Bobcat CT2025 with BH76 backhoe Removal Compact tractor
ฝัง
- เผยแพร่เมื่อ 2 มี.ค. 2021
- I am not a profesional or even an ameteur youtuber please bare with me , I made this video due to the lack of even one video on the Bobcat compact tractor CT2025 with BH76 backhoe and how to remove and attach it.If you would like to see anything else on or about this tractor let me know and I will do my best to make a video on it.
- ยานยนต์และพาหนะ
Helpful video, would have been helpful to do the hose disconnect. Thanks for the help!
my wife and I are strongly considering purchasing one of these, and I'm amazed by how little is available on them.
Thank you for your effort. I'll likely need this video again in a few months
I took delivery of a CT2025 with the backhoe. I wasn't home when they delivered it so your video taught me how to remove the unit. Thank you! Now I need to know which hoses to connect back so I can use my 3 point hitch. You left that part out of the video. I gotta tell you, so far I've used the backhoe as much as my front loader. I love it.
Your "Operator's Manuals " WILL tell you EVERYTHING ya Need to know.
thanks so much, Tony. there's hardly any info on these Bobcat CTs. I've had the CT2025 since last June.
Thanks for the Video. I'm dealing with this same issue right now. Ordered this bobcat unit in January. finally showed up a few weeks ago and they don't seem to know how to install the backhoe. They say they are fighting with the pins. Your video makes it look simple. Thanks again.
They are probably over thinking it , it is simple if they are the slightest bit mechanically minded .hope they get it done correctly for you . Good luck.!!
Hi guys, I installed my backhoe yesterday and I think that the problem the dealers are having is that the holes on the rear bracket may not always align properly. I had to machine the 2 holes on the bottom of the bracket out .050” for clearance I also had to open up a hole on one of the small brackets
You video ,You should mention moving the Joy stick all four ways to release pressure before disconnecting the houses.
You just did.
Thank you for this video. I just got my bobcat redeliverd with backhoe attached. I will need to take it off in the future, to utilize all my other 3 point attachments.
I have the bobcat 2025, showcased on New Tim Allen show. I will try to post videos of it in the future for you all.
It is signed by the Tool Man.
That’s awesome !
Super important and you didn't mention it. Connect the red and yellow hydraulic lines together otherwise you will damage your system. I specifically asked and the dealer also told me to just dust cap it. I realized immediately when the machine sounded weird. Pulled the backhoe manual and it says to connect the two so hydraulic fluid can keep circulating.
Yes I forgot about it on this video but on the next one it is shown. Connecting the red and yellow enables the 3pt but unconnected will not damage anything because the flow isn’t active unless you try and move your 3pt at which point it will not move .because it’s not being diverted .
@@tonykimbrell3254 that's interesting I didn't know that. What made me check was I started my machine and I heard squeeling. Shut it off checked the manual made the connection and the noise went away. Figured it needed circulating. I know other machines it's mandatory to close the loop. This is my first bobcat compact.
@@tonykimbrell3254 update to this discussion. I disconnected red yellow while machine was idling and the machine went under heavy strain and stalled. So I do believe there is circulation.
thank you, I have the exact same set up and have yet to remove the hoe. This video was great!
I'm about to purchase one of these. Thanks for the video.
I am planning on doing more videos , I’ve just been busy trying to get a French drain completed before it rains again . You will enjoy it , I have been very impressed with everything I’ve done so far with mine . I was told 25 hp wouldn’t be enough and it’s been more than enough for my use and I think I have used it hard .
@@tonykimbrell3254 Well I've have 1 more year before I retire. I know once I retire I can't afford anything like this tractor. But I think I'm going with the CT2040 Dig Boss. I run heavy equipment for my job hence I want HP. LOL . I also have an old Bobcat skid steer with lots of attachments. I can use them with this tractor. I have a lot of things to do with this tractor after I retire. Again thanks for video. You helped me make my decision . Good luck with the rest of your videos. I'll be watching.
Awesome video !!
Thanks for the video. I have a few questions for you and sorry to hear about your stroke., hope you are doing well.
When you purchased the CT2025 did it come with the subframe or did it come when you ordered the back hoe?
I have an older CT235 (09) and was unable to get a FEL for it. So had to go the after market route.
