At 3:00, when you're talking about co-processors and molecular assemblers, that information is inaccurate. In order to fully utilize the speed of the extended molecular assemblers, you need about 32 co-processors per pattern provider/assembler ratio. So in your setup you have 3 or 4 molecular assemblers per pattern provider so you would need 96-128 co-processors in a crafting cpu. Co-processors don't relate to how many adjacent devices but rather the speed that the recipe batch is sent.
I also just noticed he was cancelling out the default recipe for Applied Mekanistics. Since that one uses the gas form. He was replacing it with the actual enriched material.
Wait that's a thing? You can store the extra stuff from the infuser in gas form in me system? But how do you passively keep an amount of that chemical?
@@pac4sset up an infuser with a recipe like “enriched redstone -> 80 redstone infusion chemicals” and import bus the result IIRC. Then use recipes as normal with default AE2 pattern providers since items and infusion chemicals can both go through the same side. Advanced AE is great don’t get me wrong, but in this case it solves a problem people only make for themselves by over complicating infusion / mekanism’s sidedness.
i'm always so happy when i see your notification pop up, a 12h shift is going to end shortly and i have some good entertainment for dinner, thank you for keeping me entertained, i'm really hoping this season keeps going fo a while!
I found this helpful I've never touched on AE and always done refined as it's simpler in respects to channels, I now have advanced patterns setup and working thanks to this :)
U can always disable them with a simple command if u don’t feel like dealing with the extra challenge channels provide. I’ve used AE for years with channels, but some more recent playthroughs i’ve played without channels and it was pretty nice not having to worry about them.
Always love watching these, and I found the amount of tech very nice. Not too complicated but it’s always nice to watch how other people set their stuff up
I love these little helpful tips you drop now and again. I didn't know you could specify block faces to use with the advanced pattern providers. I've been using the stocking feature in laserio to keep the enriched resources in stock in their respective infusers but this is very elegant.
Those arrows on the pattern providers! That's what has been wrong with my automation of them! (I know you pointed them out before, but I never correlated that to the purple ones and the issues I was having with them. Thank you for your videos, fun, and informative.
To be quite honest: Besides some of the magic mods like Ars Nouveau or Irons Spells, I tend to lose track when it comes to stuff like AE or Mechanism. If we're talking Create, then I am able to better follow that since it is a little more.....simple...ig? I still find it fun to watch your videos anyway Chosen, just to see what you come up with, and to explain/demonstrate the mods as you go :3 But back to Create for a sec. I think I'm able to understand that better due to the use of rotational energy instead of electrical/digital energy. And it's a lil more visual because I am able to see the rotations happen and determine how fast they should spin, as well as which direction they should rotate. Then there is the matters of the various Addons and things that come with it, including "Petrov's Parts" (if I remember the name correctly). That adds basically several different unique gears and diagonal/corner shafts called "Cardan Shafts". Sorry for the long paragraph ^^; I enjoy your videos Chosen, and will continue to watch them 👍⭐ Have a merry whenever y'all
this was very easy to understand how it works, even if i still dont understand how you get your AE systems to move things around to where you want it. ive even watched your AE2 tutorial lol.
Man, and I am struggeling in Stoneblock with AE2 in it's 1.12 stage atm... Look how far we've come with AE over the years. ;) played already with it a few weeks ago and it's phantastic. But the old one has it's charm, i have to admit :D Great vid as always 👍
Man, im just getting into AE as i used RS of atm9, but all this automation thing felt like a revolution with those new advanced things, no regret lol. This hundred atomic alloy was so good to look at, it wasnt filling the machine that way on atm9
You wouldn't even need 5 metallurgic infusers anymore with advenced AE if you can specify the input face of the extra item. One machine could do all without fancy EnderIO or LaserIO setups, especially with the factory and speed upgrades. That's neat and saves channels.
If someone wonder if you can automate alloys with normal pattern provider yes you can . You make a small subnet with 2 importers on infuser and white list the site of enriched extras. If you open ae2 guide it have an example show with a furnace and is basically the same thing .
Pretty sure that there is a mod in the pack that let you handle mechanism gases and chemicals directly with AE2, so you can even include the infusion chemical in your recipe as well.
Okay, but you don't even need AdvancedAE if you have Applied Mekanistics. If you have chemical storage, you can extract infuses that have been inserted into a metallurgic infuser by configuring the faces on the machine. It can't automatically eject so you'll have to do that yourself (such as with gas pipez or pressurized tubes), but you can effectively use an MI to "craft" the infuse chemicals by converting the items into the chemical itself. Then you don't even need an Advanced Pattern Provider to insert the infuse, since the MI has separate configurations for items and chemicals. It's a lot more simple than trying to configure which face each item would go into with the pattern encoder.
