@2XAllState I agree with Nitra2710. Everyone has a wave pattern from birth. You cant cut them out. It looks like the waves are cut out when you go against the grain because you're using a guard that is too low. Waves are curls that are laying down. If u cut against the grain too low then you'll cut into the curl thus makin the hair straight. a 1 1/2 with the grain will do the same as a 2 against the grain. You have to look at the hair to see the size of the waves and the coarseness of the hair.
@dplogan Your barber went to low then... The lowest dark Cesar is a 1 with the grain... Which is the same length of a 2 against the grain... If your barber used a 2 against the grain you would not be missing any waves... now if he went lower like using a 1 1/2 against the grain you will notice a big difference and most likely loose the waves that don't stand out as much
ACtually i have to disagree with you, you CAN cut waves against the grain. the waves have to be deeper and you have to cut high a higher guard. if someone has been waving for a long time and their hair is trained, you could do a #3.5 ATG and it'd be pretty much the same as a #2 WTG or so. their waves just need to be deeper if you go ATG.
Nitra2710 is correct you can cut against the grain and will not cut out a person waves. The Key is to cut hair with the next biggest guard with the clippers half way open on a 90 degree angle. than come back and lay the hair down with 1/8th guard this will give u a even deeper defined wave pattern. this will truly get the hair even.
@shifty224 True cutting against the grain wont remove waves but if the waves are on point it will result in cutting too much off. When my trimmers arent charged I can use my regular clippers against the grain on my sides to take a bit lower before lining it up. Now if there are no waves ? Go for it all day the hair isnt trained to lay down a specific way.
yo....no hatin or disrespectin whatsoever.....i respect the grind...I cut hair too.....but to my understanding a ceaser is an all around even cut with a tape....looks like u gave my man a blow out? I dont know where you from but down here in FLA thats a blow out.....but yo seriously dude just tryin to clarify...not hatin on ya style cuz theres no question you can cut...be easy
yo....no hatin or disrespectin whatsoever.....i respect the grind...I cut hair too.....but to my understanding a ceaser is an all around even cut with a tape....looks like u gave my man a blow out? I dont know where you from but down here in FLA thats a blow out.....but yo seriously dude just tryin to clarify...not hatin on ya style cuz theres no question you can cut...be easy
2 questions... #1You went with the grain of the hair cause his hair is curly right?... I got straight hair & i go against the grain of my hair to cut it cause when i go with it, it doesnt cut sometimes #2 do i have crappy clippers or should i just keep cutting my hair against the grain?
@2XAllState i been cutting hair for 10 years young hommie... you will not cut waves out by cutting against the grain.... cutting against the grain is actually better than cutting with the grain because when you cut with the grain all the hair isint the same length....
@Nitra2710 I agree with @2XALLSTATE when he say never cut against the grain on a client with a wave pattern. You must not cut to much hair or ethnic hair because the golden rule is never cut against the wave pattern! It will cut the clients waves out of their head(if not all must)!! & I am a barber
@2XAllState Say bruh i have seen several videos here on youtube about how to cut hair, but i have to say you by far are the most detailed when it comes to explaining step by step that i have seen on here, good job bruh, this vid has really enlightened me.
@Nitra2710 Yeah I agee. Cutting against the grain doesn't cut the waves out. The pattern starts near the scalp not at the hairs longest point. Common misconception and a lot of barbers take flack for that.
yall do know this shit was posted in 09, yet yalll saying "too high on the taper homie you'll get it someday keep it up" its been almost 4 years and yall still saying the sameshit
As a barber I always start off with a big guard and go AGAINST the grain, and then I clean it up by going with the grain. But other than that, good cut!!!
@DpLogan good comment.cutting with the grain promotes waves by having longer hairs mix with the shorter hairs. you can cut against the grain but only on people who have waves naturally. with that being said if someone has to work hard for waves atg will most likely piss them off because they will be gone.
@dariogpb @2XAllState you are so right. Ive been licensed since '93 and I agree with you 100%. Against the grain is a cleaner cut. With the grain will not cut the hair even. The blades push some of the hair down and it doesnt get cut. Now with that said, it doesnt mean that cutting the hair with the grain is wrong. It really depends on the type of cut and what the customer wants. I always ask if its ok if I cut it against the grain and explain what the difference is.
Thanks for the info I am a baber / stylist & sometimes where i am from brother 's don't like to share real talent wit a fo real sista on cutt's if yo digg waht i am saying so know that WYE NOTT SHOP in TULSA OKLA loves it
Hey man, I love your content! Can you please make a video on how to blend a fade? I'm having trouble with blending a fade. I don't understand guidelines....
I cut against the grain ones on the back of the neck line ( it went bald )... Ended up having to fade it... So it all depends on the hair. This young man knows what he is doing. I have been in the business 27 years. Instead of taking the negative and bashing it in a vocal manner. Take the positive. He is giving you and run with it. Thank you. If you ever want to visit out barbershop. Holla!
