PJ HD Equipment Tilt (TJ) Walk-around
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- Walk-around of the all new PJ HD Equipment Tilt (TJ). The TJ is equipped with two Dexter 8k torsion axles, giving it a 16,000 lbs GVWR. The deck is 82" wide allowing you to load wide equipment like tractors and skidsteers. It also has a knife-edge tail for easy loading of forklifts and scissor lifts. Another great feature is the hydraulic cushion tilting bed.
Learn more at
www.pjtrailers....
Don’t the 6” sandwiches make the tie points weak?
PJ Trailers
You should make the Trailers with 83 Inch inside wheel wells -
Before we sold our Skid Loader ours had the spacers on it. So we needed all the room between fenders we can get.
I'm sure others could use that space as well. The Trailer we had was 83 Inches inside.
Great suggestion Dave! I will pass it on!
PJ Trailers is there a width difference on trailers with the 7k axles vs 8k
Yes, the drums are wider on a 8K compared to a &k axles, which is the reason for the narrowed tilt deck compared to the T6. You can also tell by the fenders being 1" wider on a trailer with 8K axles!
i need one 20 or 21 feet long 831/2 or so wide between fenders and instead of split tilt deck i want it full tilt power deck.
503 583'6200 how soon can you have one available and how much...im in Oregon
Weigh what is the total weight
I've owned two PJ trailers now but what I would really like is a dual axle T1 with the mitered corners, bullnose bumper on the fixed deck, and electric or hydraulic disc brakes.
Can you angle the dovetail section about 4 degrees down to reduce loading angle.
How does the cushioning cylinder behave when it's below-zero cold out? I can see the oil getting thick enough that you'd have to have something to push down on an empty bed, either to load or latch back down.
We have not heard any negative feedback at this point.
I have one and when its cold out i just stand on the rear of the trailer and it tilts slower but doesn’t take much. You can also adjust the proportioning valve to make it easier in colder weather.
What is a pipe spool ? Talked about in relation to the rub rail and stake pockets at ~1:13.
It is a round spacer pip between the stake pockets you can hook a chain to if needed
Hello, where do I get this project, do you have any website?
We have dealer locations across the US, you can find dealers near you @ www.pjtrailers.com/locations/
More info on the T1 @ www.pjtrailers.com/trailers/tj-hd-equipment-tilt-6-inch-channel
Do you all make a 10k gvwr trailer like this or similar in a tilt?
We can de-rate out T6 model trailer down to 9900!
For information and pricing please visit us on the web at www.superior-trailer.com
Need one under 2500 lb
how much
Hello, Gerardo Espinoza! We sell exclusively through our dealer network. Connect with one of our dealers to get a price. Go to www.pjtrailers.com/locations/
When you find your nearest dealer, click 'Request a Quote' and a dealer will contact you with pricing information!