I just replaced my MG30 with a Trident , your videos are always a HUGE help when it comes to getting the most out of these fantastic units . Just wanted to say thanks !
Hello, purchasing a Trident. I felt the lack of more overdrive and distortion pedals, to act in parallel with the buster, without having to use amplifier simulators. Connecting directly to the amplifier input.
Hi. Do you mind explain more on 7.28 of the video? Lets say i have set preset A-1 to my own chain and parameter. Pressing the knob would allow me to use the initial factory preset ? Means i can press that to easily toggle between 2 presets?
Dear Nux Team, There's one thing that's not entirely clear to me. If you have both reverb and delay engaged, and you turn the knobs on the delay/reverb block, which effect will it adjust? Thanks! Really looking forward to this device. ;)
Bonjour, pourrais tu me dire si il est possible d'assigner un programme change sur un preset ? Par exemple si je veux le PC 2 sur le preset 01 A du Trident. Je n'ai pas trouvé comment faire, dans le menu MIDI il y a seulement le changement de canal 1 à 16 et PC in on/off et PC out on/off ...
I bought the Trident a week ago, and am totally loving it. However I ran into a big issue at my first gig with the Trident a night ago. With my big feet, I managed to engage two switches simultaneously - this froze the unit and the volume cut out totally. After a bit of frantic tapdancing on the switches, I managed to engage another patch and brought the unit back to life. I asked a group of Trident users on Facebook to see if they could replicate the problem on their units by pushing the two switches simultaneously. They could, so it is not just my Trident playing up. Can this be sorted out with a Firmware update?
if you look at the very very old pod xt live floorboard the controls are simple to use i wish the companies that make touchscreen only controlled floorboards or effect units would have a work around if i buy a helix i'd have to ask someone to program the thing for me companies don't understand visually impaired ppl play guitar too touchscreens make it impossible lol i'd rather do my tapping or sliding on a fretboard than on a touchscreen thanks
I have plenty of NUX products but this one is just a cash grab. Let's face it, it's essentially a Cerberus with a few extra footswitches & the screen is embarrassingly outdated. I have the MG- 30 & this latest offering comes nowhere near it..!
While everyone is entitled to their opinion, there's really nothing technically in common with the Trident and the Cerberus, aside from the shell, knobs, and switches. It's a completely new product from the ground up. A brand new audio engine, and more.
I just replaced my MG30 with a Trident , your videos are always a HUGE help when it comes to getting the most out of these fantastic units . Just wanted to say thanks !
You’re welcome
I have 2 Cerberus unit because it's in my setup. This is a very clear and well structured overview.
Thanks.
I like the hybrid design.. Great pedal for the club weekend warrior
Right on!
Hello, purchasing a Trident. I felt the lack of more overdrive and distortion pedals, to act in parallel with the buster, without having to use amplifier simulators. Connecting directly to the amplifier input.
Hi. Do you mind explain more on 7.28 of the video? Lets say i have set preset A-1 to my own chain and parameter. Pressing the knob would allow me to use the initial factory preset ? Means i can press that to easily toggle between 2 presets?
Not exactly. It means that you can toggle between the user preset and the factory preset.
Dear Nux Team,
There's one thing that's not entirely clear to me. If you have both reverb and delay engaged, and you turn the knobs on the delay/reverb block, which effect will it adjust? Thanks! Really looking forward to this device. ;)
Good question. The Delay and Reverb have their own independent controls, so there's no interference between the two effects. Make sense?
@nuxaudio Oh, I get it now, I think. Level, time and repeat apply to the delay. Level and decay apply to reverb. Like that? Thanks for the reply. DD.
Bonjour, pourrais tu me dire si il est possible d'assigner un programme change sur un preset ? Par exemple si je veux le PC 2 sur le preset 01 A du Trident. Je n'ai pas trouvé comment faire, dans le menu MIDI il y a seulement le changement de canal 1 à 16 et PC in on/off et PC out on/off ...
I bought the Trident a week ago, and am totally loving it. However I ran into a big issue at my first gig with the Trident a night ago. With my big feet, I managed to engage two switches simultaneously - this froze the unit and the volume cut out totally. After a bit of frantic tapdancing on the switches, I managed to engage another patch and brought the unit back to life. I asked a group of Trident users on Facebook to see if they could replicate the problem on their units by pushing the two switches simultaneously. They could, so it is not just my Trident playing up. Can this be sorted out with a Firmware update?
if you look at the very very old pod xt live floorboard the controls are simple to use
i wish the companies that make touchscreen only controlled floorboards or effect units would have a work around
if i buy a helix i'd have to ask someone to program the thing for me
companies don't understand visually impaired ppl play guitar too
touchscreens make it impossible
lol i'd rather do my tapping or sliding on a fretboard than on a touchscreen
thanks
Can you move the noise gate to go after overdrive or amp blocks or is it fixed at the front of the chain?
You can adjust the position of every signal block.
J en bave d avance très bonne vidéo merci.
Hi. In phrase loop feature, how can you overdub different preset over previous preset without changing previous one?
We will have a video out soon that will cover the looper.
How many of the foot switches can trigger a preset? Thanks
moga2x bisa kebeli
can it be used for bass guitar as well?
Not yet
@@nuxaudio "yet" means someday it maybe can? Possibly By firmware updates maybe?
Can you extend the number of patches per bank up to six by changing the function of the upper footswitches?
No, the max patches per bank is 3. But if you want more footswitches you can easily do that with MIDI. I will demonstrate this in the near future.
@@nuxaudio Thanks. I think NUX missed a chance here. With - let's say- 5 patches per bank the Trident could be a frontrunner.
@@michaelreinke4595 Thanks for the feedback
Can someone tell me if there is share library to trade patches with other users?
i like nux produck.. i make nux mg30 know
This concept has already been done in several other units...Zoom, TC Electronics, etc... This is for a beginner and not a professional musician...
Ok 🤷♂️
Your hand blocked everything!
I have plenty of NUX products but this one is just a cash grab. Let's face it, it's essentially a Cerberus with a few extra footswitches & the screen is embarrassingly outdated. I have the MG- 30 & this latest offering comes nowhere near it..!
While everyone is entitled to their opinion, there's really nothing technically in common with the Trident and the Cerberus, aside from the shell, knobs, and switches. It's a completely new product from the ground up. A brand new audio engine, and more.
Best of both worlds. I do regret that the analogue drive and distortion has been replaced by a digital copy of many drives.
They are pretty decent drives and dist@@tornadoluke