You went a little too high on balding out the taper, but you fixed and gave him a clean blend. Solid work. I don't know why you have so many haters though. The second they see a barber's mess-up there all over it. Instead of discouraging other barbers we should be supporting. People like that aren't going to advance in this business. Peace.
this is actually one of the best barber videos i ever scene i recently started cutting my own hair got me a pair of andis liners and a pair of wahl clippers and he gives really good details of course its a little hard to transition to cutting my own head lol but he really helps
I enjoy your teaching and this my first time to join you. I hope will become a better baber like you as I keep on leaning from your video everyday. Thanks 🙏🙏
You can if they want you too, but if a client wants their waves then you cant or youll cut them out always ask the client
Thank you! Im sorry but id have to disagree with you on that
It was a nice video but the neck fade was a lil high.
it is highbeams black hair color spray
@2XAllState I agree with Nitra2710. Everyone has a wave pattern from birth. You cant cut them out. It looks like the waves are cut out when you go against the grain because you're using a guard that is too low. Waves are curls that are laying down. If u cut against the grain too low then you'll cut into the curl thus makin the hair straight. a 1 1/2 with the grain will do the same as a 2 against the grain. You have to look at the hair to see the size of the waves and the coarseness of the hair.
@dplogan
Your barber went to low then... The lowest dark Cesar is a 1 with the grain... Which is the same length of a 2 against the grain... If your barber used a 2 against the grain you would not be missing any waves... now if he went lower like using a 1 1/2 against the grain you will notice a big difference and most likely loose the waves that don't stand out as much
ACtually i have to disagree with you, you CAN cut waves against the grain. the waves have to be deeper and you have to cut high a higher guard. if someone has been waving for a long time and their hair is trained, you could do a #3.5 ATG and it'd be
pretty much the same as a #2 WTG or so. their waves just need to be deeper if you go ATG.
Nitra2710 is correct you can cut against the grain and will not cut out a person waves. The Key is to cut hair with the next biggest guard with the clippers half way open on a 90 degree angle. than come back and lay the hair down with 1/8th guard this will give u a even deeper defined wave pattern. this will truly get the hair even.
@shifty224
True cutting against the grain wont remove waves but if the waves are on point it will result in cutting too much off. When my trimmers arent charged I can use my regular clippers against the grain on my sides to take a bit lower before lining it up. Now if there are no waves ? Go for it all day the hair isnt trained to lay down a specific way.
yo....no hatin or disrespectin whatsoever.....i respect the grind...I cut hair too.....but to my understanding a ceaser is an all around even cut with a tape....looks like u gave my man a blow out? I dont know where you from but down here in FLA thats a blow out.....but yo seriously dude just tryin to clarify...not hatin on ya style cuz theres no question you can cut...be easy
yo....no hatin or disrespectin whatsoever.....i respect the grind...I cut hair too.....but to my understanding a ceaser is an all around even cut with a tape....looks like u gave my man a blow out? I dont know where you from but down here in FLA thats a blow out.....but yo seriously dude just tryin to clarify...not hatin on ya style cuz theres no question you can cut...be easy
2 questions...
#1You went with the grain of the hair cause his hair is curly right?...
I got straight hair & i go against the grain of my hair to cut it cause when i go with it, it doesnt cut sometimes
#2 do i have crappy clippers or should i just keep cutting my hair against the grain?
@2XAllState i been cutting hair for 10 years young hommie... you will not cut waves out by cutting against the grain.... cutting against the grain is actually better than cutting with the grain because when you cut with the grain all the hair isint the same length....
@Nitra2710 I agree with @2XALLSTATE when he say never cut against the grain on a client with a wave pattern. You must not cut to much hair or ethnic hair because the golden rule is never cut against the wave pattern! It will cut the clients waves out of their head(if not all must)!! & I am a barber
@2XAllState Say bruh i have seen several videos here on youtube about how to cut hair, but i have to say you by far are the most detailed when it comes to explaining step by step that i have seen on here, good job bruh, this vid has really enlightened me.
@Nitra2710 Yeah I agee. Cutting against the grain doesn't cut the waves out. The pattern starts near the scalp not at the hairs longest point. Common misconception and a lot of barbers take flack for that.
yall do know this shit was posted in 09, yet yalll saying "too high on the taper homie you'll get it someday keep it up" its been almost 4 years and yall still saying the sameshit
@JayriK562 yes i do
As a barber I always start off with a big guard and go AGAINST the grain, and then I clean it up by going with the grain. But other than that, good cut!!!
Now what if you don't have black ppl hair...stupid question but i seriously want it but im wondering will it luk good if u dont have black ppl hair
@dariogpb thats why u brush dunny..i get my hair cut with the grain and i got 360s...when i got it cut ATG all my waves on the side was gone...
Sweety, u cut alright but a true barber always has a comb in his/her hand......u really need to get in a school or college to tighten your skillz
I've noticed in some of his videos, he doesnt always use a guard. How is it possible he does not cut the person hair down to the scalp?
Who is the girl holding the camera she was looking like the highlite of this video you can cut young brotha but keep getting better.
No sir!
wtf? yoo im uh brooklyn barber that cut would of been laughed at ill teach you bro you look very interested in cuttin hair
whats goin on bro! how long were u in school for to get ya license ?? i can cut but i dont have license yet! hit me back!
the taper was ok but high because you needed to but the 1/8 on close then work til open that what i was told.
