I have had my Vamoose pop top now for 15 months and couldn't be happier. It is not the flashiest with no panoramic zips or multi windows and one colour fabric choice. What it is though is belts 'n' braces and bombproof ! They have been making them for years, it is tried and trusted. It laughs at bad weather and rain! I love the neatness of the internal gas struts and the simple st-steel hinges to the rear ( no stupid bungee needed here to stop catching in the scissor hinges ). I have extended the bed board and now have 2.1 metres bed length in a swb T5.1. They had my van for 2 days and fitted the colour matched pop top, deluxe bed board, diesel heater, Vamoose awning rail and new rear window. I also bought their bespoke internal thermal liner for winter use. And my van had furniture and a RIB bed already installed. Others didn't want to know. Vamoose just got on with it. Decent price too. Highly recommended!
Hi Lucas Just like to clarify something with you , this video was taken by one of our customers around 7 years ago , it has obviously been edited as the part where we TRIPLE seal all the frames and paintwork is not shown , I have been building camper vans for almost 30 years and fitting our Vamoose roofs for nearly 12 years , we have installed 1000’s of these and guess what , no rust ! I’d suggest you get your facts in order before you comment on things you have never seen and no nothing about .
u shows everything but not the paint? this is not Lucas fault. this is big mistake to not showing it in this video, cuz u are amazing to do hard works like this. Well made 😁
These guys are so efficient and experienced; making it seem so simple. Would definitely consider them for any project relating to van space utilisation and customisations. I am very curious about a rough estimate on how much does this process cost ?
Absolutely perfect. I can now make one myself and fit it to my van. Just have to make an aluminium frame with corner reinforcements and strengenthing bars at front and rear for it. Thats just saved me a pretty penny.
In 4 minute 36 seconds The VamOOSE let LOOSE their trade secrets ;but they GAIN APPLAUDS from those who can afford only DIY in all other parts of world ! Great DECODED VIDEO on making pop top!
No the van is as strong with our frame in as it was with the original roof , it has been structurally tested by the RDW in the Netherlands and fully certified for type approval. ( no such test is available in the U.K. hence it was tested in Europe )
@@vamoosecamperconversionltd5598 is it possible to have one that opens the other way? Opening perpendicular to the length of the van rather than parallel?
Hi, if van was originally lwb panel van, is it legal to cut the roof and install a pop top? Does it have to be checked by an engineer and inform dvla ? I’d love to do this but really don’t want to cut the roof just to have issues with police etc since all these stupid regulations have come in
I dont mean to be offtopic but does someone know a tool to log back into an Instagram account..? I stupidly lost my login password. I love any tricks you can offer me!
@Grayson Stetson I really appreciate your reply. I got to the site on google and Im in the hacking process atm. Seems to take quite some time so I will get back to you later with my results.
Is the overall structure weakened by removing the roof cross beams. It's Difficult to imagine the aluminium frame providing any roll over strength compared to the original ?
@@kristianszabo3817 held to sheet metal with rivnuts? are you kidding me? the frame might be strong but it'll get sheared right off if there's an accident and the vehicle ends up on its sides.
Hi I’m thinking of getting this done to my lwbT5, there are so many manufacturers of the pop tops, out there, what is the name of this one just reviewing all of them before I go ahead Many that
I'm looking to do exactly this to another van, and I have a question. After cutting out the roof, sheet and frame, what was that white frame made from that you set on top?
Did not show in detail the most important: sealing between roof and frame ! The roof is not flat, the frame seems flat. Looked like they put silicone in the gaps, but just in there. Seeing only this, I bet it will leak :-(
There is a purpose made channel in the strengthening frame which is filled with bonding sealant. When the frame is fitted it seals the bare metal edges. After this the frame is sealed from the inside and then again from the outside. No chance whatsoever of any rust anywhere.
I noticed it's a ridged roof. How do you fill in the valleys to prevent water leakage? I saw you squeeze some kind of material in there, what was that? And was any other step to the process of making the valley's water tight?
Dan Staszko 💪💪 If a high strength LEXAN, Kevlar, & Carbon Fibers were properly constructed, that portion of the vehicle should be much Much lighter weight & stronger then the original sheet metal. Similar to an air craft canopy. Strong & visible
That's the first thing I noticed, if they are not bothered about protecting the outer & internals of the van before cutting , makes you wonder if other corners are being cut when fitting. It doesn't take long to sheet up the outer bodywork and inners of the van to protect it from metal swarf\filings, a little extra care speaks volumes when a customer is looking for a converter to cut a big hole in their pride and joy. Come on Vamoose surely you are better than this?