I agree, Applied Mekanistics is way simpler and more flexible than using the item form. You don't have to make any special patterns, you can just do everything straight from the terminal. And if you're putting multiple Infusers on a single provider you want the Blocking mode on, which means that if you make an 8:1 or similar pattern you'll end up with one slot in the machine unused. Gas form lets you do 9:9 fully saturating the machines.
I can automate Mekanism even from AE2's basic Pattern Provider, you don't need its Extended mod (from ATM9 to the sky). Besides, you can put the pattern provider in the crafting table so that it turns into a sheet and attaches it behind the machine. I believe that would be much more aesthetic than a block.
/oh yeah Advance pattern provders do look really cool. Great new feature, for sure seem built for mekanims. but also make me image Blood magic...i think
Since you specifically asked for feedback about the new stuff, I'd say that this is way overcomplicated compared to how easy it could be. Using just the regular AE2 stuff without the addons, I setup the same devices like you do and I have a crafting card inserted to the interface for each. The crafting card tells the system to keep it stocked with it's additive (refined redstone or whatever), and then just insert however many of whatever to get what i want out. No math needed that way. Your way makes sense if you're playing with limited resources, but you're not. You're basically on creative-level resources due to the OP generation you have setup.
@@boejeck1345 Ahhh gotcha. When I said limited resources, I was thinking early game in any pack, not just a skyblock. Like... if he hadn't gotten MystAg up and running so quickly and was having to mine for everything.
6:08 You can use an ME chest and put the applicator in the chest so that you’re working with its inventory directly and you don’t have to do any priorities. Also, they do in fact take dyes. You don’t need dyed matter balls.
I can't wait for you to get into Modern Industrialization, because it hurts my brain and I need your tutorial on it! It really hard to find any videos past the bronze age.
you should look into making the extendedae assembler matrix, it's a multiblock that replaces pattern providers and molecular assemblers and only takes one channel, i finished atm 10 with only 2 them they have ton of space.
The explanation, yeah. The setup could definitely simplify. He could setup the extra item on the infusers similarly to the osmium: crafting card that keeps exporting infused redstone or diamond or whatever. Then the patterns for your items just need base item into refined item. No need for math or side configuration for the pattern providers at all.
I would just rush and setup the quantum computer from advanced ae and the assembler matrix from extended as there relatively cheap and will replace all your craftings setuos for just 2 multiblocks!
I'll be honest, this is the third series where I'm watching this and it's still confusing, but my goal is to keep trying instead of copying and hoping it works lol
U honestly should start by copying several times first. It’s a great way to help u learn the way around these mods until u feel confident enough to try your own setups.
Do you know what this means!? You can now store potential outputs of Mob Predictions from Hostile Neural Networks and Auto-Fabricate On Demand without using Modular Routers!
20:58 You kinda lost me at loading the paint brush thing with a hard drive? What even was that? and why would they code it like that? Also: Refined Storage when? LOL
➡➡Chosen at 15:20 when you edited the Infused Alloy Prossesing Pattern in the Advanced Pattern Encoder i didn`t work because you closed the Advanced Pattern Encoder which when you opened it again was rest to the default configuration so the reason why it didn´t work was not because the other Setting was wrong (at least i think so)⬅⬅⬅
You can turn off channels with a simple command. Just type in /ae2 and choose the relevant auto filled options with tab. 20 second fix. Just need to redo the command every time you update your mod pack (since that overwrites the config file for ae2 that you changed with your in-game command).
@@destroyer99612 I think this pack already has a mod that adds RS type disks to AE2. Without the types, that is. You can also just make a lot of 1k and 4k disks if you store the bulk items in drawers. It's really not an issue without channels. You can have as many drive bays as you like, they're very cheap.
I’m Mekanism Architect, and this, is all the AE 10!
yes
Hey it’s in atm9
We are back!
And so it begins... hm? Now it's not merely just spins on, "You're ChosenArchitect and this is All The Mods 10."
@fuzziestsocks ;/
At 3:00, when you're talking about co-processors and molecular assemblers, that information is inaccurate. In order to fully utilize the speed of the extended molecular assemblers, you need about 32 co-processors per pattern provider/assembler ratio. So in your setup you have 3 or 4 molecular assemblers per pattern provider so you would need 96-128 co-processors in a crafting cpu. Co-processors don't relate to how many adjacent devices but rather the speed that the recipe batch is sent.