Chris Brown cutting hair now? I knew work was slowing down but damn! Joke over, thanks for the tutorial.
they got them brushes at dollar tree 3 in a pack for a buck at least that where i get mines
@DpLogan good comment.cutting with the grain promotes waves by having longer hairs mix with the shorter hairs. you can cut against the grain but only on people who have waves naturally. with that being said if someone has to work hard for waves atg will most likely piss them off because they will be gone.
cutting against the grain definitely doesnt cut off waves bruh...but haircut was nice tho
nice cut brotha! dude in the chair kinda looks like beenie sigal! thanks for the vid.
can yu post a vid on how to get those steve harvey lineups on customers???? Thanks
can someone tell how long to grow your hair out until it look like his hair.
i mean, i respect him tho. he just tryna do his thing. enough wit tha hatin
@elo752 the jacket he got on??...pick one up from sallys 4 like 30
bro cut ma hair i have sum wack ass barbers where i live!!!!!
Everything was fine except the fail of that taper. Wow
Taper way to high other than that keep up the good work
going with the grain, will the hair be 1/8 all around?
yall affiliated wit the a cut above in covington, ky
Good shit bro. You got any videos to do afros?
@dariogpb @2XAllState you are so right. Ive been licensed since '93 and I agree with you 100%. Against the grain is a cleaner cut. With the grain will not cut the hair even. The blades push some of the hair down and it doesnt get cut. Now with that said, it doesnt mean that cutting the hair with the grain is wrong. It really depends on the type of cut and what the customer wants. I always ask if its ok if I cut it against the grain and explain what the difference is.
it was dudes hair....not the barbers fault
cut with the grain for better hair texture
eddie winslow...lol jk nice skillz though
Thanks for the info I am a baber / stylist & sometimes where i am from brother 's don't like to share real talent wit a fo real sista on cutt's if yo digg waht i am saying so know that WYE NOTT SHOP in TULSA OKLA loves it
ahahhahaa what if his name was ceasar..
That taper was jacked up. I'd be pissed
05:37 everything just went badd lmaoo
how long have u been cutting hair ?
@2XAllState yes u can cut against the grain and yes waves will still be there,you just have to cut against the grain with a guard on.
that tape was too high in the back
@imtoobased lmaoooo got damnn smh
Good job fam...very educational
where can i get those brushes?
Son neck ashy. LOL Nice cut.
Do you have to get a taper?
He's keepin the waves deep
how do you taper the sides
No front lineup for us
Lmfao . Bad technique
Nice job bruh....
@DpLogan mine too
you cut good
Laughing
Definitely the best barbering vids I've seen on TH-cam. Thx.
Shit!!!
Nice
Hey man, I love your content! Can you please make a video on how to blend a fade? I'm having trouble with blending a fade. I don't understand guidelines....
What is that black stuff on yo neck.
Very Nice!
(-_-,) lmaooooo
I cut against the grain ones on the back of the neck line ( it went bald )... Ended up having to fade it... So it all depends on the hair. This young man knows what he is doing. I have been in the business 27 years. Instead of taking the negative and bashing it in a vocal manner. Take the positive. He is giving you and run with it. Thank you. If you ever want to visit out barbershop. Holla!
Thanks bro watching yo videos got me paid now. I get at least 4 people a day now. Thanks again.
You went a little too high on balding out the taper, but you fixed and gave him a clean blend. Solid work. I don't know why you have so many haters though. The second they see a barber's mess-up there all over it. Instead of discouraging other barbers we should be supporting. People like that aren't going to advance in this business. Peace.
Notice that hole in the ceiling ? Lol
Took the taper too high
Never seen a taper so fucked up lol.. THought he was going all the way up to the crown
Dude face @ 6:30 lmfao!!! I know he was like "what u doin cuz!"
+Jermaine Daye HAHAHA!
Fresh cut, keep up the good work!
@dariogpb right, i was gonna say cant you miss some hairs especially on the hairline? this dude can cut tho i been watching taking notes
this is actually one of the best barber videos i ever scene i recently started cutting my own hair got me a pair of andis liners and a pair of wahl clippers and he gives really good details of course its a little hard to transition to cutting my own head lol but he really helps
good job im trying to lurn all i can since i will be cutting my sons hair to save money!! wish me luck lol
The hair cut was fine continue to work on your judgement on taper. Keep it up license Barbara shut out!
Excellent video. Can't believe this is free. Keep up the great work bro'.
Good job, great explanation and I like the cut. I will practice your style.
Hey I text that number lol, I was looking for advice
what number guard are you using?
the dark skin guy was cute lol
Should b done blending in the back by mid ear
FRESH bro, nice taper!
@dariogpb Thank you!!
He did a pretty good job and I think he used a 1/8" overall great job
why is it bad to go against the grain? someone schools me? what are the pitfalls of it
I enjoy your teaching and this my first time to join you. I hope will become a better baber like you as I keep on leaning from your video everyday. Thanks 🙏🙏