Great video. These guys know what there doing! Let us know please where we can pick up a unit in the U.S. I bet there would be keen interest in installing your units on our vans here you know.
Aluminium frame in replace of steel cross members . I would not trust it in aside crash.. crash tested?? I think it's reimo that put in a STEEL sub frame when the original tin roof and cross members are removed.
+andrew moon The profiled frame has a groove in the underside which is filled with sealant before it is dropped in. This coats any bare metal. The frame is then double sealed from the inside. Then triple sealed from the outside. Absolutely no way any metal will ever rust. Sometimes best not to talk about things you know nothing about.
I am seriously impressed with this pop top and the obvious expertise the fitters have. What a product!
I have had my Vamoose pop top now for 15 months and couldn't be happier. It is not the flashiest with no panoramic zips or multi windows and one colour fabric choice. What it is though is belts 'n' braces and bombproof ! They have been making them for years, it is tried and trusted. It laughs at bad weather and rain!
I love the neatness of the internal gas struts and the simple st-steel hinges to the rear ( no stupid bungee needed here to stop catching in the scissor hinges ). I have extended the bed board and now have 2.1 metres bed length in a swb T5.1.
They had my van for 2 days and fitted the colour matched pop top, deluxe bed board, diesel heater, Vamoose awning rail and new rear window. I also bought their bespoke internal thermal liner for winter use. And my van had furniture and a RIB bed already installed. Others didn't want to know. Vamoose just got on with it. Decent price too. Highly recommended!
Had this exact same idea for my VW Vanagon. Hope my DIY fits like a glove like yours.
Hi Lucas
Just like to clarify something with you , this video was taken by one of our customers around 7 years ago , it has obviously been edited as the part where we TRIPLE seal all the frames and paintwork is not shown , I have been building camper vans for almost 30 years and fitting our Vamoose roofs for nearly 12 years , we have installed 1000’s of these and guess what , no rust !
I’d suggest you get your facts in order before you comment on things you have never seen and no nothing about .
u shows everything but not the paint? this is not Lucas fault. this is big mistake to not showing it in this video, cuz u are amazing to do hard works like this. Well made 😁
These guys are so efficient and experienced; making it seem so simple.
Would definitely consider them for any project relating to van space utilisation and customisations.
I am very curious about a rough estimate on how much does this process cost ?
Do you guys not protect the bare metal edges, and holes that were drilled?
look like easy, but its so difficult to do ! great ! good and incredible job!
So what replaces the bracing from the roof for strength ie for stiffness of vehicle and if the vehicle turned over in an accident?
Nothing, and then ya die
That was cool 😎. Always wondered how the process went
Absolutely perfect. I can now make one myself and fit it to my van.
Just have to make an aluminium frame with corner reinforcements and strengenthing bars at front and rear for it.
Thats just saved me a pretty penny.
I’m impressed! What is the extrusion you are using for the base which bolts to the roof of the van please?
In 4 minute 36 seconds The VamOOSE let LOOSE their trade secrets ;but they GAIN APPLAUDS from those who can afford only DIY in all other parts of world ! Great DECODED VIDEO on making pop top!
Is the structure very weakened after the process? i mean, for the road. Great job! Regards
No the van is as strong with our frame in as it was with the original roof , it has been structurally tested by the RDW in the Netherlands and fully certified for type approval.
( no such test is available in the U.K. hence it was tested in Europe )
@@vamoosecamperconversionltd5598 is it possible to have one that opens the other way? Opening perpendicular to the length of the van rather than parallel?
This is possible in renault kangoo or citroen berlingo?.
I would love to install on my fj60 here in the US!
looks great, but IMO, y'all should still use the section of the roof you cut off to convert into a removable roof bed.
Pretty sure they installed the roof bed!
What prices do you charge for the install? We have a solid T4 which could benefit from more height.
Hi, if van was originally lwb panel van, is it legal to cut the roof and install a pop top? Does it have to be checked by an engineer and inform dvla ?
