyone know what the icon of a split unit with a funnel pointing down from it means? I can’t get it to go away on the three that don’t work for AC.
Ah nice! A comment that isn’t 2 years old that I can help with!
I believe the symbol you’re referring to is the left/right direction control.
That little unit symbol and the little black icons beneath it control wether you want the air to be directed to the left, center, off-center, right, and the “funnel” with the arrow between it means you want it to keep sweeping back and forth from left to right.
Keep in mind it’s based on when you are FACING the unit. So if you are facing the unit, and you want it to blow to the left of you, change the setting on the remote so the little black lines below the “unit” symbol are to the left.
Hope this helps!
@@tflo6198 Thanks for the reply! I found out the symbol that made no sense was a Smart Sensor that changed the setting if there wasn’t anyone moving around in front of the split. I am still battling these splits. And losing badly. I think the remotes may have been mixed up but they seem to have the right serial numbers. Frustrating. I use Mitsu splits in probably half of the places I stay when I am on vacation and never have a problem. In my own home they are a disaster.
Five months later…. If anything, I now hate the new Mitsubishi remote control even more. I did something that got the remote to turn on the AC last spring. It took approximately 70 or 80 tries spread over three days, but the AC finally started working! Not sure if I did anything differently when I got it to work, maybe I just exhausted the obstinate thing?
Now I am trying to turn the heat on and my first 30 attempts yesterday and today have failed. My three old splits are working fine. My new ones are not. This time I can’t get the clock to set, it keeps blinking no matter what I do. Maybe the blinking means the clock is the issue? Mitsubishi is garbage. They had good remotes for decades and now they are trash.
On edit: A couple hours later and 20 more attempts to get it to work, the split heat kicked in and started working like it was good to go. So I am set until next spring when I get to go through this again. Argh. The capricious nature of this thing is beyond irritating.
What about the 38 symbols on the remote screen???
Are you kidding??? Econo cool means to raise the temperature... ? Too warm? Too cool? Just say warmer with an up arrow and cooler with a down arrow.
Does the temperature adjustment work when in the dehumidify mode? or only in AC/Heating. Thanks
Removing humidity is the purpose of the dry mode. If I leave my unit in that mode it will get down into the liw sixtys in my home so i make a alarm clock set for one hour to turn the unit back to normal cool. I use the dry mode in the morning when the humidity is often above 90%.
I have the same remote and Mr Slim A/C but how come I do not have Heating Mode! is it possible that my unit does not have heating option although it is a new unit
I still don't know how to set the fucking timer
My remote looks the same as yours, I do not get the quiet option, or the fourth bar for I speed fan . is there something wrong with my remote.
Engineers always build stuff to make Maintainers learn new cuss words while fixing it. Usually it was McDonell Douglas ,Boeing ,and Lockheed Martin Engineers after 20+years on Aircraft and 4 years teaching young Airmen. Currently it’s a damn Mitsubishi slim unit the trouble shooting manual says see Dealer, who of course are out of business. Learning much more from TH-cam University
The only reason to watch a video like this is to know how to change setting that are NOT show directly on the remote... like HOW TO CHANGE FROM FAHRENHEIT TO CELSIUS ... and you fail at this ....
Alex Gauvin RIGHT?!?!? watched this boring video only to learn nothing that wasnt in the user guide. thanks. seriously thanks for making this useless video
Alex Gauvin God bless her, my wife figured it out! hold the up and down button down and use a toothpick to press the rest button
MERCI!!!
Paul, it doesn't work. It just resets your remote