I do believe I have found my malfunction. In a honeywell jace there is no installed station on a new jace. Apparently on johnson there is. So I've been trying to log into the platform with your station credentials. Needless to say it fails every time. Should have picked up on that earlier..but I didn't.
Hello Boku! I'm deeply sorry for the late reply. I've been out of town for so long that I haven't been able to keep up with my TH-cam Channel. You will probably need FX Workbench to change the IP address. Once you open Workbench, login to your FX80 Platform and go to TCP/IP Configuration > Interfaces > Interface 1. In there you can change your IPv4 Address and subnet. On the top you can also change your Gateway. Hope this helps!
Hi there! What type of JACE do you have? JCI, Distech, Honeywell? If it's a Johnson Controls, when you commission your JACE it has some graphics preloaded. Let me know so I can give you a bit more information.
Hi Gary, thanks for your question. I have never tried changing them, but I believe that your current credentials are the same as your Windows Credentials. Now, if you want to change them, you may be able to do so if you go to Platform > Platform Administration > Update Authentication. But I must warn you that I have never tried, so at the moment I cannot assure you if it's going to work.
Hi L. Cross, no they are not the same for all models. I would say they are the same on JACEs with similar production dates. But I will not be surprise if JCI revise their passwords every couple years. You may need to look at the documentation that comes with the JACE. The program to load databases I use is JCI FX Workbench Pro.
@@l.crossjr You can also do it in FX Workbench. I currently don't have a JACE handy, but there is a place in Workbench where you can transfer files to your JACE, which allows you to transfer image files. I haven't done Graphics on JACEs in a very long time. But if you can send me a message on my website controlshero.com/ we can further discuss it.
Hello dear , Thank you so much really I learned lot of things from yours videos , I would like to learn graphics designing and Niagara software, could you give training to me I will pay money dear , it’s very important to me now I recently joined in Johnson controls I have prove myself here , I know commissioning at field side but workstation and graphics designs I don’t know, I really impressed with your videos
Hello Mahesh, thank you very much for your comment. I am glad that you are learning from my videos. About giving training I really can't at the moment, but you can go to my website. www.controlshero.com, scroll down to "Contact Me" and send me a private message if you have any questions. I will make sure I can cover some Niagara and graphics on my future videos. Thanks!
Good luck! Johnson fx80 are the biggest pain in the ass every time i touch them. Why you cant get in with the worbench or anything for that matter is just unacceptable.johnson sux
I do believe I have found my malfunction. In a honeywell jace there is no installed station on a new jace. Apparently on johnson there is. So I've been trying to log into the platform with your station credentials. Needless to say it fails every time. Should have picked up on that earlier..but I didn't.
Hi there! Good that you've found your issue. This video was solely for the Johnson Controls JACE.
Hii sir,
How can we know how many points available in a particular FX 80 controller?
Hi Sreeram, thanks for your question. I don't have the answer. I will have to look into a JACE and find out.
Can you change the IP of the FX80 so it won't be running on the default IP? I need to add a static IP
Hello Boku! I'm deeply sorry for the late reply. I've been out of town for so long that I haven't been able to keep up with my TH-cam Channel. You will probably need FX Workbench to change the IP address. Once you open Workbench, login to your FX80 Platform and go to TCP/IP Configuration > Interfaces > Interface 1. In there you can change your IPv4 Address and subnet. On the top you can also change your Gateway. Hope this helps!
Iam new to tridium, how you load a graphic or image package to the Jace?
Hi there! What type of JACE do you have? JCI, Distech, Honeywell? If it's a Johnson Controls, when you commission your JACE it has some graphics preloaded. Let me know so I can give you a bit more information.
Hi I was trying to get the software from Johnson controls do you know how to obtain the software so I can train on how to use it many thanks
Hi Patrick, to work with FX JACEs you will need the software FX Workbench, which again you will need to contact JCI to buy the software and license.
Hi , looking more videos about how to configure further Modbus , Bacnet IP, and Modbus TCP ...etc
Thanks for you feedback Marimuthu. Yes, as soon as I run into integrating those protocols, I'll do a videos on that.
Lot thanks to team
thank you.
Thanks for watching!
How do i change the factory default platform on my local platform?
Hi Gary, thanks for your question. I have never tried changing them, but I believe that your current credentials are the same as your Windows Credentials. Now, if you want to change them, you may be able to do so if you go to Platform > Platform Administration > Update Authentication. But I must warn you that I have never tried, so at the moment I cannot assure you if it's going to work.
Are the passwords the same for all Jace models?
Also, what program is used to load the database?
Hi L. Cross, no they are not the same for all models. I would say they are the same on JACEs with similar production dates. But I will not be surprise if JCI revise their passwords every couple years. You may need to look at the documentation that comes with the JACE. The program to load databases I use is JCI FX Workbench Pro.
@@controlshero Great. What about to load the graphics?
@@l.crossjr You can also do it in FX Workbench. I currently don't have a JACE handy, but there is a place in Workbench where you can transfer files to your JACE, which allows you to transfer image files. I haven't done Graphics on JACEs in a very long time. But if you can send me a message on my website controlshero.com/ we can further discuss it.
Helo , Can you sent the Damper program tn fx 80
Hello Ebin, sorry for the late reply. I've been out. What kind of damper program?
Hello dear ,
Thank you so much really I learned lot of things from yours videos , I would like to learn graphics designing and Niagara software, could you give training to me I will pay money dear , it’s very important to me now I recently joined in Johnson controls I have prove myself here , I know commissioning at field side but workstation and graphics designs I don’t know, I really impressed with your videos
Hello Mahesh, thank you very much for your comment. I am glad that you are learning from my videos. About giving training I really can't at the moment, but you can go to my website. www.controlshero.com, scroll down to "Contact Me" and send me a private message if you have any questions. I will make sure I can cover some Niagara and graphics on my future videos. Thanks!
That is why I use only Metasys. Kinda a pain in the butt
Hi Tom! You are right! Tridium/Niagara is not friendly at all, but it seems that is where the industry is heading!
Good luck! Johnson fx80 are the biggest pain in the ass every time i touch them. Why you cant get in with the worbench or anything for that matter is just unacceptable.johnson sux
Hi! What can I say. There are always good things and bad things between manufacturers. Controls is a tough field but very rewarding.