I have the problem to install an external potentiometer. Which parameters must be set? My inverter is HY01 D523B. My inverter works good, but only with the board potentiometer.
sr the frequency in use is 60 HZ AND THE FREQUENCY OF MY MOTOR IS 50 HZ. THE PARAMETERS P0.03 60HZ, PO.O4 60HZ, P0.06 60HZ, AND FOR THE MOTOR P2.02 50HZ Is this correct? thank you
Hi, how to cable 0-10V for software control of spindle RPM and how to cable to switch sindle on/off (I use Estlcam, but guess the cables will be the same). Via the operating terminal I can control the spindle correctly. I have: 1) Spindle on/off: Adurino CNC Shield SPN, 5V and GRND --> Relais --> FU input: FOR & ACM (upper deck of control circuit terminal) 2) Spndle RPM: via 0-10V Unit --> FU input: V1 & ACM (lower deck of control circuit terminal) FU program: PD001 = 1 ; PD002 = 1 ; Thanks for your help! BR, Ben
GT series, 4.0 kw can support braking resistor. HY series products, by default, do not support braking resistors. Braking resistors need to be installed during factory production
i know im randomly asking but does any of you know of a way to log back into an instagram account..? I was stupid forgot the account password. I appreciate any tricks you can give me!
@Leonel Dangelo thanks so much for your reply. I found the site on google and im in the hacking process now. Takes quite some time so I will reply here later when my account password hopefully is recovered.
@@huanyanginverter6516 how can i add the Brake function Then? The manual clearly Shows how to Wire IT etc. How do i Know if My vfd has that function? Thanks alot!
The for indicator light flashes to indicate that it is not running. If the for indicator light remains on and is displayed as 0, it indicates that the speed is 0
I have the problem to install an external potentiometer. Which parameters must be set? My inverter is HY01 D523B. My inverter works good, but only with the board potentiometer.
sr the frequency in use is 60 HZ AND THE FREQUENCY OF MY MOTOR IS 50 HZ. THE PARAMETERS P0.03 60HZ, PO.O4 60HZ, P0.06 60HZ, AND FOR THE MOTOR P2.02 50HZ Is this correct? thank you
If I have a 5 kw and 7.5 hp lathe, I want to know what parameters I use if the lathe is working with wood and I want it to stop instantly.
You can adjust the speed and deceleration time.. And then you also need to equip it with a braking resistor
Hi, how to cable 0-10V for software control of spindle RPM and how to cable to switch sindle on/off (I use Estlcam, but guess the cables will be the same). Via the operating terminal I can control the spindle correctly.
I have:
1) Spindle on/off: Adurino CNC Shield SPN, 5V and GRND --> Relais --> FU input: FOR & ACM (upper deck of control circuit terminal)
2) Spndle RPM: via 0-10V Unit --> FU input: V1 & ACM (lower deck of control circuit terminal)
FU program: PD001 = 1 ; PD002 = 1 ;
Thanks for your help!
BR, Ben
th-cam.com/video/2VXMxxa6lXM/w-d-xo.html
Which VFD supports a braking resistor? HY series?
GT series, 4.0 kw can support braking resistor.
HY series products, by default, do not support braking resistors.
Braking resistors need to be installed during factory production
Hi. Is it possible to use a 3kw VFD for a 2.2kw spindle?
You can use
i know im randomly asking but does any of you know of a way to log back into an instagram account..?
I was stupid forgot the account password. I appreciate any tricks you can give me!
@Deshawn Iker Instablaster =)
@Leonel Dangelo thanks so much for your reply. I found the site on google and im in the hacking process now.
Takes quite some time so I will reply here later when my account password hopefully is recovered.
@Leonel Dangelo It worked and I finally got access to my account again. I am so happy!
Thank you so much, you saved my ass :D
how can i connect a braking resistor? i cant get the resistor to slow down the load.
By default, the purchase does not support the brake function.
Pd015 parameter is deceleration time
@@huanyanginverter6516 how can i add the Brake function Then? The manual clearly Shows how to Wire IT etc. How do i Know if My vfd has that function? Thanks alot!
Opa boa noite você pode invia o manual
Dese inveso pramim
My one show everything fine , also the fuse is ok ... but the motor doesent start ...
The for indicator light flashes to indicate that it is not running.
If the for indicator light remains on and is displayed as 0, it indicates that the speed is 0
@@huanyanginverter6516 ... no, it whas my fault, the Converter is fine, the lathemainswitch whas in "0" Position... it must be done by Workshoptwarfs🤣
PD4=400 does not work. I set 50, that works. Thank you for video!
very good
@@huanyanginverter6516 Please help me to set the parameters for external potentiometer. Thank you very much!