Super helpful video. I’ve just 1 question; I’ve drawn a logo and wanna cut out the big letters at a depth of 4mm. Just beneath the big letters is a company name written in really small letters and I want to cut that out with my 60 degrees V bit at a depth of 1mm. The problem is, once is add the 60 degrees bit, he’s going to finish everything with te v bit, also the rectangle and the big letters. The question is; how can I ‘freeze’ cut settings ?
Great question! The easiest way to do this is to use multiple workpieces (they are at the bottom). Have all your bit/cut settings what you want for the specific artwork, just have the one you want on the specific work piece.
Couple questions, I dont see the "Cut Style" setting on my Easel project. Also I'm not following the process of roughing and detailing. Do I assign the item to be carved as detail or roughing? I don't get how it knows what should be roughed and what should be detailed.
The roughing/detailing is just in the bit selection at the top. There currently isn't a way to assign a specific section for either, it just creates it automatically!
Yep, since the length of each bit and how far it is inserted into the collet may change, you will always need to re-zero the Z axis. If you homed your machine from the beginning you could still use the same x and y-axis zero settings.
I use Patriot Nation Designs and I was wondering if you can combine something like a flag then add another design to it such as a flag then add on a firefighter etc. Thanks
Great question! You can't currently combine then both inside of one workpiece, but you could set them up on separate pieces and carve them individually.
Yep! You would just need to be careful to not cut deep enough that you would run into the previous carve. Also it helps if you have a way to index the material to the work board so it stays in the same spot when it’s flipped
why does noone show how import STL images from the internet, You people only show how import it when you already have it downloaded and ready to import straight from your computer to EASEL
![[TH] 2024 PMSL SEA GF D2 | Summer | ร่วมส่งแรงใจ เชียร์ไทยไปพร้อมกัน](http://i.ytimg.com/vi/dN2gLsCJ0T0/mqdefault.jpg)
Where are you downloading the models from?
thanks! this is super helpful
Great, glad it helped!
Hello. Which post processor is suitable for ArtCam?
Great Explaination! Thanks
Glad it was helpful!
How would do a cut-out /clear-out (i dont know the actually term for it) of a 3d object?
Great feature inventabels
Thank you very much i believe it will save me some time...
Glad it helped!
Super helpful video.
I’ve just 1 question; I’ve drawn a logo and wanna cut out the big letters at a depth of 4mm. Just beneath the big letters is a company name written in really small letters and I want to cut that out with my 60 degrees V bit at a depth of 1mm. The problem is, once is add the 60 degrees bit, he’s going to finish everything with te v bit, also the rectangle and the big letters. The question is; how can I ‘freeze’ cut settings ?
Great question! The easiest way to do this is to use multiple workpieces (they are at the bottom). Have all your bit/cut settings what you want for the specific artwork, just have the one you want on the specific work piece.
Couple questions, I dont see the "Cut Style" setting on my Easel project. Also I'm not following the process of roughing and detailing. Do I assign the item to be carved as detail or roughing? I don't get how it knows what should be roughed and what should be detailed.
The roughing/detailing is just in the bit selection at the top. There currently isn't a way to assign a specific section for either, it just creates it automatically!
Thank you for the video! Can I have an X-Carve Pro 4x4 to experiment with?
😀
When can we choose a different finishing bit???
Can you share the United States STL model?
Do you still have to zero out the zed axis after tool change?
Yep, since the length of each bit and how far it is inserted into the collet may change, you will always need to re-zero the Z axis. If you homed your machine from the beginning you could still use the same x and y-axis zero settings.
Hablas muy rápido!!! Saludos desde Catapilco Chile.
I use Patriot Nation Designs and I was wondering if you can combine something like a flag then add another design to it such as a flag then add on a firefighter etc. Thanks
Great question! You can't currently combine then both inside of one workpiece, but you could set them up on separate pieces and carve them individually.
Would that work with 3d flag also? If so could you possibly make a video showing how to?
It would! More 3D carving videos are planned for the future.
can you flip it over and carve a name on the back by hitting bottom?
Yep! You would just need to be careful to not cut deep enough that you would run into the previous carve. Also it helps if you have a way to index the material to the work board so it stays in the same spot when it’s flipped
Does this require pro?
3D carving does require Easel Pro.
why does noone show how import STL images from the internet, You people only show how import it when you already have it downloaded and ready to import straight from your computer to EASEL
Here are some great places to find free STL's online: blog.inventables.com/blog/8-best-sites-to-download-stl-files-for-3d-carving
Easel does 3D carving better than Vcarve....just say'n
Glad your liking it!