How To Replace Dashboard Light Bulbs On Toyota Corolla 1990 - 2002 Use 194LL Bulbs
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- 194LL Bulbs Were Used To Replace Burnt Out Ones.
Replacing the burnt out dashboard light bulbs on a Toyota Corolla is something you can do yourself in a fairly short amount of time. This can save you a costly repair bill and won't cost you more than the price of a few bulbs. This video walks you through all that is necessary to get the job done quickly and easily! The procedure outlined here is applicable to model years 1990-2002, with very little difference in the required steps.
#toyotacorolla #autorepair
Click on these Affiliate Links below to shop for these replacement dashboard bulbs on eBay or Amazon.
eBay: rover.ebay.com/...
Amazon: amzn.to/2ziBHn1
Stan, I have seen THOUSANDS of these types of videos, but the way you did it is GREAT. Sometimes the recorder will assume that the person watching understands everything, but you have done a FINE job of explaining what needed explaining, and NOT explaining the trivialities of the job. You explain things the way I do. I appreciate that. Thanks.
And Thank You, John! I appreciate the feedback. I know I need things explained a certain way to me to get the point across, and I hope I'm doing the same. Thanks for watching!
@@HowSkills great video, I appreciate it! I did just like you said on my 2001 Camry Solara, but when all done it didn't work. The only thing I didn't do that you did was detach the cables first, could that have caused the dashboard to no longer light up? Btw, the other lights work PRDNL, ABS, check engine etc. I appreciate any feedback you can give.
Tina
My wife has been dealing with this issue for FAR too long, and this video was so clear and easy to follow. thanks so much for making it.
You're welcome, and I hope it helped fix the problem for your wife.
Great video! I have a 1999 corolla and I just changed my lights the exact same way and it was successful! Thanks very much! Awesome work!
Really glad to hear that! Feels good to save money by doing it yourself, doesn’t it!
Yea it really does! Thanks again!
Thanks for commenting this, my dashboard lights went out and I have a 99 corrolla too
@@HowSkills Thanks for the video! I have to change bulbs in my '99 corolla very soon, so Your video will be extremely helpful
Worked on my 2002 Toyota Corolla! Saved me at least $100. Thanks!
That's awesome, Bardia! Glad to hear it - I know it saved me a lot of money by doing it myself, too. Thanks for watching!
for anyone wondering that is a type 194 T10 bulb. the smaller lights are 74 bulbs. I left the bulb condoms off when i did this, it lights up more white instead of green however it makes it a bit more bright.
Thanks for that, Walter!
Thank you that’s exactly the information I was looking for. I’m trying to replace all the lights in my wife’s car
I'm pretty critical of many youtube videos as they are often absolutely terrible, incorrect info, first timers who don't know squat trying to teach others, horrible photography, the list goes on and on but you seem to have nailed it. I can't find one word of criticism and anyone who has any mechanical aptitude whatsoever should be able to do this. It was truly a pleasure to watch and very easy to understand. You should give lessons to most others on youtube!!!! I'm doing my corolla tomorrow. Thank you.
I appreciate your saying that, and I’m glad to be able to help. The main thing is that you’re willing to tackle this yourself and you’re going to save some money. Can’t beat that. Thanks again for the kind words and thanks for watching!
This video is GREAT!!
I've had a few lights out on mine since i bought it from auction and was afraid to deal w it.💯
I'm attacking this on Saturday now!
Thanks to you.
You're THE MAN.
You’re welcome! It worked great for me, and it’s fun not having to pay someone else a lot to do it. Best of luck with it on Saturday.
THANK YOU NO EXTRA TALKING GOT RIGHT TO THE POINT
Thanks for watching!
Great video pal! I couldn't have asked for more concise & detailed step by step directions! The economically challenged thank you!
+John Kevin Landry You're welcome - I'm glad it helped. And thank you for watching!
Thanks, I’m 15 and I’m working with my grandpa. He has a customer who has the entire right side of the dashboard lights burnt, so I gotta replace them. Cant wait to get started!
Sounds like a great project for you, and one that will make the customer very happy! Thanks for watching.