Just wondering if it is possible to retro / reverse engineer a means to install a BH76 on my rig. Would like to get your thoughts.
Trying to stay away from 3PTH style..
😎👍
Thanks for the video! Not much out there on the Bobcat. I got mine yesterday! I didn’t want to wait for the dealer to install the backhoe so I’m going to try to do it myself today. It’s pretty straight forward the only thing I’m concerned about is how the 3 hydraulic hoses attach to the tractor. Would it be possible to send me a pic of how yours is connected?
Will do , may be a little later today after we run some errands .
I went and looked and there is now way to get a good pic or video without removing the seat mount and the passenger side rear tire , I did find it in the backhoe manual on page 35 for the bh76 . Email me at tony32514@gmail.com and I’ll send pics with instructions if you don’t have the manual .
I’ll send you a email thanks for helping out
When I first got my backhoe a couple weeks ago it was a tight connection to the tractor but after a couple weeks of use it seems have some play in it. Does yours bounce a little in the mount?
Not at all , check all the bolts to the subframe you can get to and then detach the backhoes and check all the others . I check mine Everytime I detach it but haven’t had any loose yet but I have seen one guys that his subframe broke due to bolts that vibrated out from the subframe .
@@tonykimbrell3254 I'll check thanks
Hey Tony- im considering your setup. Im also looking at kioti tlb. Did you compare the two tractors. I like The bh setup on the bobcat better. I think the kioti loader may lift more. Thanks for the video of the bh.
Which kioti are you looking at ? It’s my understanding that the 2610 is the compatible tractor . I didn’t mention in video but the biggest deciding factor on my decision was the break out force on the backhoe bucket curl at I believe around 3200 plus lbs vs the competition at around 2300 lbs . I had to break som big roots digging a French drain that actually surprise me when I dug it . I will post a future video when it dries out and I can finish the drain which also has more large roots to break .
@@tonykimbrell3254 yes 2610 and corresponding loader and hoe. The kioti has some pretty high specs, but it has supports that run under the tractor and eat ground clearance. Love to see more vids of your setup.
@@vtdrive129 that’s subframe that tan under the tractor which also takes up floor space when detaching the backhoe is what steered me toward the bobcat . It may not be an issue for some but it just seemed too much for me to store indoors in my shop . I will do a video soon showing complete detach of backhoe and show space it takes up and put a link to the kioti backhoe detached and maybe some pics of the kioti detached backhoe as well.
@@tonykimbrell3254 cool. I have an ls xr3135,tlb, and the bh mount is similar to kioti and it drags on EVERYTHING.
I have no power to my 3 point, do I hook up a hose after removing the backhoe?
Hey Tony I'm getting the CT2040 next Friday. Can you tell me what controls the backhoe has ? I 'm used to the case controls. My search hasn't found out for sure.
When I get back home this afternoon I will make a short video and post the link .
th-cam.com/video/joLW_VGyZKo/w-d-xo.html
I just received my CT2025 and a BH76 uninstalled. Subframe instructions where included, but not the hydraulic. Dealer is slow to respond because COVID in our area has people working from home. The manual for the backhoe is also still to arrive. Could you show some video or pictures of the 3 hoses, the route going forward on the tractor, and where they connect. It would be greatly appreciated so I can hook up and test the backhoe functions.
Send me your email and I’ll email what I have to you .
Tony32514@gmail.com
Hi Tony, super novice here, never owned a tractor, I ordered the C2025 and would like to learn how to maintain it, small stuff oil change etc.
Thanks in advance if you can help.
Your "Operator's Manuals " WILL tell you EVERYTHING ya Need to know about yer "Trak-tor ". Just don't "wing it" with flunky Utube vidios.
What was the sticker price on this tractor I’m looking for the same one
Mine was $23999 out the door but apparently that was a great deal from what I’ve seen in the bobcat tractor group on Facebook for fel and backhoe .
@@tonykimbrell3254 Indeed, if you paid that WITH the backhoe you did well. That backhoe is expensive but worth every penny once you use it.
Open your mouth and use your speaking voice. Don't be shy I can barely hear you man.
Sorry, I had a stroke recent to the video paralyzing half my face. I am working on it and will try to do better next time.