For mekanism automation, I specifically use a Chemical oxidizer, chemical storage disk, and only one infuser
Yeah. Applied Mekanistics is meant for this. Chosen should look up the mod.
I also just noticed he was cancelling out the default recipe for Applied Mekanistics. Since that one uses the gas form. He was replacing it with the actual enriched material.
Wait that's a thing? You can store the extra stuff from the infuser in gas form in me system? But how do you passively keep an amount of that chemical?
I came down to the comment section to say this :D
@@pac4sset up an infuser with a recipe like “enriched redstone -> 80 redstone infusion chemicals” and import bus the result IIRC. Then use recipes as normal with default AE2 pattern providers since items and infusion chemicals can both go through the same side.
Advanced AE is great don’t get me wrong, but in this case it solves a problem people only make for themselves by over complicating infusion / mekanism’s sidedness.
i can't believe AdvancedAE makes Mekanism Alloy Automation Fast & SIMPLE
i'm always so happy when i see your notification pop up, a 12h shift is going to end shortly and i have some good entertainment for dinner, thank you for keeping me entertained, i'm really hoping this season keeps going fo a while!
I'm Architect Mods, and this, is Gregtech Of The Skies!
Ty chosen for your hard word helping us to learn complex mod packs.
FINALLY, a more cleaner auto crafting for those side-specific machines
AE auto crafting tickles my brain. Gonna rush to my world and replace my mekanism setup with this one lol
21:00 i appreciate the explanation ❤
i've learned a ton of useful things from watching this series - thank you very much for the info and this playthrough
I really like modern packs like ATM10 but they are way too big to run for me. These videos are fun to watch.
This is my first modpack and you make things incredibly easy to understand while playing along
What I like to do with Mekanism is just have a passive production for everything, same for AE2 circuits, believe me it's 100% worth it to do that.
The AE episodes are always my favorite i love learning about this complex mod and cant wait to use it when i start ATM10
2:32 "and now for the fun part" 2:36 "now for the fun part"
I was 73% sure I was having deja vu moment XD
as an expert i understood everything and its goog 👍
Thankful for this episode, I was automating with a barrel and cables before this T^T
I found this helpful I've never touched on AE and always done refined as it's simpler in respects to channels, I now have advanced patterns setup and working thanks to this :)
U can always disable them with a simple command if u don’t feel like dealing with the extra challenge channels provide. I’ve used AE for years with channels, but some more recent playthroughs i’ve played without channels and it was pretty nice not having to worry about them.
You are Architect 10, and this is all the chosen mods.
Always love watching these, and I found the amount of tech very nice. Not too complicated but it’s always nice to watch how other people set their stuff up
Even knowing all this stuff, you kept a good pace and kept it entertaining, Loving the play through!
I love these little helpful tips you drop now and again. I didn't know you could specify block faces to use with the advanced pattern providers. I've been using the stocking feature in laserio to keep the enriched resources in stock in their respective infusers but this is very elegant.
Those arrows on the pattern providers! That's what has been wrong with my automation of them! (I know you pointed them out before, but I never correlated that to the purple ones and the issues I was having with them.
Thank you for your videos, fun, and informative.
To be quite honest: Besides some of the magic mods like Ars Nouveau or Irons Spells, I tend to lose track when it comes to stuff like AE or Mechanism. If we're talking Create, then I am able to better follow that since it is a little more.....simple...ig? I still find it fun to watch your videos anyway Chosen, just to see what you come up with, and to explain/demonstrate the mods as you go :3
But back to Create for a sec. I think I'm able to understand that better due to the use of rotational energy instead of electrical/digital energy. And it's a lil more visual because I am able to see the rotations happen and determine how fast they should spin, as well as which direction they should rotate. Then there is the matters of the various Addons and things that come with it, including "Petrov's Parts" (if I remember the name correctly). That adds basically several different unique gears and diagonal/corner shafts called "Cardan Shafts".
Sorry for the long paragraph ^^; I enjoy your videos Chosen, and will continue to watch them 👍⭐
Have a merry whenever y'all
You got me hooked on your channel now. I look forward to each episode every day, keep it up
I learned to setup an autocrafter with you ChosenArctech! That thig looked alien to me.
this was very easy to understand how it works, even if i still dont understand how you get your AE systems to move things around to where you want it. ive even watched your AE2 tutorial lol.
