this is a very comprehensive; chock full of info video feed..great presentation..will watch it through a few more times and share with others..magnifico ? (such a word??)
Thank you for your feedback. I tried to cram as many info as I could think of in it. I hope it helps. I'd really appreciate it if you share it with others ^_^
Sorry to be so off topic but does anyone know a tool to get back into an instagram account..? I stupidly lost my account password. I love any assistance you can offer me.
as a grandma, I am trying to control my cussing... and this saw certainly contributed to my use of 4 letter words.. you have helped me enormously with my goal :) thank you...
I actually went ahead and purchased this saw after watching your video. I really love how light it is. The knowledge you share with us is so helpful and your videos are topnotch.
Thanks!!!! I tried my best to deliver informative videos. I'm glad you enjoyed your saw! Looks like my video will be featured in the upcoming Knew Concepts monthly newsletter so keep an eye if you're a subscriber :D
Great tip on backing sandpaper with duct tape, easier on the fingers and a mark noting grit can be helpful, too. You truly are a gifted artist and teacher. Good Luck!
🌈You are an excellant teacher! Really good tips with a great video. Where did you get your bench pin? Did you customize the extra notch? I'm glad I found you🎉
Excellent video, Kharisma! Thanks for all the tips and tricks. I love the silicone idea and extra bracketing on the bench pin. Thanks so much for taking the time to make these cool and helpful videos.
I just found your channel and great tutorial. Do you no longer have the purchase patterns available for practice? I looked on your site and Craftsy and did not find. Thanks.
Thank you SO much for this informative video! I am just starting out with the saw and am having one neck of a time, I think this saw will help with a lot of my issues. Also,What gauge sheet do you like to use best in silver also sterling or fine?
for cutting copper, what types of blades do you recommend? I break my blades more with copper, even if I change the size of the blade for higher or lower... doesn't help!!!
I use 24 to 20 ga copper, and depending on the size use from 1 to 3/0 depending on the thickness but I've tried them all on every gauge and it sticks a lot even with cut lube so I'M not sure how to go about it. (I'm self taught lol) I used a diagram for thickness vs Saw blades maybe it's not right for copper.
this is a very comprehensive; chock full of info video feed..great presentation..will watch it through a few more times and share with others..magnifico ? (such a word??)
Thank you for your feedback. I tried to cram as many info as I could think of in it. I hope it helps. I'd really appreciate it if you share it with others ^_^
Sorry to be so off topic but does anyone know a tool to get back into an instagram account..?
I stupidly lost my account password. I love any assistance you can offer me.
@Iker Emanuel instablaster ;)
as a grandma, I am trying to control my cussing... and this saw certainly contributed to my use of 4 letter words.. you have helped me enormously with my goal :) thank you...
I actually went ahead and purchased this saw after watching your video. I really love how light it is. The knowledge you share with us is so helpful and your videos are topnotch.
Thanks!!!! I tried my best to deliver informative videos. I'm glad you enjoyed your saw! Looks like my video will be featured in the upcoming Knew Concepts monthly newsletter so keep an eye if you're a subscriber :D
Thank you so much for this. It answered all of the questions I knew I had, and several more that I didn't know I needed to think about.
Great tutorial! I haven't tried sawing yet, but your tutorial make me want to give it a try. Thank you!
Great tip on backing sandpaper with duct tape, easier on the fingers and a mark noting grit can be helpful, too. You truly are a gifted artist and teacher. Good Luck!
Thank you! ^_^
🌈You are an excellant teacher! Really good tips with a great video. Where did you get your bench pin? Did you customize the extra notch? I'm glad I found you🎉
Excellent video, Kharisma! Thanks for all the tips and tricks. I love the silicone idea and extra bracketing on the bench pin. Thanks so much for taking the time to make these cool and helpful videos.
My pleasure. Happy to hear my videos have been helpful to others.
Best Knew Concept saw/sawing video I've seen!
Thank you for your high praise, Marlene :)
Thank you so much. Love your videos. The info has helped me tremendously !
this is such a high quality, wonderful tutorial! you're awesome!
wow!!!!!!! Very informative! thank you so much!
I just found your channel and great tutorial. Do you no longer have the purchase patterns available for practice? I looked on your site and Craftsy and did not find. Thanks.
GREAT video! You are too cute. Subscribed! Can't wait to learn more. Thank you so much hun!
Thank you, Bianca! 🤗
Thank you SO much for this informative video! I am just starting out with the saw and am having one neck of a time, I think this saw will help with a lot of my issues. Also,What gauge sheet do you like to use best in silver also sterling or fine?
Sterling silver. fine is too soft for most jewelry application. The gauge depends on the things you wanna make. I use anywhere between 26 - 18 ga.
I like your videos very much, they are intructive and funny and you are an amazing artist!
Thank you. ^^
Red silicon baking sheet? What, where to buy (the right kind) Is it flexible? Do you have a link? Thanks so much.
It's something like this, Gabby. amzn.to/2D4bTwf
It's flexible and can be cut easily. I think a box cutter would cut it better than scissors.
Good tips! I particularly appreciated the ones about NOT annealing before sawing and the benefits of .25 pt lines. Thanks.
Happy to hear the tutorial helps!
thank you for the great tips.
hola que es eso rojo que tiene tu astillero
for cutting copper, what types of blades do you recommend? I break my blades more with copper, even if I change the size of the blade for higher or lower... doesn't help!!!
I use the same brand for everything. Did you lube the blade?
yes always, I have bees wax and cut lube
it is a great video and thanks for sharing :)
Can you provide me with more information? What gauge did you cut in copper and what size of blade did you use?
I use 24 to 20 ga copper, and depending on the size use from 1 to 3/0 depending on the thickness but I've tried them all on every gauge and it sticks a lot even with cut lube so I'M not sure how to go about it. (I'm self taught lol)
I used a diagram for thickness vs Saw blades maybe it's not right for copper.
Outstanding tutorial!
Thanks for sharing . Very informative.
Grazie
What does Popni (cute) mean?
POPular, uNIque, and CUTE 🤓
Very clear descriptions and instructions. Excellent! Thank you.
Glue on with what? 2-part epoxy???
I used E-6000 because it's what I had at that time but 2 part epoxy or silicone glue might be a better choice. amzn.to/2D00Tjv
I’m just subscribing because your beautiful square face 😍
you are so cute - thanks for the fun instructions.
you are the best girl! :o)))
Nice video and nice work. keep it up. ONT.....o~*o.....Ride....On........
Hands down the worst saw I've ever purchased. Genuinely worse than a $10 dollar saw.