@@HowSkills alrighty, the customer delayed the job til after thanksgiving, so I had to wait. Gave me more than enough times to comprehend the video well. I did it! Thank you so much😃 My grandpa is asking how much I should charge for labor. It wasn’t challenging or hard, thanks to the amazing video. The bulbs were 99 cents and I spent 20 minutes on the job. Do you have an estimate of how much I should charge for labor? Thanks!
Going to be trying this soon. All hopes it goes well. Looks much easier than I thought.
Excellent guide, very concise.
Thank you very much for watching!
Great video starting my memorial day weekend with this task
Hope it all goes smoothly - Happy Memorial Day!
Perfect video, my mom will be happy with her car again ! Thank you !
Awesome 👍 no more check engine light thank you!
Nice! Glad you got that done!
Followed this video to the tee -- everything works great! Thank you!!!
Awesome - glad to hear it! Thanks for watching!
Great how to, just did this to mine and worked perfectly!
Great to hear that!
Thanks for making this! Looks much easier than I feared.
Worst part is getting the instrument housing out from around the steering wheel.
Excellent video. Very well done. I'm not a car guy at all so this is going to help me very much as I make this fix on my car. I only watched it once, and don't even feel the need to watch it again because the process was explained well. thanks!!!
Thank you - I'm glad it helped. And thanks for watching!
Thanks for the video bud. Complete and concise.
No problem - and thanks for watching! Hope it helped.
Wow... 100% helpful
My check engine bulb went out and I can't pass smog unless I fixed it
No need to put lots of money into an 02 Corolla
I did what you said, it worked
The magnetized screwdriver tip was invaluable
Really glad it helped. Always saves lots of money when you can do it yourself!
@@HowSkills yep... you made it easy... keep it up, you're helping people
Great video for myself to do this job on my 1990 Corolla...thx Stan!
You’re welcome! Glad it helped.
My 01 Just went out! Easy to understand vid ! Thx Stan.
Glad it helped!
Thank you so mutch, just bought my 2001 corolla g6 and half the tachometer doesnt glow up so imma try this, thank you!!
You’re welcome! The LED lights make it look really good.
GREAT JOB , NOW I CAN DO MINE , 01 TOYOTA COROLLA LE , MY INTERIOR IS IDENTICAL, THANKS FOR SHARING THE INFO !!!
Glad it helped, and I hope it all went well for you!
Wow, thank you for this tutorial. You did an amazing job on directions and what not. Needed this exactly how you described. A+
Thank you for watching - I’m glad it helped!
Nice, thanks for the video :)
This is one of the best repair videos I've seen. Thanks for posting!
BTW, I checked the laws here in Michigan and didn't see anything saying it's illegal to drive at night without instrument panel lights. (Not that I would want to.) :-)
Thanks for watching! And from what I've looked at since this video, I don't think it's actually illegal in very many, if any, states. Just read some cautions about safety, and what law enforcement might think if they pulled you over for something, and they walked up to a car with a totally dark interior. I know it felt weird at night to not know my actual speed, or if I was getting too low on gas, so I had to get it taken care of as soon as possible. Hope the video helped!
Great video I'm glad I can save a bit of money and do this myself now
I’m glad it helped!
So helpful! Thank you!!
Appreciate your video, explanations and time... Blessings!!!!
Thanks for watching!
Awesome now ima try to change my left directional bulb
Many thanks for your video!! Wish you lived in my county in FL since I have had a check engine light P500 for 2 years now!!
Lol! Thanks for watching, and sorry I can’t help with that check engine light!
Watched Till I can teach it! Thank You! Now, I'm confident to do mine!
You can do it! And you can save a lot of money by doing it yourself...go for it!
@@HowSkills Being a Lone Wolf there is only me! Going on 65! Bought me, some cute black mechanics overalls. Waist with a cinched belt... I'ma Ready! Thank You!
Nice tutorial..keep it up sir..new subscriber from Philippines.
Thanks for subscribing...I really appreciate it!
Thanks so much Stan, for the inspiration to get this job done by myself!