I understood it all and appreciate your hard work spreading the knowledge. But now it's time to appled flux, no more gates.
Man, and I am struggeling in Stoneblock with AE2 in it's 1.12 stage atm... Look how far we've come with AE over the years. ;) played already with it a few weeks ago and it's phantastic. But the old one has it's charm, i have to admit :D Great vid as always 👍
I really needed this episode, now i need to rebuild my setup😂😅
Man, im just getting into AE as i used RS of atm9, but all this automation thing felt like a revolution with those new advanced things, no regret lol. This hundred atomic alloy was so good to look at, it wasnt filling the machine that way on atm9
extended AE is probably the best addon ive ever seen, AE2 tends to be lacking sometimes and extended AE really helps out
You wouldn't even need 5 metallurgic infusers anymore with advenced AE if you can specify the input face of the extra item. One machine could do all without fancy EnderIO or LaserIO setups, especially with the factory and speed upgrades. That's neat and saves channels.
I was actually setting up my mek stuff today, this was really helpful cus I don’t know applied as well as refined, thanks
Logistics/routing is kinda fun, yes I am weird. Great video!
So many mods I'm still playing with ars will definitely be Re-watching these episodes
If someone wonder if you can automate alloys with normal pattern provider yes you can . You make a small subnet with 2 importers on infuser and white list the site of enriched extras. If you open ae2 guide it have an example show with a furnace and is basically the same thing .
Thanks for the episode,
I was doing the same thing today without the extended AE pattern providers and I almost rage quitted 😂.
I can’t wait to see you get into Quantum Crafting with AE2, MUCH much better than what you’ve currently got and should last until the very endgame!
This mod extension for mekanism is awesome, you can make automation more easy without many cable
Pretty sure that there is a mod in the pack that let you handle mechanism gases and chemicals directly with AE2, so you can even include the infusion chemical in your recipe as well.
Okay, but you don't even need AdvancedAE if you have Applied Mekanistics. If you have chemical storage, you can extract infuses that have been inserted into a metallurgic infuser by configuring the faces on the machine. It can't automatically eject so you'll have to do that yourself (such as with gas pipez or pressurized tubes), but you can effectively use an MI to "craft" the infuse chemicals by converting the items into the chemical itself.
Then you don't even need an Advanced Pattern Provider to insert the infuse, since the MI has separate configurations for items and chemicals. It's a lot more simple than trying to configure which face each item would go into with the pattern encoder.
I agree, Applied Mekanistics is way simpler and more flexible than using the item form. You don't have to make any special patterns, you can just do everything straight from the terminal. And if you're putting multiple Infusers on a single provider you want the Blocking mode on, which means that if you make an 8:1 or similar pattern you'll end up with one slot in the machine unused. Gas form lets you do 9:9 fully saturating the machines.
I can automate Mekanism even from AE2's basic Pattern Provider, you don't need its Extended mod (from ATM9 to the sky). Besides, you can put the pattern provider in the crafting table so that it turns into a sheet and attaches it behind the machine. I believe that would be much more aesthetic than a block.
/oh yeah Advance pattern provders do look really cool. Great new feature, for sure seem built for mekanims. but also make me image Blood magic...i think
Since you specifically asked for feedback about the new stuff, I'd say that this is way overcomplicated compared to how easy it could be. Using just the regular AE2 stuff without the addons, I setup the same devices like you do and I have a crafting card inserted to the interface for each. The crafting card tells the system to keep it stocked with it's additive (refined redstone or whatever), and then just insert however many of whatever to get what i want out. No math needed that way.
Your way makes sense if you're playing with limited resources, but you're not. You're basically on creative-level resources due to the OP generation you have setup.
I think its just habit at that point bc hes a big fan of skyblock
@@boejeck1345 I think you replied to the wrong comment....
@JaRyCu you said "your way makes sense if you have limited resources" thats what i meant by skyblock
@@boejeck1345 Ahhh gotcha. When I said limited resources, I was thinking early game in any pack, not just a skyblock. Like... if he hadn't gotten MystAg up and running so quickly and was having to mine for everything.
This is a stated opinion though. You’re likely just used to the way u do it. IMO this is not only easier, but way cleaner as well.
