OSHA would have gone insane if it saw this. You are leaving out protective features and it has no shield for the grind disc incase it explodes and learn to hold the thing properly or you'll be left without your fingers
@@mrtthomemade no no actually I want to make a angle grinder that I used in a project so I want to know that this motor has enough torque and another thing I want to ask that how to run this motor without ese continuously please reply me
This motor does not have enough continuous torque. As for running without esc, I haven't figured it out yet. If you find a way to run without esc, please let me know.
safety...... you still have 5 fingers, 2 on this hand and 3 on the other. that said, try to use the discs as weight inertia where the spacer is put. it will have more power before it stops and a bigger slow down curve.
@@mrtthomemade Thanks for the reply sir. I have found the problem. When I connect it with sata cable, it works perfectly. Motor not runs after removing sata cable from computer and hard drive.
How many adverts did this video have in it? = money sucker 😠, he only wants us to watch the advertising [cashcows] and not the video itself/recreate the contraption featured in the video ~ In this case the thing is dangerous and awkward; a DIY angle grinder with no shield and powered by the original HDD PCB > a repurposed PC PSU for 12v
Please watch for reference and entertainment only, do not follow this at home. Thank you for your comments ❤️
😊 yes reference and entertainmes is generasi for any more people... But let me follow litle litle 😂
OSHA would have gone insane if it saw this.
You are leaving out protective features and it has no shield for the grind disc incase it explodes and learn to hold the thing properly or you'll be left without your fingers
You are very right, thank you for your comments👍
Bro can you tell me this motor has enough torque to make grinder or a drill machine using gearbox
I'm not sure it's safe, I recommend you don't do them.
@@mrtthomemade no no actually I want to make a angle grinder that I used in a project so I want to know that this motor has enough torque and another thing I want to ask that how to run this motor without ese continuously please reply me
This motor does not have enough continuous torque. As for running without esc, I haven't figured it out yet. If you find a way to run without esc, please let me know.
Safety features left the chat.
Gupta Electronics53
Great job!!! Thank YOU for video!
Gupta Electronics53
Circuit wise it is a really good circuit. I wanna know more about driving the motor. How can i contact you?
You can refer to other videos on youtube. Thank you for your interest.
Gupta Electronics53
Big brain
and simple
safety...... you still have 5 fingers, 2 on this hand and 3 on the other. that said, try to use the discs as weight inertia where the spacer is put. it will have more power before it stops and a bigger slow down curve.
Sir, my hard drive is not running after I removed all internal parts. I have tested with computer's smps power supply. Please tell me the reason.
Check the power supply, if the power supply is ok. Maybe the hard drive is broken.
@@mrtthomemade Thanks for the reply sir. I have found the problem.
When I connect it with sata cable, it works perfectly. Motor not runs after removing sata cable from computer and hard drive.
Brow... Me hardisk spin for 7 second only .. and the off😊😅
I do not recommend you to do it. Please use specialized tools.
We make horizontal grinder not hand...
use 7805 ic then it will work permanently 😊
Nice videos 👍
Nice 👍
❤❤❤👌❤❤❤That Good..!
HD SEAGATE SATA NÃO FUNCIONA
This is hilarious
Зачем если есть очень дешевые болгарки на аккумуляторе 12в которые мощнее в раз 5 и стоят они дешево
What do you mean, why not buy cheap machines?
please use 3'' not 4'' or 5''
It measures 107x1.2x16mm
That power supply looks like its about to explode...
You can use another source with greater capacity.
The way you hold the grinder really makes me anxious. Be careful aight?
Thanks
not safe
How many adverts did this video have in it? = money sucker 😠, he only wants us to watch the advertising [cashcows] and not the video itself/recreate the contraption featured in the video ~ In this case the thing is dangerous and awkward; a DIY angle grinder with no shield and powered by the original HDD PCB > a repurposed PC PSU for 12v
FAKE! LIE!
true the motor is too small but has about 14000rpm and a high toque
jump pin 2 and 6 in data connection
Great suggestion
Saudações
Sua dica é ligar o pino 2 ao 6?
Serve para por o motor em movimento?
Agradeço
Stupid at a higher level. Just because you can doesn't mean you should. You must be a regular at the emergency department.
I will pay more attention, thank you very much.
Saludos, creo como referencia y valentía, el video está bien para iniciar proyecto, pero más seguridad!
Gupta Electronics53