I have a 1998 Sienna that has at least two of its dash board lights out and with your video, I’m prepared to give it a try.
Take care and thanks for your good work!
Roy - Buffalo, NY
Roy Lewis If I can do it, you can too, Roy. I was a little leery of trying it, but I got over that when I thought about how much a garage would charge me - being a cheapskate got me inspired! Thanks for watching.
Very helpful and explained well. Also helpful would be to have known what type/size bulbs are used and where they're located.
Good point - I should have included that information. Thanks for watching and commenting!
I think thats a t10 bulb. The now come in an LED variation so you can have a brighter dash.
Thanks, Cyril. I would definitely get the LED bulbs to replace the old ones. I put affiliate links for eBay & Amazon to searches for these bulbs in the description of this video.
Thanks, Cyril. I would definitely get the LED bulbs to replace the old ones. I put affiliate links for eBay & Amazon to searches for these bulbs in the description of this video.
Thanks for the video, it was really well explained and the instructions were very helpful 😁
Great...glad to hear that! It’s a great way to save some money by doing it yourself.
beautiful i will get my corolla 2000 done right way lol...thx
Jordao Teixeira Yeah, it’s one of those fixes that at first you might think it could be a big hassle, but it’s really not too bad. You can do it!
Thanks for this video! This should help me a lot.👍🏼
Glad it helped. You can do it!
This video very clear thank you so much sir 🙏❤️
You’re welcome, and I’m glad it helped!
So nice. Great job 👍
Hope it helped, and thank you for watching!
Great video my brother , needed this 🙏🏾
Glad to help, and thanks for taking the time to leave a comment!
@@HowSkills gotchu my brother 🙏🏾
Great video..and a huge help..TY
Glad it was useful to you!
Very detailed instruction. Exactly what I needed. Thank you!
+Shadow Glad it helped. Thanks for watching!
Excellent video!!
I hope it helped - thank you for watching!
Your video is a big help! Liked and subscribed!
That’s great to hear - glad it was useful to you!
Thank you sir!
You're welcome, and I thank you very much for watching!
@@HowSkills Subbed.
Great with instructions. Thank you
Thanks for the info bro 😎
You’re welcome, and I hope it helped!
Nice, and same to you.
The Daytime Running lights cause these dash lights to go out prematurely. As soon as the car is started, the DRLs and the Dash Lights come on.
Good job u r doing there, tq for sharing
You're welcome, and I thank you for taking the time to watch!
Thank you so much
I hope it was helpful - thank you for watching!
I am from Egypt and your page is very good. Please answer my question thankyou put How to replace bulbs in dashboard Toyota Corolla 2006
Nice video! Thanks.
You’re welcome - I hope it helped!
Attempting to do this tomorrow since mine are also blown out in my 97 Corrolla. Two things: 1) What if your car doesn''t have a steering column adjustment option? Will it be a problem popping out the center console? 2) Do we need to disconnect the battery first? I've heard if you don't it could possibly set off the airbag while you're working on it.
You should still be able to maneuver the center console piece out - it's just easier with the column adjusted down and out of the way. To be on the safe side, I would go ahead and disconnect the battery. I honestly didn't, but now that you mention it, I think it's a good precaution!
You were right. Even with a steering wheel in the way I was able to get everything removed, replaced and re-assembled. It's just a really tight fit and you'll need several different sized screwdrivers...at least I did.
+SpideySensei72 Great! These kind of things aren't always the easiest, but it beats paying somebody else to do it.
Excellent. Thank you.
+Rayen Martinez I hope it helped - thank you for watching!
hey bro tq this video Malaysia awesome
You’re welcome - I hope it helped!
Your video is good and i was able to replace the lightbulbs on my own! BUT!! my lights on my dashboard are still out and I even check the fuses. I really don't know what is going on :c
thank you for sharing.
You’re welcome. And thank you very much for watching!
Thank you man.👍
You’re welcome - I hope it helped!
what is the size of the main light bulbs? the big one which is tinted?
THANKSSSSSS FOR THIS
You are very welcome...thanks for watching!