I’d love to do this but really don’t want to cut the roof just to have issues with police etc since all these stupid regulations have come in
สุดยอดที่จะเอาเป็นแนวทาง ทำหลังคา
very nice video fellas, you made it look so easy
*Videonun Perde Arkasi* youtubem.video/r/?aEnTDSHys5vAzkMw10nRw9VyP=Ys7VS7Bh2r
amazing!! great work!
What tool did you use to make the initial cuts in the roof? Thank you.... this is freaking awesome!
Step bit then pneumatic metal shears
werden die schnittkanten nicht gegen rost versiegelt? es wurde ledig kleber aufgetragen
I GOTTA HAVE ONE. How much and where is this???
i wish you were in mexico, so you make my van elevating roof, here in mexico there is nobody that makes those jobs
Thats the way it should be a reinforcement frame when the roof braces are cut
I'd love one for the ford transit. But I'd like it to pop up the opposite way
Do you ship the roof kit to the USA?
Genial saludos cordiales desde Patagonia Chile
Is there anyone in the States that can do this. Thanks in advance. RH
Roof and body supports removed. Paint work not masked off. Metal not treated. Looks like it's done at my place with splash and dash fast fitter boys.
That was a nice installation, good job.
I dont mean to be offtopic but does someone know a tool to log back into an Instagram account..?
I stupidly lost my login password. I love any tricks you can offer me!
@Nico Tristan instablaster ;)
@Grayson Stetson I really appreciate your reply. I got to the site on google and Im in the hacking process atm.
Seems to take quite some time so I will get back to you later with my results.
@Grayson Stetson It worked and I actually got access to my account again. Im so happy!
Thank you so much you saved my ass :D
@Nico Tristan no problem :D
Is the overall structure weakened by removing the roof cross beams. It's Difficult to imagine the aluminium frame providing any roll over strength compared to the original ?
obese1konobe That's what I was thinking about too. I assume however, they have done some tests and have qc of that.
@@kristianszabo3817 held to sheet metal with rivnuts? are you kidding me? the frame might be strong but it'll get sheared right off if there's an accident and the vehicle ends up on its sides.
Hi I’m thinking of getting this done to my lwbT5, there are so many manufacturers of the pop tops, out there, what is the name of this one just reviewing all of them before I go ahead
Many that
Hi the roof you cut as same roof you used back to put on I want to know can you use same or buy another one
Nicely done.
Now I 'm Liking and Subscribing and Belling.
So sad to see that website in the end that they are located in the UK :(
Just wondering what tool you used to remove that roof because I have to do that on a vintage camper I have.
This is fast as hell, so why I gotta wait a year for mine??
What??!!
Good job.. how much for nissan nv200 pop top roof
I'm looking to do exactly this to another van, and I have a question. After cutting out the roof, sheet and frame, what was that white frame made from that you set on top?
*Videonun Perde Arkasi* youtubem.video/r/?aEnTDSHys5vAzkMw10nRw9VyP=Ys7VS7Bh2r
it was made from cheese
I like it but I would want it to go all the way up and I don't want the netting or anything just it to open all the way
Did not show in detail the most important: sealing between roof and frame ! The roof is not flat, the frame seems flat. Looked like they put silicone in the gaps, but just in there. Seeing only this, I bet it will leak :-(
I'd use Windshield adhesive or possibly a form fitting silicone seal w double sided 3m tape
yeah.. im pretty sure they know what they are doing you Bellend.
@@RobBob555 pot calls kettle , rtc. it'll leak
@@kcajmortsnnew1488 If you look later in the film they seal around the frame
Didn't seal the edges of the cuts with paint! Rusty rusts!
There is a purpose made channel in the strengthening frame which is filled with bonding sealant. When the frame is fitted it seals the bare metal edges. After this the frame is sealed from the inside and then again from the outside. No chance whatsoever of any rust anywhere.
@@ed29011 steel rusts even in air... this is why you paint even in dry conditions.
I have a Rav4 Hybrid. Is it possible to raise the roof on it?
I noticed it's a ridged roof. How do you fill in the valleys to prevent water leakage? I saw you squeeze some kind of material in there, what was that? And was any other step to the process of making the valley's water tight?
Is it possible to do this on a T2 bay window from 1973 ?
how is the roof re enforced sence you took some of the supporters out?
Dan Staszko 💪💪
If a high strength LEXAN, Kevlar, & Carbon Fibers were properly constructed, that portion of the vehicle should be much Much lighter weight & stronger then the original sheet metal. Similar to an air craft canopy. Strong & visible
What is that you use to cut the roof first ?