6:08 You can use an ME chest and put the applicator in the chest so that you’re working with its inventory directly and you don’t have to do any priorities. Also, they do in fact take dyes. You don’t need dyed matter balls.
the matter balls are way easier though since its a 1->8 ratio instead of 1->1
I can't wait for you to get into Modern Industrialization, because it hurts my brain and I need your tutorial on it! It really hard to find any videos past the bronze age.
you explain things perfectly, don't worry ^^
Hey Chosen I would love a Factorio PT from you! HNY
if you read this chosen, you should also get the space age DLC if you decide to play factorio
I learned today that my mekanism automation is VERY convoluted
What if you tried to use Skybloom blocks from Ars and use it in some of the interiors of the castle? I think that would be awesome
I'd definitely like to see some Chosen does ComputerCraft. :D
you should look into making the extendedae assembler matrix, it's a multiblock that replaces pattern providers and molecular assemblers and only takes one channel, i finished atm 10 with only 2 them they have ton of space.
Hey I just set up the quantum computer from advanced AE in ATM9
another great episode! i wish it's longer tho
The only cleaner setup would be to power the machines through the pattern provider itself with the FE mod ;)
17:54 the problem is that you exited the menu and it didnt save, not that you selected the wrong side
I'm so used to changes being auto saved even on existing thanks to mek 😂
Oh finally, the Architecten Chose by All The 10s Mod
you made it as simple as it can get actually
The explanation, yeah. The setup could definitely simplify. He could setup the extra item on the infusers similarly to the osmium: crafting card that keeps exporting infused redstone or diamond or whatever. Then the patterns for your items just need base item into refined item. No need for math or side configuration for the pattern providers at all.
Could you use one pattern provider for all these machines? Just have them connected via a cable or an interface?
I figure out one more auto raft for AE which is the matrix assembler which is a multiblock
I didn’t understand a single thing but I’m just here for the video
I would just rush and setup the quantum computer from advanced ae and the assembler matrix from extended as there relatively cheap and will replace all your craftings setuos for just 2 multiblocks!
Really, for the color applicator, the best way would be to just use an ME Chest.
Chosen I've heard that apotheosis got a progression update. Can you showcase it pls
I'll be honest, this is the third series where I'm watching this and it's still confusing, but my goal is to keep trying instead of copying and hoping it works lol
U honestly should start by copying several times first. It’s a great way to help u learn the way around these mods until u feel confident enough to try your own setups.
go for the assembler matrix chosen it is really cheap
Do you know what this means!?
You can now store potential outputs of Mob Predictions from Hostile Neural Networks and Auto-Fabricate On Demand without using Modular Routers!
Hi, i have a problem with ae2. Subnets dont see to storage. I have 3x3 cube controler and i have no idea how to fix this issue
where are gou getting this heads/helmets?
Yay I'm 5th (listened to APT while waiting)
Talking about computers though, not using cc tweaked to automate putting the potion filter into the pylon?
Doesn't it take the same time when making alloys to use blocks instead of ingots?
I think spokesperson chosen needs a raise… cut off so quickly to gameplay chosen, feels like he’s not that appreciated 😂
can you be side specific with SFM?
im thinking i should learn AE because i love mekanism and automating alloys is pain
20:58 You kinda lost me at loading the paint brush thing with a hard drive? What even was that? and why would they code it like that? Also: Refined Storage when? LOL
Still waiting for refine storage hello Darkness my old friend how i miss De to the end
atm 10 going to be like 200 episodes...
How can I play this on win 7, I cannot afford a windows 10 pc.
➡➡Chosen at 15:20 when you edited the Infused Alloy Prossesing Pattern in the Advanced Pattern Encoder i didn`t work because you closed the Advanced Pattern Encoder which when you opened it again was rest to the default configuration so the reason why it didn´t work was not because the other Setting was wrong (at least i think so)⬅⬅⬅
i tried to automate makanism but i coldn`t get the extra in and i destroyed every thing from anger
I refuse atm 10, i play 9 with friends and will continue until rs2.
Ae2 is not hard but i hate channel limits
You can turn off channels with a simple command. Just type in /ae2 and choose the relevant auto filled options with tab. 20 second fix.
Just need to redo the command every time you update your mod pack (since that overwrites the config file for ae2 that you changed with your in-game command).
@paulelderson934 can i remove disk type caps or no? I dont rly know the cmds lol
@@destroyer99612 I think this pack already has a mod that adds RS type disks to AE2. Without the types, that is. You can also just make a lot of 1k and 4k disks if you store the bulk items in drawers. It's really not an issue without channels. You can have as many drive bays as you like, they're very cheap.
🎉🎉
cant wait till they ad RS2 i cant take AE anymoreee ( i skipped through this ep)
I can't believe i saw this and now whoever reads this comment will see it too the arrow looks like a face -_-
Here first
First