Good job. Thank for video :)
I appreciate that - and thank you for taking the time to watch it!
Thanks for the video. Got me thinking what's to stop someone from replacing cluster with a lower mileage car?
Hmmmm...good question!
Thank you for the information. Will be fixing mine tomorrow
I have the same vehicle and this was very helpful. My question is what are the size of those bulbs.
I used Sylvania 194LL (Long Life), 14v, 3.8w bulbs that I bought at AutoZone. Those were the bulbs that were recommended for my vehicle in their system. Hope this helps, and thank you for watching!
Sylvania 194 you can get at O'Reilly's same size bulb for license plate,
+Kevin McGrath O’Reilly’s is great. We have one in town and they’re very good to work with - they’ll do anything to help you out when you’re needing something for your vehicle. Thanks, Kevin!
Obrigado.
De nada!
Thanks, just disabled my abs light to pass inspection...
Glad you were able to pass!
great video, can change the light bulbs to led??
Yes you can! And they’ll last longer.
Can this OEM bulbs be replaced with LED's with any problem?? Great video...Thank You
Yes, the LED bulbs will work just fine as replacements, and are really the best way to go. Thanks for watching!
Thank You, Stan for information..WILL GIVE THAT A TRY....
Good deal - it can definitely save you some money by doing it yourself.
Can I do this with a 2006 Camry?
I'm sorry, but I honestly don't know for sure if the same exact procedure would apply. I'm sorry I can't help with this, but thank you for asking!
Good job, all were 194LL bulbs?
Yes, they were. If I were to do it again, I'd probably put LED's in though.
I have an Toyota Avensis 1997-2003 UK spec. the dashboard looks very similar. I guess as the Avensis replaced the Corolla most of the parts and descriptions are the same?
Should be very close. Maybe some small differences, but I would think basically the same overall. That has been the case with some other Corolla variants.
Thanks currently doing this on my 98 Corolla just don't know how to put the steering wheel a bit down ( I'm 15 first car)
I’m not sure that all models of the Corolla had an adjustable steering column, but if yours does, there should be a lever on one side of it that you can flip that allows it to be moved up and down. If you can’t move it, you can still get the job done, but it’s a little more awkward to get to some of the screws.
The lever is most likely on the under side of the steering column.
@@HowSkills yeah I got it done already thanks for the video it was practically the same just without moving the steering wheel I got ice blue lights instead
Great vid! Is the speedometer fuse also accessed from the same place?
Thanks for the video I have a 2000 Corolla CE that the turn indicator went out, so this'll be helpful. Also, off topic but what do ya mean ignore the ducks? Rubber ducks are awesome, lol
You are right...rubber ducks awesome and they deserve all the recognition they can get!
Okay so I just change the dashboard lights in my 99 Corolla went to Canadian tire here in Toronto Canada the guy at the counter looked up for me but they didn’t anything in there system for the dashboard light to I went to alie with bulbs I picked up the sylvania 168 and the 194 long life the one that I used was the 168 and it works well
Nice - good to know! Thanks for sharing that.
I love this video. What number are the light bulbs ?
They are T10 and T5 bulbs. The T10 are the bigger ones.
@@HowSkills Thank you. So, the ones you replaced are the T10s ?
Yes, those were the ones I replaced.@@dinorossi6611
Are those 194s for the overall illumination of the dash?
Pretty good for doing all that with just one hand (while the other hand is filming).
Lol! I’m not all that good!
Hope you have something for a 2003 corolla too
How many bulbs are required?
I wanna change all my leds for the cluster and heat control to change their colour .How many T5 and T10 leds I have to buy?
For the instrument cluster, I believe you'll need 3 T10 and 14 T5 bulbs. The Low Fuel Light also takes a T10, if I remember right. Not certain, but I believe the Heat Control bulb is a T5.
how many bulbs will i need all together to change all my dash lights to LED? thanks
Great video. You made it easy. One question though. Do the bulbs need those thin plastic covers? Mine were kind of dry rotted and didn't come off in one piece. It's a '99, so I guess it's not so shocking that after 20 years they might not be in great shape.