But what about a design for a hardtop version? 🤔
The music is deafening
Wow that was amazing, great work
What kind glue did you using ?
Would it be possible to install a roof like this onto a larger van like a VW Crafter, so that only a part of the roof lifts?
There is... just not on Vamooses list. I need one on a Sprinter.
I need to raise my Suburban GMC roof
Can it done
You can never have too much decent sealer
Can you do that to a 2008 toyota sienna minivan?
I need this done to my suburban.
What kind or brand of sealant did you use to glue that pop top frame to the steel roof?
they used old discarded chewing gum they picked up off the street.
How much does this cost?
You didn't even attempt at masking or protecting any other part of the bodywork before you started cutting.
That's the first thing I noticed, if they are not bothered about protecting the outer & internals of the van before cutting , makes you wonder if other corners are being cut when fitting. It doesn't take long to sheet up the outer bodywork and inners of the van to protect it from metal swarf\filings, a little extra care speaks volumes when a customer is looking for a converter to cut a big hole in their pride and joy. Come on Vamoose surely you are better than this?
Covering the panel for a simple cut is for people who intend on making a mistake.
*Videonun Perde Arkasi* youtubem.video/r/?aEnTDSHys5vAzkMw10nRw9VyP=Ys7VS7Bh2r
The trim ring covers any imperfections, and they did cover the seats ,so they are mindful of what they are doing , professionals, all the way ..
On minute 1:59, what is the name for this part?
SUPER!
*Videonun Perde Arkasi* youtubem.video/r/?aEnTDSHys5vAzkMw10nRw9VyP=Ys7VS7Bh2r
you guys should slow down a bit - you are going to have a heart attack! seriously though, excellent video and well made.
*Videonun Perde Arkasi* youtubem.video/r/?aEnTDSHys5vAzkMw10nRw9VyP=Ys7VS7Bh2r
NoChallenge it's in fast forward lol
Great video. These guys know what there doing!
Let us know please where we can pick up a unit in the U.S.
I bet there would be keen interest in installing your units on our vans here you know.
Can this conversion be used on any full size van?
Probably.. I've an LDV that I'd like this on..
Great Video but do something with the music!
It's great music
👍👍👍
Brasil 🤩
I am not impressed because I thought this would be a full roof pop-up rather than a half roof hinge job
music is not necessary
Aluminium frame in replace of steel cross members . I would not trust it in aside crash.. crash tested??
I think it's reimo that put in a STEEL sub frame when the original tin roof and cross members are removed.
Gavin Fisher 000
Ok.
Vans are not safe or built with any strength to begin with.
มืออาชืพสุดๆ บ้านเราพี่ไทย ทำได้เหมือนกัน แต่สภาพรถภายในนี้ เลอะกระจาย
красиво конечно, ну а рамку крыши ,усиливать не надо что ли？
very cool
*Videonun Perde Arkasi* youtubem.video/r/?aEnTDSHys5vAzkMw10nRw9VyP=Ys7VS7Bh2r
Can i install at my van ? Nissan vannette
no, your van is too shit.
😮
Name of the kit
yep music was horrible,but the job is okay
I need someone to help me do this
I been looking for a place here in the US so I can convert my 2008 scion xb . anyone?
OMG SAME. I don't have a van yet, but I wanted something like this, or something. Is there a company or branch in America that does this same thing?
Dude yes. My mom has this old mini van I'm gonna put a pop top on
Sportsmobile based in california and texas.
@@milk2percent416 of course you are ..looooooooooool
Awesome
In a few years - rust, rust, rust - with your installation
Turbo will fail before rust
Kill the noise (music)
oh come on there is far more annoying music you could have used for a video
not gona show the finished product wtf
It's almost like a pick up truck tonneau cover backwards
music is so noisy...
Medi Alexander turn your volume down you idiot
l ml ml
Dumb music
you made a big mistake that will in years to come cost your customer dearly
What was it?
+Zac Wingfield its a vw van lol
+andrew moon Hundreds of roofs over many years and no rust yet pal.
+andrew moon The profiled frame has a groove in the underside which is filled with sealant before it is dropped in. This coats any bare metal. The frame is then double sealed from the inside. Then triple sealed from the outside. Absolutely no way any metal will ever rust. Sometimes best not to talk about things you know nothing about.
I think they know what they are doing, rather that some 13 year old kid who can't even drive yet.