No, they don’t need them, they just add color to the light they give off. You can buy new covers if you want them, but without them, your dash lights will just give off white light. Some of mine were brittle too!
@@HowSkills actually, I just bought orange replacement bulbs. Problem solved. Lol.
@@HowSkills Those little bulbs though! Omg. Even with my bifocals AND a lighted magnifying glass, I couldn't tell if any were blown out. Lol. I'm thinking of just replacing them all to be on the safe side. Lmao.
I replaced some too that weren’t burnt out just to be safe so I wouldn’t have to do it again right away.
I replaced busted bulbs on the dashboard of my 1995 Corolla. But after replacement my car won't start. Other lights won't lit either. Can you give me some advice on what to do? This is the second time I replaced the bulbs and twice this happen. Thanks in advance.
Awesome, going to have to do this for my fuel gauge. Any clue what happens if you leave the color covers off? Does that make the light white?
Yes, it will make the lights shine white, so really no harm done. You just won't have the original colors showing up on the dash. The covers can get brittle over time, so they could even rip when you try to take them off the old bulbs, or put them on the new lights. So, you might not even have a choice about it. Thanks for watching!
How do you determine the right bulb to use for dashboard? Thank you.
The main bulbs are 194 (T10 Led) and T5 bulbs.
This is awesome! I need to replace lights for speedometer. Do you know if I can get the bezel and cluster out if I don't have a tilt steering wheel? I'd rather not unscrew and lower the steering column. thank you! I have a flashlight stuck on my dash to see at night! ha ha Time to replace the bulbs!
Yes, this can still be done withour having to lower the steering wheel, and here's a link to another video that shows how someone did it on their Corolla: th-cam.com/video/x5ykET2mdsE/w-d-xo.html
@@HowSkills Sweet! Thanks for confirming and the additional link. Mine's a 2001 Corolla so it should work.
@@HowSkills Okay but the link to the video shows a 93-97 Toyota Corolla.
@@greetingsfromchilliwack5702 Yes, sorry, but that was the only one I could find that seemed relevant. It does at least show how someone was able to remove the bezel on a Corolla without an adjustable steering column. Hopefully that will get you headed in the right direction.
not illegal
I noticed that your temperature gauge wasn’t moving . And the same thing happen to me when I switch my radio for an after market one. Any ideas to fix it ?
Sorry, but I don’t know an easy fix for that one. I’m going to research that.
Are there only 3 x 194 size bulbs for the main light on the instrument panel ? I read on some website mentioned there are 4 x 194 bulbs for the main light on the panel. If you don't mind please kindly help to verify how many 194 bulbs are needed. Thanks
I honestly don't remember, but I believe I bought four, so I would play it safe and buy four, as they are relatively inexpensive anyway.
Actually you can pivot the gauge assembly without disconnecting the cables, the harness is long enough. Then you are looking it at the back upside down. Remove the bulb with the boot on, then roll the boot off. If you pull on it it may tear. The boot is not necessary. It will give the gauges an orangy-yellow color without the boot.
What size bulbs
The main dashboard instrument bulbs are the T10 bulbs. I have some links to the bulbs in the video description. Thank you.
how did you remove the burnned out light from that housing???
If I remember right, I ended up using needle-nose pliers.
Is it possible to change the color as it not to be green lights but white lights or red or even blue?
Yes, the bulbs come in several different colors, and a lot of people change the color of the dash lights.
You did not mention about fixing the speedometer cable which is also attached to the dashboard at the back ,,,
I've never had to do that - is that a fairly simple fix?
that car has an electronic speedometer
Hey boss, could you please tell what is the bulb model ?
The bulb model number is a T10. There is an affiliate link in the description of this video to some of these bulbs on Amazon. Thank you for watching!
Do you know where the fuse for the cluster light is located?
I believe that one is either number 18 or 24 in the fuse box on the lower section of the dashboard on driver's side - yours might be behind a small tilt down storage pocket. I don't have that vehicle anymore, but I believe that's the correct one.
Is it kinda of the same thing on a Toyota corolla, 2004
Mine is a 2010 matrix how do I change the bulbs